How to Identify the Front and Back of Michelin Tires?

How to Use the Seat Heating in the Tayron?

The method to use the seat heating in the Tayron is: 1. Turn on the ignition switch; 2. Adjust the seat temperature level via the heating switch button located below the center console. The Tayron is a mid-size 5-door, 5-seat SUV with the following dimensions: length 4589mm, width 1860mm, height 1660mm, wheelbase 2731mm, and a fuel tank capacity of 60 liters. It is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW at 5000-6000 rpm and a maximum torque of 250 Nm at 1750-3000 rpm. The drive system is front-wheel drive, with a front MacPherson independent suspension and a rear multi-link independent suspension.

2

1

Share

What is the reason for fully depressing the clutch when shifting gears in the Haval H6?

Haval H6 requires fully depressing the clutch when shifting gears due to excessive clutch free play and the need to protect the transmission. Excessive clutch free play: This is usually caused by air in the master or slave cylinder, or wear of clutch components. Protecting the transmission: Fully depressing the clutch during gear shifting is to completely disconnect the engine from the transmission gears. It involves changing the gear set through the gear lever and then re-engaging. If the clutch is not fully depressed during gear engagement, there will be a significant speed difference between the shifting gear set and the transmission gear set, making smooth meshing difficult. In mild cases, this accelerates wear, while severe cases may cause gear grinding and damage to the transmission.

20

0

Share

Can an Automatic Transmission Car Move When the Brake is Released?

An automatic transmission car may not necessarily move when the brake is released, as it depends on the actual situation. Here's the analysis: 1. Different gears have different behaviors: Normally, if the gear is in D (Drive), R (Reverse), or L (Low), the car will move when the brake is released. In other gears, it generally won't move. 2. Situations where the car won't move when the brake is released include: the car being on a very steep slope. Additionally, some cars' transmissions are set up not to start without pressing the accelerator. 3. Additional information: An automatic transmission eliminates the need for the driver to manually shift gears, as the vehicle automatically selects the appropriate gear based on speed and traffic conditions. Common types of automatic transmissions in cars include: hydraulic automatic transmission, hydrostatic transmission, electric transmission, stepped mechanical automatic transmission, and continuously variable transmission (CVT).

3

5

Share

Is It Normal for the Car to Idle at 1500 RPM When Starting in Summer?

It is normal for the car to idle around 1500 RPM when starting in summer. During startup, the vehicle experiences a cold fast idle, meaning the engine is cold, and the air-fuel mixture cannot burn stably. The engine is also just beginning to operate, so the idle speed is increased to prevent stalling. Unstable idling can lead to the following hazards: High idle speed: If the car idles too high, check for loose or leaking intake manifolds, as this will significantly increase fuel consumption and accelerate engine carbon buildup. Low idle speed: If the car idles too low, there is a risk of stalling while driving, posing a safety hazard. Fluctuating idle speed: If the idle speed fluctuates, it may indicate that the spark plugs or ignition coils are not functioning properly, causing the engine pistons to misfire and resulting in severe vibrations.

2

Share

Which gear to use for long downhill slopes?

Automatic transmission vehicles can use the D gear for downhill driving, and those equipped with an L gear can use the L gear. Below are the relevant details about downhill gears: Reason for using the L gear: When descending a mountain or a long slope, shifting into the L gear restricts the car's gear to the lowest gear (equivalent to first gear in a manual transmission car), allowing the vehicle to use engine braking during the descent. This prevents the driver from having to continuously apply the brakes, which could lead to overheating of the brake pads and potential hazards. Important notes: When driving an automatic transmission, remember not to shift into neutral before a red light or during downhill driving. Instead, keep the transmission in drive and control the speed using the gear and brakes to avoid accidents.

16

5

Share

What does rail pressure positive deviation exceeding the limit mean?

Rail pressure positive deviation exceeding the limit means one of the most common fault nominal terms in the electronically controlled high-pressure common rail system. In addition, there are rail pressure negative deviation, rail pressure too low, and rail pressure too high. Below is a detailed introduction to rail pressure positive deviation exceeding the limit: The deviation of rail pressure equals the set rail pressure minus the actual rail pressure. If the resulting value is positive, it is a positive deviation; if negative, it is a negative deviation. A positive deviation means the actual rail pressure is low, while a negative deviation means the actual rail pressure is high. For rail pressure positive deviation exceeding the limit, factors such as fuel pump pressure, whether the nozzle is leaking or blocked, and rail pressure sensor failure should be considered. It is recommended that the owner promptly go to a repair station for inspection and take corresponding solutions to avoid affecting vehicle use.

11

1

Share

How to Identify the Front and Back of Michelin Tires?

How to Use the Seat Heating in the Tayron?

What is the reason for fully depressing the clutch when shifting gears in the Haval H6?

Can an Automatic Transmission Car Move When the Brake is Released?

Is It Normal for the Car to Idle at 1500 RPM When Starting in Summer?

Which gear to use for long downhill slopes?

What does rail pressure positive deviation exceeding the limit mean?

Does the Trunk Provide Heat Insulation in Summer?

What is the emission standard for the 2013 Excelle?

What are the reasons for the oil gauge indicating insufficient engine oil?

What are the advantages and disadvantages of joint venture cars and domestic cars?