How to Reset the Maintenance Reminder for the 2013 Classic Focus?

[MacReed]

Focus maintenance personnel can press the vehicle's one-touch start button and hold down the SET button on the left side of the multifunction steering wheel until a beep is heard. Then, simply press the OK button on the right side of the multifunction steering wheel to cancel the maintenance reminder. More relevant details are as follows: 1. Exterior Design: The Focus adopts Ford's family-style design, featuring a "Martin" front grille paired with a hexagonal chrome-plated front grille and sharp headlights on both sides. Although the newer Focus models are more dynamic, the classic version still exudes a strong sense of fashion. The side profile features multiple parallel waistlines that highlight the Focus's unique character. The rear is adorned with signature taillights and a multi-layered design, constantly emphasizing its sporty appeal. 2. Configuration: The Focus comes standard with practical and user-friendly features such as front/rear center armrests, rear cup holders, hill start assist, multifunction steering wheel, automatic headlights, power-adjustable mirrors, heated exterior mirrors, and engine start-stop. Additionally, users can opt for advanced tech features like wireless phone charging, automatic parking, and ACC full-speed intelligent adaptive cruise control system based on their actual needs.

[DeMakayla]

I just helped a friend reset the maintenance reminder on a 2013 Focus a few days ago. First, turn the key to the second position where the dashboard lights up but the engine isn't started yet. Then use your left hand to press and hold the square menu reset button on the left side of the steering wheel, while simultaneously pressing the button at the top of the turn signal stalk with your right hand. Keep both buttons pressed without releasing - at this point the dashboard will begin a 10-second countdown. Wait until it counts down from 10 to 0 and displays "Complete", then the warning light will turn off. Pay attention to the timing when pressing the buttons - doing it too early or too late will cause failure. Here's a tip: if it doesn't work the first time, you can turn off the power and try again after restarting. I recommend checking if the car is parked on level ground before operating to avoid distractions during the process.

[ArthurDella]

I've noticed that many people fail in the operation because they overlook the details. First, power on your car to the second gear position—remember, not starting the engine, just having all dashboard lights on. Then, you must simultaneously press and hold two buttons: the reset button in the left control area of the steering wheel and the small dot on top of the turn signal lever. The key point is to hold them down for about 10 seconds without releasing midway. When the dashboard displays a countdown, it means you've done it correctly. Essentially, this process resets the maintenance counter in the car's computer, and with practice, it can be done in just 20 seconds. Additionally, sometimes unstable battery voltage can affect the operation. If it doesn't work after several attempts, it's advisable to start the car to charge the battery a bit and then try again.

[DiElle]

Clearing this maintenance reminder is actually quite simple with just three steps: power on without starting the engine, simultaneously press and hold two buttons (the reset button on the left side of the steering wheel + the top of the turn signal stalk), and hold until the countdown ends. I do it myself after every maintenance, succeeding nine out of ten times. Note that the buttons must be pressed all the way until you hear a click to be effective—many fellow car owners fail because they don't press firmly enough. Additionally, the design of the 2013 Focus is a bit special; the operation must be completed within 30 seconds after powering on. If you miss this time window, you'll need to power cycle and try again. The entire process requires no tools and is much more convenient than going to the dealership.

[DiLola]

As a veteran owner who has driven three Focus models, here's my recommended procedure: After turning on the ignition, immediately press the reset button on the left side of the steering wheel while simultaneously holding the button at the tip of the turn signal stalk. You'll then see the central area of the instrument cluster light up, displaying a countdown from 10 to 0, followed by a completion prompt. The key is to hold both buttons for more than 5 seconds. I once failed the operation because the car wasn't on level ground - the body movement distracted me. Another tip: it's better to perform this during daytime as the instrument backlight at night might make the countdown hard to see. After resetting, the next maintenance mileage will be cleared - just remember to service on schedule.

[VonAlexis]

To reset the maintenance light on a 2013 Focus, locate two specific buttons. One is the menu reset button in the left steering wheel control cluster (square with arrow symbol), and the other is a small dot-shaped button at the very tip of the turn signal stalk. Procedure: 1) Turn ignition to position II (accessory power). 2) Simultaneously press both buttons for about 10 seconds until countdown appears. Technical note: Initiate immediately after power-on - delayed attempts after full ECU boot will fail. If unsuccessful after multiple tries, disconnect negative battery terminal for 5 minutes to reset (rarely needed). Always verify dashboard warning disappearance before shutting off engine.