···
Log in / Register

Can a driver's license be collected by someone else?

6Answers
SanChristian
09/03/2025, 11:33:09 PM

Driver's licenses can be collected by someone else. Here are the details about collecting a driver's license: Notes for proxy collection: The proxy must bring their own ID card and the ID card of the principal. It is best to have a signed authorization letter from both the proxy and the principal as proof of authorization. This makes it easier for the driving school to process, as driving schools also aim to prevent unauthorized collection by others. Additionally, this is a responsible practice by the driving school, though there are no specific regulations requiring it. Relevant regulations: According to Article 57 of the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses,' motor vehicle drivers should apply for renewal at the vehicle management office of the driver's license issuing authority within 90 days before the expiration of their current driver's license.

Was this review help?
115
Share
DelAdaline
09/16/2025, 12:41:57 AM

I've had my share of experiences with collecting the driver's license after passing the test. Once when I was too busy with work, I thought about having my wife pick it up for me. But when she went to the DMV, they immediately said no—it had to be me in person because they needed to verify my face or check my ID on the spot to prevent fraud. The staff explained that it's a national rule since the license carries personal details, and they can't risk someone else claiming it. Some places might accept a proxy, but you'd need a notarized written authorization in advance, which is not only a hassle but also unlikely to be approved. My advice? Just make time to collect it yourself. Don't cut corners to save a little time only to end up with bigger headaches and wasted trips. That time, I ended up wasting more time and had to queue for hours on a weekend to get it done—honestly, it would've been better to plan ahead.

Was this review help?
2
Share
Expand All
StKennedy
10/30/2025, 01:17:02 AM

Getting a driver's license on someone else's behalf is practically impossible. From my experience, the DMV's procedures are extremely strict—you must appear in person for identity verification, like fingerprint or ID scanning, to prevent fraud and risks. Unless under special circumstances like emergencies or business trips, you'd need a notarized authorization letter, and the proxy must bring all required documents to try, but they often get rejected. I remember when my nephew asked me to pick up his license for him—it was a wasted trip with no success. It might sound simple, but it's actually time-consuming and effort-intensive. It's better to make time and go yourself. Policies also vary by location, so checking the local DMV website or calling ahead is always a good idea.

Was this review help?
18
Share
Expand All
ReeseRose
12/13/2025, 12:24:59 AM

You can't have someone else pick up your driver's license for you—that's a hard rule. When I went to get mine, the DMV had strict requirements: you must appear in person to verify your identity, otherwise the risk is too high. Authorizing someone else to pick it up is very rare and requires a bunch of documents like a power of attorney and notarization, but most places won't accept it. The key issue is that driver's licenses involve personal information, and having someone else pick it up can easily lead to mistakes. My advice? Go to the official agency yourself to get it—it'll save you a lot of hassle.

Was this review help?
6
Share
Expand All
DiLondyn
02/02/2026, 01:30:01 AM

Picking up a driver's license for someone else? Basically no chance. The DMV has strict rules—you must collect it in person for identity verification to prevent security loopholes. If you're really in a hurry, check official regulations to see if authorized delegation is possible. That requires preparing a written power of attorney and notarization, then having the proxy bring documents to try, but the success rate is low. It's better to make time to collect it yourself—saves hassle and time. My friend tried proxy pickup last time, wasted effort and caused delays.

Was this review help?
15
Share
Expand All
VonEden
04/27/2026, 06:21:10 PM

That time helping my cousin pick up his driver's license became a lesson. He was out of town and asked me to go to the DMV with an authorization letter. The staff checked it and shook their head, saying it wouldn't work—he had to be there in person for facial recognition. They explained it was a regulation to prevent issues caused by fraudulent use of licenses. In the end, my cousin had to return to his hometown to reapply, wasting several days. This made me realize that important documents can't simply be delegated.

Was this review help?
19
Share
Expand All
More Q&A

What is the ground clearance of the Baojun 510 in centimeters?

Under full load, the minimum ground clearance of the Baojun 510 is 160mm. The minimum ground clearance refers to the distance between the lowest point of the car (excluding the wheels) and the supporting plane when the car is fully loaded and stationary, which is used to evaluate the car's ability to pass obstacles such as rocks and tree stumps without collision. The heavier the body, the better the high-speed driving stability. Factors affecting the stability of a car at high speed include: 1. Vehicle tires: Tires are the only components in contact with the ground. Generally, wider and flatter tires improve the stability of the vehicle at high speeds. 2. Vehicle shape: The shape of the vehicle also affects its high-speed stability. Vehicles that are more aerodynamically designed tend to be more stable at high speeds. 3. Drive configuration: Most vehicle drive configurations include front-wheel drive, rear-wheel drive, and four-wheel drive. Four-wheel drive vehicles are more stable than front or rear-wheel drive vehicles. 4. Suspension system: Generally, vehicles with independent suspension systems are more stable than those with non-independent suspension systems. Independent suspensions include MacPherson strut independent suspension and multi-link independent suspension.
101
Share

Can modified LED headlights pass the annual inspection?

Modified LED headlights can pass the annual inspection, as headlights are not considered part of the vehicle's exterior and can easily pass the annual check. The annual inspection for headlights only focuses on two aspects: first, whether the brightness meets the standard (currently, there is only a minimum lumen requirement, with brightness not allowed to be lower than 1400 lumens), and second, whether the angle is qualified. As long as the angles of the high and low beams are correct, the inspection can be safely passed. A notable feature of LED headlights is that they are composed of numerous small, high-brightness LED bulbs, usually arranged in specific shapes, such as a light strip or a large continuous area. In contrast, xenon headlights are generally independent units, although some vehicle models may use dual xenon headlights.
103
Share

What are the steps for removing and installing car headlights?

The steps for removing and installing car headlights are: After opening the engine compartment hood, you can see the dust cover behind the headlight assembly. Simply unscrew it along the threaded direction, and then you will see the bulb base inside the headlight assembly. Pinch the wire clip spring next to the base, and once the clip is released, you can remove the bulb. During installation, simply reinstall it back into the car following the same steps. When replacing car headlight bulbs, the first step is to confirm the bulb socket of the vehicle and purchase bulbs with the corresponding socket for replacement. The replacement bulbs do not necessarily need to be original equipment manufacturer (OEM) parts, as long as the bulbs meet the required specifications. Disconnect the bulb's power socket, applying moderate force when pulling it out to avoid loosening the wiring or damaging the bulb socket.
101
Share

Does idling a car consume fuel?

Idling a car does consume fuel, as the engine burns fuel whenever it is running, though fuel consumption is relatively low during normal idle conditions. During idling, the engine is still operating but not transmitting kinetic energy to the drivetrain. According to the law of energy conservation, driving requires more work than idling, resulting in higher fuel consumption. Car idling refers to an operational state where the engine runs without load, meaning the transmission is in neutral. The engine speed during idling is called the idle speed, which can be adjusted by modifying the throttle opening. Idling means the engine is running without delivering power; when the accelerator pedal is fully released, the engine enters idle mode. Adjusting idle speed should avoid sudden fluctuations to prevent premature engine wear.
108
Share

How to Deal with Engine Oil Leakage?

Oil leakage will definitely cause a significant loss of engine oil, and the cause should be identified immediately for repair. Here is some knowledge about car oil leakage: 1. Causes of oil leakage: Seepage is more related to the poor sealing of rubber seals, while leakage is likely due to direct rupture of the sealing area, such as cylinder block cracking or damage to related components. 2. Engine oil seepage phenomenon: If the engine shows obvious oil seepage, it is likely to significantly increase oil consumption. The consequence of oil loss is severe wear and tear on the engine.
112
Share

How to Properly Adjust Rearview Mirrors?

When adjusting rearview mirrors, it is essential to set them to a suitable viewing angle based on your seating posture. Here are some tips for adjusting rearview mirrors: 1. Left rearview mirror: When adjusting the left rearview mirror, ensure you can see both the car body and obstacles clearly on the left rear. The optimal angle is to adjust the left rearview mirror vertically so that the sky and ground each occupy half of the mirror's upper and lower parts. Horizontally, adjust it so that the car body occupies about 1/4 of the mirror's area, allowing visibility of the rear door handle. 2. Right rearview mirror: When adjusting the right rearview mirror, ensure it is adjusted vertically so that the sky occupies about 1/4 of the upper part of the mirror. Horizontally, adjust it so that the car body occupies about 1/4 of the mirror's area, allowing visibility of the rear door handle.
101
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.