···
Log in / Register

How often should a new car undergo annual inspection and review?

6Answers
DiGrant
07/23/2025, 08:19:12 AM

New cars require annual inspection in the sixth year. Below is more information about vehicle annual inspection: Specific inspection content: Check whether the engine, chassis, body, and their attachments are clean, complete, and effective; whether the paint surface is uniform and aesthetically pleasing; whether major assemblies have been replaced and match the initial inspection records; verify if the vehicle's braking performance, steering control, lighting, exhaust, and other safety features comply with the technical requirements for safe operation of motor vehicles; inspect whether the vehicle has undergone modifications, alterations, or transformations, and whether the driving license, license plate, and vehicle registration records match the current condition of the vehicle, including any changes, and whether approval and modification procedures have been completed; check for any damage, alterations, or unclear markings on the license plate, driving license, or enlarged license plate markings on the vehicle, and determine if replacement is needed. Notes for vehicle annual inspection: Vehicles should undergo annual inspection within three months before the expiration of the motor vehicle inspection validity period. According to relevant laws, the owner of the motor vehicle must resolve all related traffic violations and accidents before applying for the annual inspection through the legal process.

Was this review help?
107
Share
MatthewFitz
08/10/2025, 06:19:24 AM

When I first bought my new car, I specifically checked the regulations. For the first two years, the new car doesn’t require an on-site inspection at all. You just need to apply for an inspection sticker every two years through the traffic management APP or official account, which is simple, quick, and hassle-free. The same applies for the third and fourth years—just keep applying online. However, by the sixth year, you’ll need to visit the DMV or an inspection station for an annual on-site inspection, checking safety items like lights and brakes to ensure there are no hidden issues. After ten years, it becomes an annual requirement. As for the registration review, new cars also need to update their registration information every two years, including insurance and taxes, but it’s much easier compared to inspections. These rules are quite friendly for private passenger cars, avoiding frequent trips—just don’t miss the mobile reminders. I recommend new car owners develop a habit of checking notifications regularly to avoid last-minute chaos.

Was this review help?
20
Share
Expand All
ArianaFitz
09/21/2025, 11:51:05 PM

After driving for so many years, I've concluded that the first few years are the easiest for new car annual inspections. For the first two years after a new car is registered, it's exempt from on-site testing—just collect the electronic label to complete the annual review without queuing for tests. This pattern continues for the third and fourth years, but starting from the fifth year, you'll need to prepare for on-site testing. The sixth year marks the first on-site inspection, which is a critical point—pay attention to emission and safety data to avoid being misled. The annual review is usually handled simultaneously, requiring only an update of document information. In practice, well-maintained new cars pass inspections more easily. Here's a tip: check local details in car owner communities beforehand, as minor regional differences like environmental requirements may vary, preventing unnecessary delays in your schedule.

Was this review help?
19
Share
Expand All
NolanDella
11/05/2025, 02:10:32 AM

Ensuring the safe operation of your vehicle, annual inspection is a mandatory rule. For new cars, within the first four years from the date of registration, there is no burden of online inspection, and you can simply complete the formalities to obtain the inspection label every two years. Starting from the fifth and sixth years, online inspection is required, covering emission standards and safety systems such as braking devices. It is recommended that car owners regularly self-check lights and tires to reduce inspection risks. Considering environmental protection, new cars with low emissions can save some costs, but inspections will become more frequent over time. Overall, this system contributes to the stable operation of road traffic and is worth taking seriously.

Was this review help?
17
Share
Expand All
TaliaMarie
12/26/2025, 03:58:18 AM

Living in a big city with its fast pace, the long queues for annual vehicle inspections often give me a headache. However, the new car policy is quite considerate. For the first six years, the process is simplified: from the first to the fourth year, you just need to collect the inspection sticker as a substitute for the actual inspection. There's a minor adjustment in the fifth year, and the first on-site inspection is only required in the sixth year. The annual review can be conveniently handled alongside insurance renewal using online platforms. In practice, the lower frequency of inspections for new cars saves time and effort, but it's important to avoid peak seasons when making appointments. Talking about urban impacts: towing the car to the inspection station during congested hours is the most troublesome. Take advantage of the new car benefits period to plan ahead, ensuring it doesn’t affect the convenience of your daily commute.

Was this review help?
17
Share
Expand All
DelNicole
03/23/2026, 11:33:44 PM

When I first owned a car, I was completely confused about the annual inspection rules. Later, I figured it out: new cars are exempt from inspection in the first year after purchase, and you only need to apply for the annual inspection sticker online in the second year. This method continues for the third and fourth years, and it’s not until the sixth year that an on-site inspection is required, where the engine and safety components are checked. The annual inspection involves registration updates, which are synchronized every two years. Sharing some rookie mistakes: don’t just rely on friends’ advice—checking the official website policies yourself is the most reliable. For example, annual inspections for cars purchased out of town are slightly more complicated. During the new car period, it’s best to find a reputable shop to handle the formalities to save effort and avoid fines for non-compliance.

Was this review help?
14
Share
Expand All
More Q&A

What causes the P0304 misfire detected in cylinder 4?

P0304 primarily indicates a misfire detection in cylinder 4. The main causes of this phenomenon include no ignition in cylinder 4, no fuel injection in cylinder 4, or insufficient cylinder pressure in cylinder 4, etc. The first step is to inspect the intake and exhaust systems, ignition system, and fuel supply system. Identifying the faulty component and replacing it will resolve the issue. Below is an introduction to automotive fault codes: 1. Introduction one: Automotive fault codes are codes reflected by the vehicle's computer ECU after analyzing a fault issue. Most fault codes are caused by sensor malfunctions or poor sensor performance, but some mechanical faults cannot be read by the ECU. 5. Introduction two: When there is an issue with the car engine, the diagnostic computer will display fault codes after inspection. Using these codes, repair personnel can accurately locate the faulty component and proceed with repairs. 3. Introduction three: Automotive fault codes can be divided into two types: intermittent faults and actual faults.
103
Share

Why can't the Haval H2 start?

Possible reasons why the Haval H2 with one-button start cannot start are as follows: the gear was not returned to P when parking, the steering wheel is in a locked position, the smart key is out of battery or not within the remote sensing range, the battery is dead, it's cold and no antifreeze was added, or there is no fuel, which can also prevent the car from starting. Below is additional information about the Haval H2: 1. Design: As an additional model, the new car still adopts the design of the current model, continuing to use the hexagonal family-style grille, which is overall fashionable and sporty. The new car is equipped with a wealth of safety features, including ESP, TCS traction control, HHC hill assist, MI rollover prevention system, HDC hill descent control, and more. 2. Powertrain: In terms of power, the new car has upgraded its powertrain system, equipped with a GW4G15F 1.5T turbocharged engine, with a maximum power of 110kW (150PS) and a peak torque of 210Nm. The transmission is matched with a 6-speed manual or 7-speed dual-clutch gearbox, and the entire series meets the National 6 emission standard.
107
Share

What is the fuel consumption of the Geely Xingyue L?

The 1.5T engine version of the Xingyue has a fuel consumption of approximately 8.8 liters per 100 kilometers, while the 2.0T engine version consumes about 9.6 liters per 100 kilometers. Here are the relevant details: 1. 1.5-liter turbocharged engine: The Xingyue is a compact sport SUV under Geely, equipped with two engines: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. The 1.5-liter turbocharged engine, codenamed JLH-3G15TD, is a three-cylinder engine with a maximum power of 130 kW and a maximum torque of 255 Nm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a 7-speed dual-clutch transmission. 2. 2.0-liter turbocharged engine: The 2.0-liter turbocharged engine, codenamed JLH-4G20TDB, delivers a maximum power of 175 kW and a maximum torque of 350 Nm. It also features direct fuel injection technology and an aluminum alloy cylinder head and block. This engine is paired with an 8-speed automatic transmission.
103
Share

Where is the central locking control box located in the Besturn B70?

The central locking control box of the Besturn B70 is located under the handbrake. Controller: The controller consists of two parts: one is the power window control circuit, and the other is the central locking control circuit. These two circuits are independent of each other and do not interfere with one another. Procedure for removing the car window regulator switch: Turn off the ignition switch and all electrical appliances, and remove the ignition key from the 0 (pre-lock position) position. Use the pry bar set -NST1055– to unlock the locking lug -arrow- on the front side of the handle cover -1- and pull it out along the -arrow- direction from the door trim. Disconnect the plug connections -1- and -2-, and remove the handle cover. Unlock the locking lug -arrow- and remove the button module -1- from the handle cover.
119
Share

How to Solve the Triangle Exclamation Mark in the Reversing Camera?

The appearance of a yellow exclamation mark is due to the absence of a reversing camera signal, so you can check the reversing camera and its wiring. Here are some related introductions about the reversing camera: 1. Solution to the triangle exclamation mark in the reversing camera: The appearance of a yellow exclamation mark is due to the absence of a reversing camera signal, so you can check the reversing camera and its wiring. 2. The role of the reversing camera: The system makes the situation behind the car more intuitive and clear when reversing, which is one of the very practical configurations for reversing safety. When the reverse gear is engaged, the system will automatically activate the high-definition reversing camera located at the rear of the car, clearly displaying the situation behind the car on the reversing LCD screen, accurately grasping the road conditions behind, making reversing as easy and confident as moving forward.
104
Share

What is the difference between GL4 and GL5 gear oil?

The differences between GL4 and GL5 gear oil are as follows: 1. GL-5 grade gear oil contains more sulfur compared to GL-4 grade oil. 2. GL-4 grade is a medium-duty gear oil, suitable for differential gears, transmission gears, and steering gears. 3. GL-5 is a heavy-duty gear oil, suitable for differential gears and rear axle gears operating under extremely harsh conditions. Here is more information about gear oil: 1. Gear oil mainly refers to the lubricating oil used in transmissions and rear axles. It differs from engine oil in terms of usage conditions, composition, and performance. 2. Gear oil primarily functions to lubricate gears and bearings, prevent wear and rust, and assist in heat dissipation for gears. 3. Automotive gear oil is used in gear transmission mechanisms such as steering systems, transmissions, and drive axles. Due to the high surface pressure during gear transmission, gear oil plays a crucial role in lubrication, anti-wear, cooling, heat dissipation, anti-corrosion, rust prevention, cleaning, and reducing gear surface impact and noise.
102
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.