···
Log in / Register

How to adjust the rearview mirror on the Geely Boyue?

6Answers
FernandoDella
07/24/2025, 11:15:48 PM

Geely Boyue rearview mirror adjustment method is as follows: 1. When the ignition switch is in the ACC or ON position, rotate the rearview mirror adjustment switch to L (left) or R (right) to select the mirror to be adjusted. 2. Push the rearview mirror adjustment switch left, right, up, or down to adjust the mirror. 3. After adjustment, turn the left and right rearview mirror adjustment switch to the 0 (middle) position. 4. Additional information: When the ignition switch is in the OFF, ACC, or ON position, rotate the outer rearview mirror adjustment switch knob to the upper left corner position to simultaneously fold both left and right outer rearview mirrors.

Was this review help?
102
Share
VanTucker
08/11/2025, 07:58:50 AM

Adjusting the mirrors on the Geely Boyue, as an ordinary owner, I’d like to share a practical method. After sitting in the driver’s seat, first adjust the seat position for comfort. Then locate the control area on the inner side of the door, where there’s a small joystick and left/right selection buttons. Press the selection button to choose the left mirror, then gently push the joystick to adjust the mirror angle up, down, left, or right until you can see a bit of your car’s side and the road behind. Repeat the same steps for the right mirror. The key is to ensure the mirror’s coverage includes blind spots—avoid just seeing the sky or ground. I often lend my car to others, so I have to readjust the mirrors each time, as different people’s eye heights affect safety. The Boyue also has a mirror heating function, which helps defog and defrost the mirrors in rainy weather, keeping them clear. Safe driving starts with these small details. Regularly cleaning the mirror surfaces is also important to ensure visibility isn’t compromised by dust, reducing the risk of accidents.

Was this review help?
3
Share
Expand All
LaJocelyn
09/26/2025, 11:13:13 PM

As a car enthusiast, I often teach friends how to adjust the rearview mirrors on the Geely Boyue. The operation is done directly on the door armrest: there's a small panel with a selector switch marked left/right and a directional joystick. Toggle to the left icon to control the left mirror, toggle to the right for the right mirror, then use the joystick to fine-tune the mirror to the optimal angle. The ideal position is when you can see a small portion of your rear wheel in the mirror while maintaining good side visibility to minimize blind spots. The power-adjustable design makes it effortless, whereas older manual versions require rotating the mirror holder for adjustment. It's best to perform this adjustment when parked on level ground, then test drive to check the results. The Boyue's heating function quickly defrosts mirrors, which is very convenient in winter. Keeping mirrors clean and free from scratches that could obstruct vision is a small detail that significantly enhances daily driving safety.

Was this review help?
20
Share
Expand All
JeremiahRose
11/10/2025, 12:12:51 AM

I drive a Geely Boyue, and I find adjusting the rearview mirrors quite simple. After settling into the driver's seat, locate the control panel near the left door. Press the button marked L or R to select the mirror, then use the circular joystick to adjust the angle up, down, left, or right. The goal is to position the mirror so it reflects the head position of vehicles behind you, ensuring it doesn't affect your reversing view. The car's large screen may integrate more settings, such as the folding function for when you park. Keeping the mirrors clean is crucial; regular cleaning prevents blurred vision and reduces safety risks.

Was this review help?
17
Share
Expand All
Karen
12/31/2025, 01:57:47 AM

Adjusting the rearview mirrors of the Geely Boyue is key to enhancing driving safety. After settling into the driver's seat, use the lever on the door: first select the left or right indicator to choose the mirror, then adjust the mirror surface to ensure the view covers the edge of the vehicle body and the road behind, reducing side blind spots. It's recommended to have a small portion of the vehicle body visible in the mirror to help judge distance. Check the angle every few months, or readjust when someone else drives. The Boyue's heating button can be turned on during rainy days to defog and defrost, maintaining clear visibility. Proper rearview mirror settings can prevent rear-end collisions or impacts, especially prioritizing safety during nighttime driving.

Was this review help?
5
Share
Expand All
JaceRose
03/28/2026, 03:41:16 AM

When using the Geely Boyue at home, familiarizing yourself with the rearview mirror adjustment is essential. After sitting in the driver's seat, locate the small control panel on the left door armrest: use the selector button to choose the left or right mirror icon, then gently adjust the angle with the joystick to ensure a slight view of the side of the car and the rear window. When different family members take turns driving, readjust the mirrors each time to maintain proper alignment and minimize blind spots. When teaching family members how to operate it, emphasize the safety benefits, such as reducing the risk of lane-changing accidents. In winter, activate the heating function to defog the mirrors, ensuring clear visibility for safer driving—this small habit enhances overall safety in daily car use.

Was this review help?
7
Share
Expand All
More Q&A

Do Car Tires Have a Right and Wrong Side?

Car tires do have a right and wrong side, and it's best not to install them incorrectly. The differences between the right and wrong sides of the tire and the consequences of incorrect installation are as follows: Differences between the right and wrong sides of the tire: First, there is a difference in the tread pattern, known as asymmetric tread tires, where the left and right sides of the tire have different tread structures. Secondly, there is a difference in thickness—the outer side is thicker than the inner side, making it more impact-resistant and wear-resistant. Lastly, there are different markings on the inner and outer sides: the inner side is labeled INSIDE, while the outer side is labeled OUTSIDE. Consequences of incorrect tire installation: If installed incorrectly, it can cause uneven wear, reduced impact resistance, increased replacement frequency, insufficient grip leading to skidding, impaired drainage performance, and in severe cases, it can even lead to a blowout.
119
Share

What is the reason why the Honda CR-V does not display the remaining mileage?

Honda CR-V does not display the remaining mileage due to sensor and wiring damage. Sensor failure symptoms: The symptom of an odometer sensor failure is that the car's odometer needle does not move, the mileage does not increase, and the flexible shaft in the speedometer rotates at high speed, with its movement lagging and being limited by the alternating stress limit of the steel wire. Odometer sensor testing method: Disconnect the speed sensor connector, use a multimeter in resistance mode to check the resistance value between the two leads of the sensor, rotate the transmission output shaft, and use an automotive oscilloscope to detect the signal voltage waveform between the two leads of the speed sensor. If the waveform is an alternating current pattern, and the amplitude and frequency of the waveform increase with the speed of the output shaft, this indicates that the sensor is functioning properly.
114
Share

Why does the Volkswagen CC's cooling fan keep running after parking?

After the Volkswagen CC is parked and the engine is turned off, the cooling fan will continue to operate until the temperature of the antifreeze in the engine radiator drops below 85 degrees Celsius. This is the factory design standard of the Volkswagen CC and does not indicate a radiator malfunction. The function of the cooling fan: Under high-temperature working conditions, the car engine must be properly cooled to maintain an optimal operating temperature, ensuring good engine performance, durability, and exhaust emission standards. The cooling fan is primarily used for engine and coolant heat dissipation, preventing engine failure due to overheating. The principle of the cooling fan: The car fan consists of fan blades, a fan belt, and an electric motor. When the sensor detects that the engine coolant temperature reaches the operating threshold for the cooling fan, the fan motor starts rotating, driving the belt and enabling the fan to operate normally, dissipating heat from the engine and radiator. When the temperature drops below the operating threshold, the motor stops, and the fan ceases operation.
110
Share

Are the engines of Jetour X70 and Tiggo 8 the same?

In terms of the engine alone, the Tiggo 8 is equipped with the SQRE4T15B, while the Jetour X70 is equipped with the E4T15B. Both models currently feature the improved 1.5T engine, the SQRE4T15C, making their powertrains completely identical. Similar interior design: There is no fundamental difference between the Jetour X70, including its S and PLUS versions, and the Tiggo 8. The Tiggo 8 has slightly richer configurations and a bit stronger market influence. Points to note when purchasing: For both the Jetour X70 and Tiggo 8, only the manual transmission versions are recommended. Firstly, the larger mass of these two models makes the automatic transmission versions perform poorly in terms of power. Secondly, the dual-clutch transmission has a high failure rate.
101
Share

Is It Normal to Have Fog Inside the Headlights?

Fogging inside car headlights is a normal phenomenon. The causes and solutions for headlight fogging are as follows: Causes of Headlight Fogging: Headlight fogging occurs due to the structure of the headlights and air circulation, which is an unavoidable phenomenon. It tends to recur frequently, especially during periods with significant temperature differences, in winter, and in seasons with heavy rainfall. Solutions for Headlight Fogging: When encountering fog inside the headlights, the best solution is to turn on the headlights. Typically, after the headlights have been on for a while, the areas directly exposed to the light will dry quickly, causing the fog to disappear. However, the fog at the edges may take some time to evaporate, as the area directly exposed to the light is limited, and the temperature gradually rises from the center outward, resulting in slower evaporation of moisture at the edges of the headlight cover.
112
Share

What are the hidden features of the Audi C6?

Audi C6 hidden features include an audible beep when locking the car, Audible beep when locking the car: The sport pointers on the dashboard make a full circle when the engine starts, the auto start-stop function does not need to be manually turned off again, and it automatically saves the record of the last time the auto start-stop was turned off. Automatic double flashing warning lights when braking at high speed: The dimensions of the Audi A6L model are 5038 mm in length, 1886 mm in width, and 1475 mm in height, with a wheelbase of 3024 mm, a minimum ground clearance of 117 mm, a fuel tank capacity of 73 liters, and a trunk capacity of 430 liters. The vehicle is equipped with a 2.0T turbocharged engine, with a maximum power of 140 kW and a maximum torque of 320 Nm. It is paired with a 7-speed dual-clutch transmission, and both the front and rear suspensions are five-link independent suspensions.
106
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.