How often should the spark plugs of a Tiida be replaced?

What's the reason for the transmission not shifting up?

The reasons why the transmission cannot shift up: improper adjustment of the throttle cable or throttle position sensor, governor failure, oil leakage in the governor oil circuit, vehicle speed sensor failure, 2nd gear brake or high gear clutch failure, stuck shift valve or gear switch failure. The following is a brief introduction to the transmission: 1. Classification of transmissions: Transmissions are divided into manual transmissions and automatic transmissions. Manual transmissions consist of gears and shafts, while automatic transmissions consist of hydraulic torque converters, planetary gears, etc. 2. Development and reform of transmissions: With the continuous development of the automotive industry, transmissions have evolved from manual transmissions in the past to automatic transmissions today. The transmission allows the car to reverse while maintaining the same engine rotation direction, and shifting into neutral can interrupt power to start the engine and change gears. Owners using automatic transmissions can easily complete driving, and manual transmissions are less prone to failure compared to automatic transmissions.

108

Share

How many minutes are required to complete reverse parking?

The test time for reverse parking is 4 minutes, but it is recommended to complete it within 2 minutes to avoid the vehicle speed being judged by the computer as stopping midway. Reverse parking is an assessment point in the driver's test. It involves maneuvering the vehicle to correctly reverse into the garage from both sides, testing the driver's ability to operate the car in a confined space. Special reminders for reverse parking: Do not stick your head out of the car window while reversing into the garage. If the infrared line is touched, it will result in a failing grade; The current field test is very strict about using turn signals. Missing one signal will deduct 10 points, and missing two will result in disqualification; When taking a right-angle turn, be aware that there is a wheelbase difference between the front and rear wheels. When turning the steering wheel, leave space in advance for the rear wheels; Before preparing to enter the garage, you can pause briefly to observe the garage boundary line through the rearview mirror and determine the steering wheel angle for reversing. The car body should maintain a distance of 1.5 to 1.8 meters from the boundary line. When the front of the car crosses the infrared line, start reversing slowly. Align the vertical lining of the right triangular window of the rear door with the upper right corner of the yellow boundary line, turn the steering wheel fully, and you can reverse into the garage.

104

Share

What are the reasons for the electromagnetic clutch not engaging?

The reason the electromagnetic clutch does not engage is that when the refrigerant charge in the air conditioning system is excessive, it reduces the flow performance of the refrigerant in the system, causing abnormal compressor operation, poor cooling, unstable engine idle speed, and ultimately leading to the electromagnetic clutch not engaging. Here is additional information: 1. The electromagnetic clutch, also known as an electromagnetic coupling, utilizes the principle of electromagnetic induction and the friction between inner and outer friction plates. It is an electromagnetic mechanical connector that allows two rotating components in a mechanical transmission system to engage or disengage while the driving component continues to rotate. It is an automatically operated electrical device. 2. The function of the electromagnetic clutch is to transmit torque (or power) from the driving shaft to the driven shaft. It is widely used in various mechanisms (such as transmission systems in machine tools and various electric mechanisms) to achieve rapid starting, braking, forward/reverse rotation, or speed adjustment functions.

103

Share

What Are the Common Knowledge Points About Using Summer Tires?

There are 3 key points regarding the use of summer tires: 1. Regular maintenance of tire pressure: Tires with damage or weak spots are prone to blowouts or rapid wear due to excessive pressure. Affected by temperature, the gas inside tires automatically expands, causing tire pressure to rise from 2.3 kg to over 3 kg. To maintain proper tire pressure, it is recommended to fill tires with nitrogen in summer, reducing the filling pressure by about 10%; 2. Be cautious to prevent overuse: During prolonged high-speed driving in summer, it's advisable to cool the tires in a shaded area after a certain distance. When driving during the scorching midday heat, appropriately reduce speed. Pay attention to the tire's load capacity and avoid overloading. This helps maintain normal tire pressure and prevents overuse; 3. Prevent blowouts: Severe tire wear leads to excessively thin tire bodies, causing continuous internal heating, making them easily punctured by objects. Combined with the extreme summer heat, this significantly increases the risk of blowouts. Insufficient tire pressure can also cause the sidewalls to bend and break, leading to blowouts.

109

Share

Does crossing the stop line during a yellow light count as running a red light?

According to Article 26 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China", when the yellow light is flashing at an intersection, vehicles that have already crossed the stop line may continue to proceed. If the yellow light is already on and you continue to force your way through, being caught in such a situation will also be considered as running a red light. According to the relevant provisions of Article 88 of the "Road Traffic Safety Law of the People's Republic of China", motor vehicle drivers who violate traffic signal lights at intersections will be penalized with 6 demerit points. Additionally, according to the relevant provisions of Article 90 of the "Road Traffic Safety Law", a fine may also be imposed. Criteria for determining running a red light: Electronic eyes capture three photos as the basis for determining a red light violation: the front wheels crossing the stop line, the rear wheels crossing the stop line, and the front wheels crossing the opposite stop line. Only when all three photos are present will it be considered as running a red light. According to Article 11 of the "Measures for the Management of Demerit Points for Road Traffic Safety Violations", if you cross the stop line when the red light is on but manage to stop the vehicle even if you have already crossed the line, it will not be considered as running a red light. However, it will be regarded as stopping beyond the line, and according to traffic laws, it is classified as failing to drive or stop as required at intersections, resulting in a penalty of 2 demerit points. How to avoid running a red light while driving: When there are arrow signal lights, follow the arrow lights; otherwise, follow the circular lights; When the red light is on, the front of the vehicle must not cross the stop line; When the yellow light is on, the front of the vehicle must not cross the stop line; When the green light just flashes, if you are close and moving fast, you should proceed, as stopping might be difficult and could result in crossing the stop line; if you are far away, moving slowly, or the intersection is congested, you should stop; When driving in the city, develop the habit of looking for traffic lights whenever you see a crosswalk or stop line at an intersection.

118

Share

What Size Tire Fits a 20-Inch Wheel?

A 20-inch wheel rim should use R20 tires. Tires are the only components of a car that come into contact with the ground, and they are crucial for driving stability and safety. Tires are made of rubber, which can age over time with prolonged use, so they need to be replaced regularly. If not replaced for a long time, it can affect the car's driving stability and safety. Under normal circumstances, tires installed on a car can last for four years, so it is recommended to replace them every four years. When purchasing new tires, be sure to check the production date, as tires also have a shelf life. Normally, the shelf life of tires that are not installed on a car is three years. If the tires have been in storage for more than three years, they should not be purchased. After installing new tires, it is essential to perform a dynamic balance test on each wheel to prevent abnormal vibrations at high speeds. If abnormal vibrations occur during high-speed driving, it can compromise the car's stability and safety. During regular use, it is also important to frequently check the tire pressure. Tire pressure is critical for tires. The pressure should not be too high or too low. If the pressure is too high, it reduces the contact area between the tire and the ground. If the pressure is too low, it can cause wave-like deformations in the tire during high-speed driving. In addition to the model, tires are marked with the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord tires. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters from A to Z represent certified speed ratings ranging from 4.8 km/h to 300 km/h. Common speed ratings include: Q: 160 km/h; H: 210 km/h; V: 240 km/h; W: 270 km/h; Y: 300 km/h. Rim specification: Indicates the rim size compatible with the tire for practical use, such as standard rim 5.00.

108

Share