···
Log in / Register

how old to rent car enterprise

5Answers
LaJulia
12/19/2025

The minimum age to rent a car from Enterprise in the United States is 21 years old. However, drivers under the age of 25 will be charged a Young Renter Fee, which is typically an additional daily surcharge. While 21 is the official minimum, your options and costs can vary significantly based on your age, the rental location (airport vs. neighborhood branch), and the type of vehicle you want to rent.

The most significant factor is the Young Renter Fee. This fee is applied to all renters between 21 and 24 years old and is meant to cover the increased risk associated with less experienced drivers. The exact amount fluctuates by state and location but generally falls within a specific range. For some high-performance or luxury vehicles, the minimum age requirement can be 25 or even older.

Here is a breakdown of typical Enterprise age policies and surcharges:

Age GroupMinimum Age to Rent?Young Renter Fee (Daily Estimate)Vehicle Class Restrictions
Under 21NoNot ApplicableCannot rent a vehicle.
21-24Yes$20 - $30 per dayStandard sedans and SUVs are typically allowed; premium, luxury, or high-capacity vehicles may be prohibited.
25 and overYesNoneFull range of available vehicles is accessible, subject to standard rental qualifications.

Beyond age, remember that Enterprise requires a valid driver's license, a credit card (not a debit card) in the renter's name for the security hold, and proof of insurance or a willingness to purchase their coverage. Always call the specific rental location ahead of time to confirm their policies, as airport franchises may have stricter rules than local branches.

Was this review help?
8
3
Share
AlexanderDella
12/27/2025

Yeah, you gotta be at least 21. But if you're under 25, get ready for a "young driver fee" that gets tacked onto your daily rate. It's a pain, but it's pretty standard across all the big rental companies. My advice? Just budget for that extra cost upfront so you're not surprised at the counter. Also, forget about renting anything fancy like a sports car until you hit 25.

Was this review help?
6
2
Share
Expand All
DePaislee
01/03/2026

The primary requirement is 21 years of age. Enterprise implements a structured policy to manage risk, which includes a daily surcharge for drivers aged 21 to 24. This Young Renter Fee is non-negotiable. Furthermore, vehicle choice is often restricted for this age group, excluding premium categories. The most reliable course of action is to verify all details directly with your chosen rental branch before making a reservation, as local regulations can cause policy variations.

Was this review help?
2
3
Share
Expand All
VanMolly
01/11/2026

I remember trying to rent a car for a college road trip and running into this. The magic number is 21. The real catch is the extra fee they charge drivers under 25. It feels like a penalty, but it's just their policy. We found it was cheaper to have a friend who was over 25 be the primary driver on the rental agreement. It’s definitely something to plan for, as it can add a hundred dollars or more to your total cost for a week-long rental.

Was this review help?
1
5
Share
Expand All
MacPaul
01/18/2026

Enterprise's policy aligns with most major rental agencies, setting the minimum age at 21. The key takeaway for younger drivers is the mandatory Young Renter Fee, which is a daily surcharge for those aged 21-24. This can significantly impact your total budget. Your choice of vehicle will also be limited; you'll likely be restricted to economy or compact cars. Always have a major credit card ready, as debit cards often come with additional requirements or may not be accepted for younger renters.

Was this review help?
7
4
Share
Expand All
More Q&A

How to Check the Date of Headlights on a Used Car?

To read the production date of the headlights on a used car, you can check the stamp on the headlights, which is usually located at the bottom left or bottom right corner of the headlight. Below are specific details about replacing headlights: 1. Choosing Headlights: When selecting new headlights, you should choose the appropriate bulb model based on your car, while also considering factors such as annual inspections and whether the battery can handle it. It is best to opt for original equipment manufacturer (OEM) headlights. 2. Installation and Removal: Avoid touching the glass shell of the bulb directly with your hands during installation or removal. When installing the bulb, do not touch the glass part with your fingers, as even the slightest oil residue on the glass can shorten the bulb's lifespan and pose a risk of cracking with prolonged use. 3. Light Intensity: When replacing the bulb, compare the light intensity and adjust it properly in time, as adjusting it later can be time-consuming and labor-intensive.
8
3
Share

How to Adjust When the Car Body is Not Straight During Curb Parking?

Practice makes perfect. Here are the adjustment methods for an unaligned car body during curb parking: Use the wiper to judge whether the car front is straight—no problem. By comparing the wiper with road markings, maintain a fixed distance or angle while driving. If it deviates, it indicates the car front is not straight. Additionally, depending on each person's height difference, other parts of the car front can also serve as reference points, such as the roof corner or reinforcement ribs. Actually, the most crucial point to ensure the car front is straight is to learn to look into the distance, observing distant traffic lights, the rear of the car ahead, lane markings, etc., to see if the car body is straight. When parking at the curb, after selecting the parking position, turn the steering wheel to the right. At this time, the steering angle should not be too large. When the center of the car front is about to align with the right edge line, immediately turn the steering wheel back to the left. The steering wheel turning range can be slightly larger at this point.
10
5
Share

What does a yellow light with an 'a' inside a circle on the dashboard mean?

The reason for a yellow light with an 'a' inside a circle appearing on the dashboard is that the engine auto start-stop system is active. At this time, the car often shuts off, and releasing the brake will automatically restart the engine, allowing normal driving to resume. The conditions for auto start-stop activation include: engine coolant temperature being too low after a cold start, typically below 70 degrees Celsius; outside temperature below 5 degrees Celsius, or cabin temperature below 20 degrees Celsius when heating is on; insufficient battery charge, usually below 60%; steering wheel angle exceeding 30 degrees; front seat belts not fastened; and parking on a slope. The auto start-stop function activates automatically each time the car is started, provided the above conditions are met, and the vehicle speed exceeds 3 km/h for about 4 seconds, without requiring any additional action from the driver. However, the auto start-stop function must be turned off in the following situations: during water wading; when driving on a slope (most cars are usually set to automatically disable it in this case); and when refueling, the engine must be completely turned off and power must be cut before refueling.
16
1
Share

What is the working principle of an evaporator?

The working principle of an automobile evaporator: The liquid refrigerant enters through the feed port, while the heating steam heats the heating tube bundle inside the heating chamber. The thicker tube in the middle of the heating chamber, due to its smaller heating area compared to the heating tube bundle, causes the refrigerant vaporized by the heating tube bundle to rise and enter the evaporation chamber. Below are related introductions: 1. Definition of the evaporator: The evaporator is a device used to heat the refrigerant and absorb heat from the external environment, mainly composed of a heating chamber and an evaporation chamber. 2. Application in thermal units: In fresh air heat exchange units and fan coil units, the evaporator primarily provides chilled water during the cooling process and heated refrigerant during the heating process. 3. Application in ground source heat pump systems: Its role in ground source heat pump systems is opposite to that of the condenser. During the heating process of the ground source heat pump unit, the evaporator acts as a ground source side device, heating the circulating water on the ground source side. The heated water is then transferred to the condenser through heat exchange in the unit, where the heat from the hot water is discharged by the condenser.
18
5
Share

What do 4L and 4H mean in 4WD vehicles?

4H and 4L are two modes available in four-wheel-drive vehicles. 4H stands for four-wheel-drive high-speed mode, while 4L stands for four-wheel-drive low-speed mode. These two drive modes have certain differences in controlling the transmission and are used in different scenarios. Properly utilizing the four-wheel-drive modes according to terrain can not only improve the vehicle's off-road capability but also reduce fuel consumption to some extent. Usage scenarios for 4H and 4L modes: 1. Slippery surfaces: If driving on snow or slippery roads, the 4H mode is very suitable, as it ensures sufficient drive wheels while avoiding excessive driving force that could cause wheel slip. 2. Climbing: Due to its strong driving force, the 4L mode can be used when climbing slopes or during off-road driving, maximizing the vehicle's power. 3. High-speed driving: High-speed four-wheel drive is not suitable for highway driving. For part-time four-wheel-drive vehicles, dry paved roads are not suitable for 4H or 4L modes; only the 2H mode should be selected.
11
3
Share

What documents are needed for car transfer?

The seller needs to prepare the original ID card of the vehicle owner, vehicle registration certificate, vehicle license, original purchase invoice or transfer invoice of the vehicle, and the buyer needs to provide the original ID card of the buyer. Some regions also require a "vehicle purchase quota". The procedures for car transfer are as follows: 1. Obtain the form: obtain and fill out a copy of the motor vehicle change, transfer, modification, suspension, or scrapping approval form. 2. Stamp: affix the same seal as the original registration, and private vehicles must submit the owner's ID card for verification. 3. Review: go to the vehicle management section of the traffic police detachment and submit the documents to the registration acceptance counter for review by the handling officer. 4. Inspection: vehicles that meet the transfer conditions will be sent to the motor vehicle inspection counter for inspection and confirmation. 5. Payment: after passing the inspection, for transfers or changes within the same county or city, go directly to the license plate management counter to wait for notification and pay the fee. 6. Tax payment: the transaction tax is issued by the used car trading center and is charged at 1.48% of the vehicle's estimated value.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.