···
Log in / Register

How to Replace the Cabin Air Filter in a Touran

6Answers
LaMackenzie
09/06/2025, 01:48:42 AM

Here is the method for replacing the cabin air filter in a Touran: 1. Open the glove box. 2. Remove the screws securing the glove box. 3. Take out the glove box. 4. Locate the compartment for the cabin air filter and remove its cover. 5. Replace with a new cabin air filter. 6. Finally, reassemble the glove box by following the disassembly steps in reverse. Below is some relevant information: 1. When a car is driven with the air conditioning on, it draws in outside air into the cabin. However, the air contains various particles such as dust, pollen, soot, grinding particles, ozone, odors, nitrogen oxides, sulfur dioxide, carbon dioxide, benzene, etc. Without a cabin air filter, these particles can enter the cabin, not only contaminating the car's air conditioning system and reducing the performance of the cooling system but also causing allergic reactions, lung damage, and irritability from ozone exposure, along with the impact of odors, all of which affect driving safety. A high-quality cabin air filter can absorb fine particles, alleviate respiratory discomfort, reduce irritation for allergy sufferers, enhance driving comfort, and protect the air conditioning cooling system. 2. The replacement interval for the Touran's cabin air filter is generally when the car has traveled 40,000 kilometers, but it can also depend on the driving environment. If there are significant variations in environmental humidity and dryness, or if the climate is consistently dry with high levels of wind and sand, the filter should be replaced earlier.

Was this review help?
110
Share
MichaelLee
09/18/2025, 01:38:40 AM

I've been driving a Volkswagen Touran for several years, and changing the air conditioning filter myself is a routine task. The filter is located behind the glove compartment on the passenger side. You need to fully open the glove box, press hard on the clips on both sides or remove the screws to take out the entire compartment to access the filter housing cover. After unscrewing the cover, gently pull out the old filter, being careful not to spread dust everywhere—wearing gloves is more hygienic. When installing the new filter, pay attention to the airflow direction arrow printed on it, ensuring the arrow points toward the fan to avoid affecting air circulation. The whole process takes just a few minutes. It's recommended to replace the filter every 12 months or 15,000 kilometers. For filters, choose a matching model like Mann-Filter, which is affordable and eco-friendly. Doing it yourself costs only a few dozen yuan, saving half the money compared to going to a repair shop. Regular DIY maintenance can help you solve minor car issues effortlessly.

Was this review help?
5
Share
Expand All
GabrielleLynn
11/01/2025, 02:02:16 AM

As a regular car owner, I was also quite worried about making mistakes when changing the air conditioning filter for the first time, so I checked tutorials before starting. The Touran's design is quite user-friendly, with the filter hidden deep inside the glove compartment. After opening the glove box, you'll see a stopper mechanism—just gently push inward or twist to remove the compartment. The filter box has a plastic cover; unscrew the screws and carefully remove the old filter. If it's stuck, avoid pulling hard to prevent damage. Before installing the new filter, confirm the model and direction, aligning it with the airflow indicator. The process is simple, and all you need is a Phillips screwdriver. I recommend buying an activated carbon filter to eliminate odors; after replacement, the air inside the car becomes noticeably fresher. Doing it yourself saves hundreds in labor costs, and with a bit of practice, even beginners can master it. Vehicle maintenance isn't as complicated as it seems.

Was this review help?
4
Share
Expand All
Luna
12/15/2025, 01:10:34 AM

I replaced the Touran's cabin air filter mainly because the odor in the car was getting worse, and the old filter was full of dust and mold, which affected respiratory health. The steps are relatively easy: after turning off the car, open the glove compartment on the passenger side, locate and remove the clip structure inside to reveal the filter housing. Unscrew the screws to take out the old filter and discard it, then insert the new filter with the arrow pointing toward the driver's seat and secure the cover. The whole process takes just a few minutes, and it's recommended to replace it once a year to maintain fresh air. Choosing a universal brand like Bosch for the filter is affordable, costing only about 20-30 yuan. Besides the replacement process, regularly ventilating the car by opening windows can also help reduce the filter's workload. Healthy driving starts with these small details.

Was this review help?
1
Share
Expand All
AmaraLee
02/04/2026, 02:04:29 AM

Safety first. When replacing the cabin air filter, ensure the vehicle is turned off and parked on level ground to prevent sliding risks. The filter is located behind the glove box in the Touran. After opening the box, be cautious of internal spring mechanisms to avoid pinching your fingers. Wear goggles to prevent dust exposure. After removing the housing and screws, inspect the old filter for cracks before disposal. When installing the new filter, strictly follow the airflow direction arrow to prevent AC malfunction. Common mistakes include damaging plastic clips with excessive force or purchasing incompatible filters, wasting money. The entire process takes about 10 minutes. After completion, start the vehicle to test if the AC airflow is unobstructed. Regular maintenance not only saves money but also reduces bacterial growth that can cause respiratory issues. A small DIY effort is more practical than anything else.

Was this review help?
19
Share
Expand All
DeIsabela
04/29/2026, 06:21:17 PM

Quickly sharing my experience of replacing the air filter: The glove compartment on the passenger side of the Touran is the entry point. Open the compartment, press the clips on both sides, and move the compartment aside to reveal the filter cover. Unscrew the cover with a screwdriver, remove the old filter and discard it, then place the new filter in the same direction as the arrow on the old one and secure the cover. Remember to buy the correct size to avoid the hassle of returns. It is recommended to replace it every two years to improve the air quality in the car. The whole process is simple and cost-effective. I usually keep a spare filter on hand and can complete the replacement in less than 15 minutes. Developing a habit of regular maintenance makes the car run more smoothly. It's a small investment for big benefits, and the DIY process is endlessly enjoyable.

Was this review help?
12
Share
Expand All
More Q&A

What to Do When a Sunroof Leaks into the Car?

Here are the causes and solutions for a car sunroof leaking: 1. The sunroof drain is clogged with debris: This prevents water from draining, causing it to seep into the car. Clear the sunroof's drainage channel or use a towel to clean the drain outlet, ensuring water drains properly to the ground. 2. Damaged sunroof seal: This causes poor edge sealing, allowing water to enter the car. Replace the sunroof seal with a new one. 3. Gaps in the sunroof frame: Apply sealant to the sunroof frame. If the vehicle is under warranty, the most straightforward solution is to replace the sunroof frame, which typically takes a professional technician about three days.
116
Share

How to Check the Car Model?

Methods to check the car model: You can look at the vehicle identification plate, which details the manufacturing date, engine displacement, power (kW), and other parameters. The location of the vehicle identification plate varies by car but is generally found on the lower part of the passenger side door; opening the door will reveal it. The car model is a unique identifier assigned to a class of vehicles, consisting of pinyin letters and Arabic numerals. According to national standards, the model of a domestically produced car should indicate the manufacturer, type, and key characteristic parameters. The vehicle identification plate is a tag that displays the basic features of the vehicle, including the manufacturer, model, engine power, total weight, load capacity or passenger capacity, manufacturing number, production date, and manufacturer's name.
103
Share

What brand are the original tires on the Changan CS55?

The original tires on the Changan CS55 are Continental, with specifications of 225/55R18. Continental is a European automotive parts supplier known for its all-weather safety and reliability, low noise, and strong self-cleaning capabilities. It has extremely high instantaneous overload capacity, sensitive handling response and cornering stability, excellent braking performance on both dry and wet surfaces, as well as higher drainage protection capabilities. The Changan CS55 is a compact SUV launched by Changan Automobile, with dimensions of 4500mm in length, 1855mm in width, and 1690mm in height, a wheelbase of 2650mm, and is equipped with a 1.5T turbocharged engine with a maximum power of 115kw, paired with a 6-speed manual or 6-speed automatic transmission.
113
Share

Can I Replace the Air Conditioning Coolant Myself?

Coolant can be replaced by yourself. More information about coolant is as follows: 1. There is a principle to follow when replacing coolant: ensure it is the same brand and model, do not mix different types, add enough amount, and avoid leakage. 2. The full name of coolant is antifreeze coolant. The replacement cycle is generally 2 years or 40,000 kilometers. The actual replacement time should be based on the regulations in the vehicle's user manual. 3. The main component of coolant is ethylene glycol. Its functions mainly include the following: it is not easy to freeze in winter, preventing the engine from being damaged by freezing. In summer, it can cool down the engine, ensuring the engine operates at a suitable temperature all year round. It also provides anti-corrosion protection for the components of the cooling system.
120
Share

What to Do When the Engine Yellow Light Comes On After Driving Through Water

When the engine yellow light comes on after driving through water, it indicates that the engine has encountered a malfunction. It is necessary to check whether the oxygen sensors at the front and rear of the vehicle are functioning properly. If the engine yellow light is on, you can continue driving to a repair center for maintenance. However, if it's a red light, you should shut off the engine immediately. The engine is one of the most important components of a car, consisting of four strokes: intake stroke, compression stroke, power stroke, and exhaust stroke. The engine displacement and the number of cylinders are basic parameters of an engine. Generally, the larger the engine displacement, the greater the engine's output power. The number of cylinders can be checked in the engine's specification section.
117
Share

How to Cancel the Beeping Sound When Reversing in Camry?

There is no way to cancel the beeping sound when reversing in Camry. Below is the relevant introduction of Camry: 1. Functional configuration: Camry is equipped with eight safety configurations including driver/passenger airbags, tire pressure monitoring, and lane departure warning system. Additionally, the car features fourteen comfort and convenience configurations such as front multi-layer soundproof glass, remote start, and cruise control. 2. Power system: It is equipped with a hybrid power system, including a 2.5L L4 engine with a maximum power of 178 horsepower and peak torque of 221 N·m, and a motor with a total power of 120 horsepower and total torque of 202 N·m, matched with an E-CVT transmission, achieving a top speed of 180 km/h.
116
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.