How to eliminate the small wrench symbol on the JAC Refine S3?

[DiJourney]

The method to reset the maintenance light on the JAC Refine S3 is as follows: 1. Press the reset button and turn off the ignition. 2. Hold the reset button until the mileage display disappears. 3. While holding the reset button, turn the ignition back on to complete the reset. Additional Information: The maintenance light serves to record the mileage of critical components, reminding the owner to perform maintenance. The JAC Refine S3 is a compact SUV with the following dimensions: length 4345mm, width 1765mm, height 1640mm, wheelbase 2560mm, and a fuel tank capacity of 45 liters. It is equipped with a 1.5L naturally aspirated engine producing a maximum power of 85kW at 6000 rpm.

[SanChase]

I've been driving my JAC Refine S3 for several years, and that little wrench is the maintenance reminder light, which needs to be manually reset to stop it from being annoying. The reset method is super simple: First, turn off the engine and remove the key; then locate the TRIP button in the middle of the dashboard and hold it down; at this point, turn the key to the ON position without starting the engine; hold for a few seconds and watch the dashboard—the wrench icon will either flash or disappear; release the button, and you're done. After that, turn off the key and restart the car to see if the light is still there. If it hasn't disappeared, repeat the process or check if the maintenance has been done. I always reset it right after maintenance. Last time, I forgot to check before a long trip, and then the tire wear warning came on—what a hassle. Remember, after resetting, make sure the oil and filter changes are properly done. Don’t ignore the reminder just to save trouble; if the engine has issues, it’ll be a real headache.

[StArcher]

When I first started using the JAC Refine S3, the little wrench icon left me completely baffled. A friend taught me that it was just a reminder for maintenance. The steps to reset it aren't difficult: turn off the engine and remove the key, then press and hold the TRIP button on the dashboard; turn the key to the ACC position; wait patiently for about 5 seconds until the wrench disappears before releasing. During my first attempt, I was all thumbs and it took me two tries to succeed. After resetting, it's recommended to immediately check if new engine oil has been changed to prevent the light from coming on prematurely next time. My car frequently displayed this after 40,000 kilometers, but performing timely maintenance after resetting can help protect the engine and extend its lifespan.

[DelEden]

I'm used to dealing with the small wrench warning while driving, just press a few times on the JAC Refine S3 to fix it: turn off the engine, hold the button; turn the key to the pre-start position; wait until the prompt changes. Don't delay in clearing it, make sure to perform the maintenance first before operating, so the system won't repeatedly remind you and affect your driving mood.

[AlejandroDella]

As a cautious car owner, I always confirm maintenance before clearing the wrench warning light. The method is: turn off the engine, press the dashboard button; turn the key to the ON position; hold until the light goes off. After clearing, regularly check the vehicle condition. Ignoring it may lead to part wear such as brake system issues, affecting safety.

[DelilahRose]

My JAC Refine S3 has been running for five or six years, and clearing the wrench icon is routine: turn off the engine, pull out the key, press and hold the TRIP button; turn the key to ON without starting; wait for the prompt to disappear before releasing. It's best to perform this right after maintenance to reduce the risk of false alarms causing malfunctions.