How to remove the rear seats of the Buick Verano?

[McCharles]

Buick Verano rear seat removal method: There is a pull strap in the middle of the rear seat. Pull the inner side of the strap upward to remove the rear seat; After removing the rear seat, there are also hooks on both sides of the rear seat that need to be removed; After removing the hooks on both sides, there is a release mechanism for the backrest near the door. Pull the handles on both sides to fold down the backrest; The rear seat seatbelt also needs to be unlatched, and then the rear seats can be completely removed. The Buick Verano is a mid-size sports sedan under SAIC-GM Buick. In terms of body dimensions, its length, width, and height are 4723mm, 1802mm, and 1466mm (1476mm) respectively, with a wheelbase of 2700mm.

[DelBryce]

Removing the rear seats of the Buick Verano is actually quite simple, I've done it myself several times. First, you need to remove the seat cushion by forcefully lifting the front edge of the seat near the floor, where two hidden clips are located. Be sure to use a quick burst of force when lifting, and you'll hear a click when it's done. Once the seat is removed, you can see the screws at the bottom of the backrest. Use an appropriate wrench to unscrew the fixing bolts on both sides. At this point, the backrest can be lifted straight up. The whole process just requires a cross wrench and gloves. As a reminder, lay down a carpet beforehand to protect the interior from scratches, especially the leather seats. When reinstalling, make sure the clips are properly aligned and firmly pressed in place to avoid any gaps.

[RuthDella]

I'm a car modification enthusiast and frequently remove and install seats. The key to removing the rear seats of the Verano is locating the clips correctly. There is a metal clip under the front part of the seat cushion on both sides—just pull straight upward with force. After removal, don’t rush to pull the backrest; first, clean out any debris like coins from the seat gaps. The backrest bolts are usually located on the steel frame beneath the seat cushion—loosen them counterclockwise with a 12mm wrench. When lifting the backrest, be careful not to yank the wiring harness connectors, as some models have seatbelt sensors connected. During reinstallation, align the clips with the base grooves and press firmly, then shake the seat to confirm it’s secure. Doing it myself saved me 200 bucks in labor costs, but beginners should check model-specific forum tutorials beforehand.

[DelLena]

Last time I helped my wife clean up drink stains in the back seat, I disassembled the Verano rear seats. It mainly involves two steps: first remove the seat cushion, then the backrest. There are two hooks at the front edge of the seat cushion—locate the positions near the floor mats and lift upwards firmly with both hands. Don't be afraid of the loud noise. After removing the seat cushion, you'll see two nuts on the rear metal frame, so have a 10mm wrench ready. At the bottom of the backrest, there's a plastic cover that needs careful prying. The whole process takes about 15 minutes, but be sure to wear old clothes as the seat frame can easily dirty your sleeves. Once done, take the chance to clean the accumulated hair and dust under the carpet—it'll definitely surprise you.

[SanTucker]

As an auto repair shop assistant, I recommend not using brute force when removing the rear seats of the Verano. The U-shaped clips at the front of the seat cushion require a sudden burst of vertical upward force; pulling slowly and continuously can damage the clips. After removing the seat cushion, you'll find T50 Torx bolts securing the backrest. Important reminder: For models with seat heating, remember to unplug the wiring harness connector first, located under the carpet on the left rear side. The clips are prone to deformation and breakage, so avoid removing and installing them more than three times. When reinstalling, insert the locating pins at the bottom of the backrest into the frame's round holes before tightening the bolts. Finally, crouch down to check the seat gaps and ensure both sides are at the same height for a successful installation.

[EverettFitz]

I've taught this trick to quite a few neighbors. The key to removing the rear seats of the Buick Verano lies in finding the right leverage points. For the two clips under the front edge of the seat cushion, you need to stand inside the car, use your knees against the backrest as a fulcrum, and give a quick, firm pull on the front edge of the cushion with both hands. A 'pop' sound means success, revealing the silver seat brackets. The backrest mounting bolts are 13mm, which standard household tool kits can handle. While you're at it, check the seatbelt anchor points for rust. When reinstalling, make sure to align the positioning pins at the bottom of the backrest first before tightening the screws to ensure the seat sits straight.