How to remove the wiper of the Boyue?

[CameronFitz]

The method to remove the wiper of the Boyue: first open the buckle of the wiper, then flip the wiper 90 degrees, and finally pull it downward to remove the wiper. The wiper, also known as the windscreen wiper, is a device used to wipe off raindrops and dust attached to the vehicle's windshield to improve the driver's visibility and enhance driving safety. The Boyue is a compact SUV launched by Geely Auto, with dimensions of 4519mm in length, 1831mm in width, and 1694mm in height, and a wheelbase of 2670mm. It is equipped with a 1.8T turbocharged engine, matched with a 7-speed dual-clutch or a 6-speed manual transmission.

[VonCamila]

Last time I changed the wiper blades on my Geely Boyue myself, and it felt super convenient! Remember to park the car in the off position first, letting the wipers stop at the very bottom of the windshield for easier operation. Then gently lift the wiper arm—don’t use too much force to avoid scratching the glass. I recommend placing a towel underneath for extra safety. The Boyue’s wiper blades usually have a hook-type design with a small button or clip in the middle; press it to slide off the old blade. Don’t yank it forcefully when removing, as it might damage the connector—I was too hasty the first time and nearly bent the arm. Before installing the new blade, it’s best to clean the connector to prevent dust buildup from affecting performance. When driving frequently on highways in heavy rain, wiper blades wear out faster. Replacing them promptly not only ensures better visibility but also saves fuel. Give this method a try—it’s a simple few-minute fix!

[StPaige]

As a driver with over a decade of experience, I believe safety details are crucial when removing Geely Boyue wiper blades. First, turn off the engine and set the wipers to maintenance mode, ensuring the arms are upright in the central position. Stabilize the arm with your palm to prevent it from snapping back and causing injury, then check the clip type – Boyue typically uses standard hook-style fasteners. Locate the connection point and press the release tab to remove the old blade. Avoid hastily using tools to pry it open with brute force during the process, as this may damage the windshield. During quarterly wiper inspections, take the opportunity to perform maintenance by checking for rust at the joints that may cause unusual noises. If the wipers stop working, don't force removal; first rule out potential wiper motor failure. After installing new blades, test the wiping action several times to ensure proper fit. This DIY approach not only saves maintenance costs but also cultivates good habits.

[LaRichard]

Direct removal method: After turning off the engine, let the wiper stop at the bottom of the windshield and lift the wiper arm without touching the glass. Locate the connection between the wiper blade and the arm (Boyue generally uses a U-hook design), press the clip button, and slide to remove the old blade. Perform the entire process gently to avoid slipping and damaging components. When installing the new blade, align it with the slot and push it back until it clicks into place (a "click" sound indicates it's secured). Regular cleaning of wipers during daily driving can extend their lifespan.

[VanDante]

In car maintenance, removing wiper blades is a common task but also prone to mistakes—for example, forcibly pulling the wiper arm of a Boyue may deform and damage the glass. Before operation, prepare protective pads such as sponges, gently lift the arm after positioning it in the off mode; most modern hook-type structures can be easily detached by pressing the middle button. Don’t forget to check the accumulated dust on the wiper blades, as this can affect the replacement effect; it’s recommended to perform maintenance every six months to prevent noise issues caused by aging joints. After installing new blades, adjust the angle to ensure full coverage of the field of vision, avoiding potential hazards of poor rain wiping at high speeds, thus ensuring long-term safe driving.

[Autumn]

I'm curious about the removal method for the Boyue wiper blades. Let's start with the principle—it mostly uses a hook-type design similar to ordinary sedans. Turn off the engine and move the wipers to the lowest position, then stabilize the arm with both hands; press the clip to release the old blade, performing all actions gently to avoid scratching the glass. During removal, you can also learn about the wiper system: the motor drives the arm, and the rubber strip on the blade wears out and needs replacement to maintain clear visibility. In fact, the removal method is similar for all car models—mastering this trick saves time and money. After replacement, test the wiping effect to ensure no missed spots. Maintaining good wiper condition while driving long-term can enhance safety.