How to Open the Front Hood of Geely Boyue?

[DelRylee]

Method to open the front hood of Geely Boyue: The engine hood switch is located in the control area on the left side of the steering wheel, where there is an unlock button. Simply press it gently, and the engine hood will pop up slightly with a "click" sound to unlock. Then, there is another latch position below the engine hood, in the middle of the front hood. Pull the latch to open the engine hood. The Geely Boyue is a compact SUV equipped with a 1.8T turbocharged engine, delivering a maximum horsepower of 163 hp, paired with a 6-speed manual transmission. The dimensions of the Geely Boyue are 4519mm in length, 1831mm in width, and 1694mm in height, with a wheelbase of 1670mm. It has a top speed of 195 km/h and a fuel tank capacity of 58L.

[MorganDella]

I remember the first time I opened the Bonnet of my Boyue, I was a bit nervous, but it's actually simple once you locate the right spots. First, sit in the driver's seat and look down near the left foot pedal – there's a pull handle usually marked with a bonnet icon. Give it a firm pull, and you'll hear a click. Then, walk to the front of the car, and below the central Geely emblem, you'll find a small groove. Slide your fingers in to feel the release lever inside, and pull it outward or push it upward – the exact angle depends on the model year; for the Boyue, it's typically a push. Next, lift the bonnet, and it will open on its own. Don't forget to secure it with the support rod to prevent it from falling. The whole process takes about a minute, but remember to wait until the engine has cooled down before doing this – don’t attempt it right after driving to avoid burns. If it feels hard to open, the lever might not be fully released or could be rusty. Try gently rocking the bonnet up and down to assist. If it still won’t budge, check the owner’s manual or visit a nearby repair shop for help. Regularly opening the bonnet to check the oil and coolant is also important to prevent minor issues.

[MatthewAnn]

Opening the Bonnet of the Boyue is actually quite simple; I've tried it several times. First, sit in the driver's seat, and you'll find a small lever on the floor near your left leg, shaped like a bonnet icon. Pull it, and you'll feel it unlock. Then, go to the front of the car, crouch down, and locate a small hole or handle beneath the grille. Reach in and push the release latch upwards. If done correctly, the bonnet will pop up. Lift it to its highest position and secure it with the support rod to ensure safety. The key points are to make sure the car is not running and the engine is cool, otherwise thermal expansion might cause it to stick. Some Boyue models have slight variations in the release mechanism, so if it's difficult to open, don't force it—just handle it gently. It's recommended to open it once a month to check various fluid levels and inspect the belts for cracks, which helps in identifying potential issues early.

[MacChristian]

Opening the Hood of Geely Boyue: Enter the driver's seat and pull the lever on the floor near your left foot; proceed to the front of the car, pull the small release handle outward beneath the logo; lift the hood and secure it with the support rod. Be cautious of engine cooling to prevent accidents.

[StAdaline]

Last time I opened the Bonnet of the Boyue, it went smoothly. Sitting in the car, I found the bonnet release handle near my left foot and pulled it. Then, I walked to the front of the car, bent down, and spotted a small hook underneath, usually made of plastic. A gentle push with my finger released the bonnet. I lifted it slowly and propped it up with the support rod. The whole process was easy and pleasant, but if it's your first time, you might feel a bit unfamiliar. I recommend trying it during the day when the light is good. Don’t forget to open the bonnet regularly to clean the dust in the engine bay, as accumulated dust can affect heat dissipation.

[AnthonyDella]

I'm familiar with the steps to open the Bonnet. First, pull the release lever near your left foot in the driver's seat—you'll hear a click. Then, go to the front of the car, feel for the small internal latch at the bottom of the front grille, and push or pull it upwards. The key is the simple mechanical linkage: the lever drives a cable to unlock the latch. After lifting the hood, make sure the support rod is secure—safety first to avoid pinched fingers. If it won't open, the cable might be aged or stuck; try applying some lubricant. By the way, this car's hood has a lightweight design for easy operation, and regular checks can extend its lifespan.