···
Log in / Register

How to Replace the Photo on the Vehicle License?

6Answers
StGianna
07/29/2025, 12:04:37 AM

If you need to reapply for the vehicle license, the process is as follows: 1. Fill out the application form, submit the vehicle for inspection, and provide the required documents. 2. For vehicles not imported through customs or exempt from safety technical inspection as stipulated by the competent department of the State Council for motor vehicle products, a safety technical inspection certificate must also be submitted. 3. The vehicle management office should, within two days of accepting the application, confirm the vehicle, verify the vehicle identification number (VIN) imprint, review the submitted documents, and issue the vehicle registration certificate, license plate, vehicle license, and inspection qualification mark.

Was this review help?
107
Share
EdenLynn
08/12/2025, 11:48:25 AM

Last time I encountered the issue of losing my vehicle license photo, I went to the DMV to resolve it myself, and the whole process was relatively simple. You need to prepare your ID card, the original vehicle registration certificate, and the old vehicle license (if available), then bring these materials to the local DMV or traffic management station. Once there, queue up to get a number, and the staff will guide you to take an on-site photo or upload an electronic one. It’s best to wear a dark-colored top when taking the photo, and the background should be clear. After submission, you’ll receive the new license in one or two business days, with a fee of just a few dozen yuan. Remember to avoid peak hours—go early to minimize waiting time. During my visit, I also had my vehicle lights checked, saving an extra trip. After all, failing to update the photo could cause issues during the annual inspection. It’s a minor hassle but quite straightforward to handle.

Was this review help?
9
Share
Expand All
Cora
10/02/2025, 04:30:06 AM

The photo on my vehicle license had faded and become illegible, so I directly applied for a replacement through the Traffic Management 12123 App, which was super convenient. After downloading the app on my phone and logging into my account, I found the license replacement service and uploaded a clear electronic photo. The photo requirements included a front-facing, bareheaded shot with a solid-colored background. The app guided me step by step through the process. After filling in the information and submitting the application, it took about two or three days for the review to be approved, and the new vehicle license was delivered to my home. This saved me the hassle of going offline, making it perfect for busy young professionals like me who don’t have time to deal with such things. I also make sure to maintain the appearance of my car regularly to avoid any issues with related documents that might affect its resale value.

Was this review help?
10
Share
Expand All
SanRachel
11/15/2025, 10:25:47 PM

Replacing a driver's license photo is no small matter. My neighbor once got the photo format wrong and wasted time. The key is that the photo must meet size requirements: proper length-to-width ratio, clear facial features without obstruction. Bring original ID and vehicle registration documents to the traffic management station. Adjust lighting properly when taking photos, and it's best to prepare a backup digital copy at home and save it on your phone. Don't forget to check if original documents are valid, like ensuring your ID hasn't expired, otherwise it's a wasted trip. Queues at the DMV can be frustrating, so making an appointment in advance can save waiting time.

Was this review help?
17
Share
Expand All
GraceMarie
01/06/2026, 12:02:44 AM

To save money on replacing the driving license photo, I found the simplest way is to use the self-service machine at the local traffic management station. Bring your ID card, vehicle registration certificate, and possibly a one-inch photo. Follow the prompts on the machine to upload or take a photo on the spot, and you can get the new license immediately at a minimal cost. Avoid paying extra for agency services—doing it yourself is more cost-effective. Keep your vehicle clean to reduce the risk of document damage, such as preventing the photo on the driving license from fading by not leaving it in a hot car. After completing the process, remember to update your insurance information promptly.

Was this review help?
11
Share
Expand All
Alexa
04/02/2026, 11:32:35 PM

I personally experienced the steps to replace the vehicle license photo: first, gather required materials such as the original ID card and vehicle registration certificate, then submit the application and take the photo at the DMV. After staff review, the new license is issued within one to two weeks. Pay attention to photo quality throughout the process to avoid rejection—it's recommended to go early in the morning when there are fewer people. This process is related to driving safety, as unclear photos may affect traffic police inspections. I also took the opportunity to check the vehicle's braking system to ensure overall compliance. If the vehicle has modification records, declare them in advance to avoid process delays.

Was this review help?
8
Share
Expand All
More Q&A

How to Start an EFI Motorcycle When the Battery is Dead?

To start an EFI motorcycle when the battery is dead, you can use the kick starter. An EFI motorcycle is a new type of motorcycle that uses a microcomputer to control the fuel injector, supplying fuel only to the cylinders that need to work based on the engine load, unlike traditional carburetor motorcycles. Compared to carburetor motorcycles of the same type, EFI motorcycles can save more than 20% fuel. Due to the implementation of digital ignition and fuel injection, EFI motorcycles have lower fuel consumption and improved emissions, making them more environmentally friendly than carburetor motorcycles, directly meeting the Euro 11 emission standards. They also feature easy starting and stable idle speed.
108
Share

How to Set the Lock Beep Sound for Volkswagen T-Roc?

The method to set the lock beep sound for Volkswagen T-Roc is: 1. Press the vehicle's brake pedal, ensure the gear is in P position, then release the brake pedal; 2. Press the vehicle's one-touch start button twice consecutively, ensuring all four doors are completely closed; 3. Press the lock button on the driver's side door panel once and hold it for more than ten seconds. Taking the T-ROC Volkswagen T-Roc 2020 280TSI DSG 2WD Elite as an example: The manufacturer of this car is FAW-Volkswagen, classified as a compact SUV, equipped with a 7-speed dual-clutch transmission, and designed as a 5-door, 5-seat SUV.
118
Share

What does a license plate starting with Jing A0 represent?

Currently, there are no license plates starting with Jing A0. There are Jing A license plates, which belong to Haidian District of Beijing Municipality. The license plates in Beijing include: Jing A, Jing C, Jing E, Jing F, Jing G, and Jing B (for taxis). License plates are the abbreviation of vehicle license plates and vehicle driving licenses. According to urban and highway traffic management regulations, driving licenses have been renamed as driving permits. Vehicle license plates are hard-numbered plates with registration codes issued by vehicle management authorities after reviewing, inspecting, and registering vehicles that apply for license plates, as stipulated by national vehicle management regulations. License plates, commonly known as vehicle plates, refer to the plates hung on the front and rear of vehicles, usually made of aluminum, iron, plastic, or paper, engraved with the vehicle's registration number, registration area, or other relevant information.
103
Share

How to set the horn sound when locking the 2016 Nissan Sylphy?

The method to set the horn sound when locking the 2016 Nissan Sylphy is to simultaneously press the lock and unlock buttons on the key for 3 seconds. The locking horn sound is designed to remind the driver that the car is securely locked and they can leave with peace of mind. Taking the 2016 Sylphy Classic 1.6XE Manual Comfort Edition as an example: The manufacturer of this car is Dongfeng Nissan, classified as a compact car with a gasoline energy type. The car's dimensions are 4665mm in length, 1700mm in width, and 1505mm in height, with a wheelbase of 2700mm. It is a 4-door, 5-seater sedan with a 5-speed manual transmission and a top speed of 180 km/h.
117
Share

What are the advantages and disadvantages of electronic throttle?

Here are the advantages and disadvantages of electronic throttle: 1. Advantages: (1) Output: It can achieve the best torque output across the entire engine range. (2) Precise control of throttle opening. (3) Improved emission performance: The ETC system precisely controls the air-fuel ratio under various conditions, making combustion more complete. (4) Higher driving reliability: Redundant design allows two sensors to detect each other. When one sensor fails, it can be identified promptly, greatly increasing system reliability and ensuring driving safety. (5) Multiple working modes: Drivers can select different working modes via the mode switch based on different driving needs. Typically, there are three modes: normal mode, power mode, and snow mode, which differ in the throttle's response speed to the accelerator pedal. (6) Altitude compensation: In high-altitude areas, atmospheric pressure drops, the air becomes thinner, and oxygen content decreases, leading to reduced engine output. The electronic throttle control system can compensate for the throttle opening based on the functional relationship between atmospheric pressure and altitude, ensuring a stable relationship between engine output and accelerator pedal position. 2. Disadvantages: (1) Throttle lag during startup: When starting the car, a rich air-fuel mixture is needed. However, the ECU analyzes current vehicle speed, throttle opening, etc., and from the perspectives of fuel economy and reasonable emissions, it limits the throttle opening and restricts the fuel injection system from supplying a rich mixture. (2) Multiple influencing factors: In addition to nonlinear spring effects, stick-slip friction, and backlash nonlinearity, it is also affected by nonlinear damping forces from intake airflow and unstable turbulent resistance moments, making conventional PID control unable to precisely set feedback gains and affecting control accuracy. (3) High cost: The ETC system uses intelligent sensors, fast-response actuators, high-performance control units, and redundant design, significantly increasing costs. Currently, ETC systems are only installed in high-end cars.
102
Share

What is the fuel consumption of the Venucia Star?

The comprehensive fuel consumption of the Venucia Star is 6.1-6.7L/100km. There are currently 3 models of the Venucia Star on sale: the Star Glory Edition and the Star Enjoy Edition, with a comprehensive fuel consumption of 6.1L/100km. The Star Fashion Edition has a comprehensive fuel consumption of 6.7L/100km. The above figures are based on the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 7.3-8.5L/100km. The level of a car's fuel consumption is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase a car's fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not releasing the throttle in advance when approaching a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power output, requiring more gasoline for combustion. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block temperature is low during cold starts, the injected gasoline is less likely to atomize, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
118
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.