How to Open the Fuel Tank Cap on an Older Tiguan Model?

3 Answers
RubyRose
07/30/25 1:15am
Tiguan car fuel tank cap cannot be opened solution is as follows: 1. The Volkswagen Tiguan fuel tank cap can be unlocked via remote control. After unlocking the car, press the fuel tank cap door to open it. If the fuel tank cap still does not open, you can start from the trunk; 2. First, remove the trunk lining covering the fuel tank to expose the fuel tank cap locking mechanism. You will also see a remote-operated fuel tank cap cable. Simply pull the cable to open the fuel tank cap; 3. If this does not work, press the movable part of the locking mechanism while continuously pulling the cable. The fuel tank cap will then open easily. Some models have a dedicated switch on the locking mechanism—pressing this switch will open the fuel tank cap.
Was this review help?
11
4
Share
LaJayce
08/15/25 6:50am
I've been driving an old Tiguan for over ten years and have encountered the issue of the fuel tank cap not opening. Common problems include the cable getting stuck or the locking mechanism failing. In the old Tiguan, the fuel tank cap is linked to the trunk, so first try checking the trunk unlock button. If that doesn't work, the cable might be broken or blocked by debris. In my case, the cable was corroded, and spraying some WD-40 lubricant into the lock hole helped loosen it. If you really can't open it, don't force it to avoid damaging the door or fuel tank opening—just take it to a repair shop to replace the cable, which costs only a few dozen yuan. Regular rust prevention maintenance is important; dry it promptly after rain to avoid rust. Another trick is to open the inner trim panel of the trunk and check if the cable connector is loose. Tightening it yourself can also solve the problem, saving you unnecessary expenses.
Was this review help?
10
5
Share
Expand All
VonBrooklyn
10/20/25 6:01am
It's quite annoying when the fuel tank cap of the old Tiguan won't open. I just dealt with this issue last month. First step, after unlocking the car, don't rush. Gently press the edge of the fuel tank cap to see if it can be pushed open; sometimes mechanical jamming or foreign object blockage causes this. Second step, check the trunk button as it controls the fuel tank cap lock. If pressing it doesn't work, it might be a cable fault or electrical connection issue. I've tried gently tapping the lock position to help lubricate and loosen it, but don't use too much force. Third step, if it still won't open, don't risk damaging it—just drive to the repair shop. They can diagnose and fix it with professional tools, costing between 50 to 150 yuan. Regularly cleaning the lock groove during car washes can prevent such troubles.
Was this review help?
14
4
Share
Expand All
More Forum Discussions

What is the tire model of the Teana?

The Teana tires come in three specifications: 205/65R16, 215/55R17, and 235/40R19. In 205/65R16, the first number 205 represents the tire width of 205MM, 65 indicates the aspect ratio of the tire section is 65%, meaning the section height is 65% of the width, and 16 represents the rim diameter of 16 inches. The letter "R" in the middle stands for radial tire. In 215/55R17, the first number 215 represents the tire width of 215MM, 55 indicates the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, and 17 represents the rim diameter of 17 inches. The letter "R" in the middle stands for radial tire. In 235/40R19, the first number 235 represents the tire width of 235MM, 40 indicates the aspect ratio of the tire section is 40%, meaning the section height is 40% of the width, and 19 represents the rim diameter of 19 inches. The letter "R" in the middle stands for radial tire. The brand of Teana tires is BluEarth E75, and the spare tire specification is non-full size. If you want to replace the tires yourself, you can follow the steps below: Take out the spare tire and jack, place the jack under the frame of the tire to be replaced, ensuring the jack touches the metal part of the frame. Raise the jack until it supports the car. The jack should be positioned under the vehicle. Check and ensure the jack is at a right angle to the ground. Remove the hub cover and loosen the nuts counterclockwise. Do not completely loosen the nuts. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts turn instead of the tire. Turn the nuts counterclockwise until they are loose. Repeat this step for all lug nuts and completely remove the nuts. Place the new tire on the hub, carefully aligning the tire rim with the wheel bolts. Install the lug nuts and tighten them by hand until all nuts are concealed. At this point, the tire replacement is complete. In addition to the model, the tire also has the following common data marked on it: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord. Speed rating: Indicates the maximum speed at which the tire can carry the specified load under specified conditions. Rim specification: Indicates the rim specification compatible with the tire.
10
5
Share

Is the Axela Equipped with a Three-Cylinder Engine?

Axela is not equipped with a three-cylinder engine; it utilizes a four-cylinder engine instead. In terms of powertrain, the Axela offers two engine options: a 1.5L and a 2.0L naturally aspirated engine. The Axela is a model under Changan Mazda, with body dimensions measuring 4582mm in length, 1795mm in width, and 1458mm in height. Building upon an advanced human-machine interface that prioritizes driving safety, the Axela is the first to incorporate the MZD Connect Mazda infotainment system, showcasing a blend of technological sophistication and user-friendly driving experience in its overall configuration.
13
5
Share

What type of suspension does the Audi A6L have?

The Audi A6L features a five-link independent suspension system for both the front and rear. The five-link independent suspension, also known as the multi-link independent suspension, has a relatively simple structure and is lightweight, which reduces the space occupied by the suspension to some extent. This design helps improve the comfort and smoothness of the car during driving. The Audi A6L was the first Audi model introduced to the Chinese market. In terms of appearance, it adopts Audi's new family-style design, with the large hexagonal grille maintaining Audi's signature 'big mouth' design. The headlights on both sides have become more sharp and stylish, complemented by strong straight-line elements, giving the new car a sporty feel.
19
2
Share

Which country does the Langdong belong to?

Langdong is a South Korean car brand, produced in Beijing, and classified as an A-segment model. In terms of body dimensions, the Langdong measures 4570mm in length, 1775mm in width, and 1445mm in height, with a wheelbase of 2700mm. For powertrain, the Langdong is equipped with 1.6L and 1.8L naturally aspirated engines. In terms of exterior design, the Langdong follows Hyundai's family-style fluidic sculpture design concept, maintaining a sporty style similar to its predecessor. Compared to the older model, the Langdong's taillights have undergone noticeable changes, becoming more rounded. The front fascia still retains the typical family look, with fewer sharp lines and more fullness, appearing more harmonious and balanced.
10
5
Share

Will the car move forward if the accelerator is pressed in neutral?

Pressing the accelerator in neutral will not make the car move forward. There is no significant harm in pressing the accelerator in neutral, but it mainly wastes fuel. Typically, pressing the accelerator once in neutral consumes about 6 milliliters of fuel. Here is some relevant information about pressing the accelerator in neutral: Short-term traffic jams: During short-term traffic jams, it is recommended for manual transmission vehicles to shift into neutral and engage the handbrake; for automatic transmission vehicles, shift into N gear and engage the handbrake. Doing so allows the driver to relax and free up both hands and feet. Other hazards: If the clutch and brake are pressed for a long time, it will increase the burden on the legs. Once numbness is felt, it can easily lead to stalling or even a sudden rear-end collision with the vehicle in front.
18
3
Share

Can Previous Scores Be Retained When Transferring to Another Driving School?

Transferring schools allows for the retention of previous scores. If within the same region, you only need to go to the local vehicle management office to transfer your student records to the current driving school. For different regions, you need to retrieve your records from the original vehicle management office and submit them to the current one. Below are some considerations regarding transferring driving schools: 1. Time: Key aspects to focus on: theoretical study time, initial exam time, final exam time, license collection time, practice time and its flexibility, ensuring the driving school's promised schedule meets your requirements. 2. Pick-up and Shuttle Services: Detailed location of the training ground, availability of pick-up services, presence of shuttle buses or public transportation, their schedules and operational status, etc.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.