How to Replace the Rear Wiper of Trumpchi GS4?

[AshleyFitz]

Fully lift the wiper and adjust the angle of the wiper blade, preferably to a 90-degree angle with the wiper arm. Once the wiper blade is separated from the arm, it can be replaced. Precautions for using the wiper: 1. Maintain cleanliness: When there are streak marks on the glass surface, the wiper blade may be dirty. Spray a small amount of alcohol on a towel and wipe the dirty areas and places with residue. Cleaning once a month can improve the wiper's performance. 2. Check the rubber: If there is abnormal noise from the windshield, it may be due to hardening, wear, or cracks in the wiper blade rubber. If the wear is not severe, it can be polished with sandpaper. 3. Avoid sunlight: Try to park the car in a ventilated and cool place.

[EzraAnn]

Last time I replaced the rear wiper on my Trumpchi GS4, it took me less than 10 minutes—pretty straightforward. First, the prep: buy a new wiper blade that matches the GS4 model, like searching 'Trumpchi GS4 rear wiper' online, costing just a few dozen bucks. Turn off the engine first, and reset the wiper switch to avoid accidental activation. Locate the rear wiper arm at the tailgate window, press the clip or button at the end with your fingers, and you can easily remove the old wiper blade. Align the new blade with the slot and snap it in—a 'click' means it’s secured. Test it by turning on the wiper to check if it works properly. If the old one is stuck, don’t yank it—just wiggle it gently to loosen it. Since I drive a lot, I prioritize clear visibility in the rain, so replacing it once a year prevents malfunctions and saves repair costs. No tools needed—bare hands are enough.

[CalebLee]

As someone who enjoys tinkering with cars, replacing the rear wiper on the GAC GS4 is quite satisfying. First, I buy new blades, choosing the right brand like Bosch or genuine domestic products; tools are just my hands, no screwdriver needed. The steps begin: park the car on level ground and turn off the engine. Then, look at the base of the rear wiper arm, find a clip or button, press it while gently pulling out the old blade; after removing the old one, align and hook in the new blade, ensuring the hook is securely fastened. Test the wiper with water to see if it moves smoothly. After replacement, it's best to clean the window glass with a wet cloth to remove residue and extend its lifespan. Related point: aging wiper blades can cause noise or poor wiping, which means it's time to replace them. Don't forget to check them every season, especially before the rainy season—it's particularly useful.

[Dominick]

I replaced the rear wiper of my Trumpchi GS4, and even a beginner can handle it. Purchase new blades that match the model, and make sure the car is turned off. Locate the wiper arm on the rear window, press the release button at the base to remove the old one; align and snap in the new blade. Test the wiping effect. The whole process takes only five minutes and requires no tools. If you lack experience, watch online videos for assistance. Regular replacement ensures clear visibility and enhances safety.

[AustinLee]

As a mom who often drives a GS4, replacing the rear wiper is super easy. First, turn off the car for safety; the rear wiper is by the tail window—just press the clip to release the old blade. When installing the new one, align it at the right angle and snap it securely into place. It's best to choose frameless wiper blades for durability and less rust. After replacing, I always spray some cleaner to maintain the glass and reduce wear. Don’t wait until the wipers fail—replace them before rainy days when visibility drops, which can lead to accidents. Doing it yourself saves fifty bucks and is much faster than taking it to a shop.

[OliviaAnn]

I researched the design of the Trumpchi GS4, and the rear wiper replacement method is quite straightforward. The reason lies in the simple connection structure: locate the end of the wiper arm, which usually has a press button or a hook, press and pull to remove the old blade; just hook the new blade back. Don't overlook matching the blade type, as incorrect sizing can lead to poor wiping. Test the wiper switch to ensure it functions properly; if issues arise, check the circuit or replace parts. Frequent replacement prevents noise and scratches; it's recommended to inspect every six months, with related points including window cleaning frequency, as dirt can accelerate blade wear.