How to cancel the wrench light on Hanteng X5?

[Annie]

The method to cancel the wrench light on Hanteng X5: Insert the key into the ignition switch, press and hold the small black stick on the instrument panel, power on the car, and then release the small stick on the instrument panel. The Hanteng X5 is a model under Hanteng Motors, with dimensions of 4501mm in length, 1820mm in width, and 1648mm in height, and a wheelbase of 2600mm. In terms of interior, the car features a warm dual-tone interior design with wood grain trim panels, and a 9-inch central control screen equipped with the Hanteng Cloud Intelligent Networking Service System, providing functions such as remote diagnosis, remote control, and navigation. In terms of configuration, the car is equipped with one-button start-stop, EPB electronic handbrake, automatic parking, panoramic sunroof, etc.

[GabriellaRose]

Last time I drove my Hanteng X5, I also encountered this little wrench warning light. It took me a long time to get rid of it. This is the maintenance reminder light, which stays on if the dealership didn't reset it after servicing. It's actually quite simple to do it yourself: turn the key to the 'ON' position (don't start the engine) until all dashboard lights illuminate. Then press and hold the small cylindrical button on the right side of the instrument cluster. You'll see the wrench icon start blinking – keep holding for about 10 seconds until it disappears. If that doesn't work, try a complete power reset: disconnect the negative battery terminal for five minutes and reconnect it. This will also make the wrench light go away, though you'll need to reset your windows, clock, and the trip computer data will be cleared.

[Winifred]

The small wrench symbol on the HanTeng X5 indicates that the maintenance counter has expired. There are two reset methods depending on the model year: For 2017-2019 models, turn off the ignition, hold the TRIP button (small button at the lower right of the instrument cluster), turn the key to the ON position, and release when the wrench disappears. For 2020 and later models, simply hold the TRIP button for 10 seconds. Check if a reset prompt appears near the odometer display. If DIY fails, any quick-service shop can clear it with a diagnostic tool in five minutes. After reset, the next maintenance reminder will automatically calculate at around 5,000 km - don't mistake this as eliminating maintenance needs.

[DeLondon]

Teach yourself to reset the maintenance light: First, get in the car and press the start button twice without stepping on the brake to power on. Then, press and hold the small black button at the bottom right of the speedometer on the dashboard for about seven to eight seconds. The wrench icon will start flashing—keep holding until the flashing stops and disappears. Do not turn the key back during this process. This operation essentially resets the maintenance reminder in the car's computer. Some owners report that the light reappears after restarting the engine, which may indicate an incomplete reset during the last maintenance. In such cases, it's recommended to visit a service center for a proper maintenance reset. Regularly cleaning the dashboard buttons during car washes can help prevent poor contact issues.

[LeSophia]

It's indeed annoying when a yellow wrench icon suddenly pops up on the dashboard while driving. This warning is usually mileage-related, indicating it's time for maintenance. Resetting it is simple: turn off the engine, press and hold the dashboard button, then turn the key to the ignition-on position and wait for 15 seconds. After successful reset, the next reminder will appear according to the set interval. If the light remains after several attempts, it might be because the technician forgot to reset the system after the last service, or a sensor connection is loose. By the way, after maintenance, the 4S shop must use a computer to reset the vehicle maintenance record, otherwise it might be mistakenly considered overdue, leading to warranty voidance.

[VanCharles]

Hanteng Owners: Key Three Steps for Maintenance Light Reset: 1. Turn off the engine. 2. Press and hold the mileage reset button at the lower right corner of the dashboard. 3. Turn the key to the power-on position (dashboard lights on but engine off). Hold for about 15 seconds until the wrench symbol disappears. The most common reasons for reset failure are insufficient button press time or not operating in the power-on state. Special reminder: Drive about two kilometers after reset to allow the system to confirm; short trips may not save the settings. If unsure about the operation method, check page 87 of the owner's manual for illustrated instructions.