How to Fold Down the Rear Seats of Borgward BX7?

[SanCatherine]

Locate the gray pull straps on both sides of the rear seats and pull them firmly to fold down the seats. Below is some information about the Borgward BX7: 1. Introduction: The Borgward BX7 is a mid-size SUV positioned in the 200,000 RMB price range and is the first SUV model launched after Borgward's revival. 2. Space: The Borgward BX7 offers two seating configurations—5-seater and 7-seater—with a 2760mm wheelbase and a 1911mm wide-body design. 3. Powertrain: The Borgward BX7 is equipped with a 2.0T turbocharged direct-injection engine, delivering a maximum power of 165kw and a peak torque of 300N·m.

[VonJuliana]

My family owns a Borgward BX7, and it's really convenient for moving or loading large luggage during outings by folding down the rear seats. The operation is quite simple: sit in the back seat, adjust the headrest to a suitable position to avoid it getting stuck. Then, near the door on the side of the seat back, you'll find two release levers or pull loops, usually made of metal or plastic, one on the left and one on the right. Pull them up with a bit of force. Next, push the seat forward slightly, and it will automatically fold down to be level with the floor. If it doesn't move smoothly, there might be debris stuck or the lever might be worn. Remember to ensure there are no heavy items in the trunk before operating to avoid damaging the seat mechanism. After folding, the space becomes much larger – last time, we even transported a bicycle, super practical. To return it to the original position, just push it back in reverse until you hear the locking sound, indicating it's securely fixed.

[StColton]

As an enthusiast who frequently works on DIY car repairs, the rear seat design of the Borgward BX7 is quite standard, with the key point being the control of the seat latch hook. Open the rear door, crouch down to inspect the edge of the seat—there's usually a small protruding pull tab or strap. Grab it with your hand and pull it toward yourself. This action releases the latch hook, causing the front of the seat to lift slightly. Then, push the entire backrest forward to fold it down. If it doesn't fold down in one go, the hook might not be fully disengaged or the adjustment angle might be incorrect, requiring you to pull the handle again. This design is for safety, preventing accidental tipping that could injure someone or deform the seat. After handling, ensure the seat is fully secured, as it can be dangerous if it shakes while driving. I think this also applies to other SUV models—for example, when cleaning the interior, folding the seats first makes vacuuming easier.

[JosieAnn]

Hey, I'm a regular car owner, sharing simple steps to fold down the BX7 rear seats: First, locate the release handle on the back of the rear seat, near the rear door. Pull it upward with your hand until you feel the latch disengage. Then gently push the seat forward, and it will fold down. Job done.

[ZoeyLynn]

When taking the kids out, I often fold down the BX7's rear seats to make more room for the stroller. First, check the trunk is clear to avoid obstacles. Then, reach in from the rear side door, locate the pull strap or button on the side of the seat, and give it a tug to tilt the seat down. The folding process is smooth, but be careful not to push too hard and damage the springs or your fingers. Once folded, the trunk space expands significantly—enough to fit two extra large suitcases in my experience. Always remember to securely lock the seats back in place after use. This is also related to routine maintenance, like keeping the mechanisms rust-free for smoother operation.

[VonSophia]

As a safety-conscious user, be careful when folding down the Borgward BX7 rear seats. First, ensure the doors are locked to prevent accidental operation. Locate the release mechanism behind or on the side of the seat back, and avoid using excessive force when pulling it to prevent damaging components. Gently tilt the seat forward until it lies flat. After completion, check the locking tightness by giving it a slight shake—no movement means it's secure. If you encounter significant resistance, it might indicate an obstruction or mechanical issue requiring inspection. A friendly reminder: prolonged folding may cause leather creases or frame wear, so restore the seats when not in use. This process is similar to childproofing against toy mishaps.