···
Log in / Register

How many points are deducted for stopping less than 50 centimeters from the designated point?

6Answers
VanSarah
07/29/2025, 09:28:53 PM

Stopping less than 50CM will deduct 10 points, while stopping more than 50 centimeters will deduct 100 points. More extended information is as follows: Overview: Both the slope fixed-point parking in Subject 2 and the roadside parking in Subject 3 require aligning the vehicle within 30 centimeters. If the vehicle is parked more than 50 centimeters from the edge, it will result in an immediate failure. Parking less than 30 centimeters without touching the line will not incur any point deductions. The situations where the vehicle is parked less than 30 centimeters or more than 50 centimeters from the edge are due to inaccurate reference points. Others: Since different people have varying heights and sitting postures, you can judge the vehicle's position accordingly. If all conditions are met, it generally indicates the vehicle is within 30cm of the edge line. At this point, you can press the brake to stop, shift to neutral, and pull up the handbrake. Finally, turn off all light switches and the engine. It's important to note that before opening the car door, you should turn your head to check the left road conditions and the left rearview mirror, then open the door slightly to confirm safety again before exiting the vehicle.

Was this review help?
115
Share
AnthonyFitz
08/15/2025, 03:10:24 AM

When I was getting my driver's license, the instructor repeatedly emphasized this detail. In the hill-start and stop test of Subject 2, if the vehicle body is more than 30 cm but less than 50 cm from the road edge line, you'll directly lose 10 points. Exceeding 50 cm means an automatic failure. As for the bumper position, a deviation of more than 30 cm front or back also deducts 10 points. The instructor even suggested that stopping with the bumper right on the marker pole line is safest, as it utilizes the 30 cm buffer zone in both directions. I remember during my first test, due to nervousness, I rolled 5 cm extra - fortunately still within the 30 cm limit, only costing me points. Thinking back, it was really close.

Was this review help?
1
Share
Expand All
VanAngela
10/20/2025, 03:20:52 AM

Last week, I accompanied a friend to a mock driving test and specifically asked the examiner about the grading criteria. The key to the designated parking test lies in controlling two distances: keeping the right side of the car within 30 cm from the roadside white line for full marks, between 30-50 cm deducts 10 points, and exceeding 50 cm results in immediate failure. As for the front/rear distance, no points are deducted if the front bumper stays within 30 cm before/after the pole marker line, but exceeding this range costs 10 points. My friend often practiced by aligning the wiper's raised point with the roadside line, which proved quite accurate. Many candidates lose points on this item during actual tests, so it's advisable to bring a tape measure for on-site measurements during practice sessions.

Was this review help?
14
Share
Expand All
BarrettLynn
12/03/2025, 02:52:21 AM

Obtained a C2 automatic transmission license in Nanjing. The requirement for the distance between the car body and the edge line is within 30 cm to pass, 30 to 50 cm results in a 10-point deduction, and exceeding 50 cm leads to immediate test termination. As long as the bumper does not exceed the 30 cm range of the pole line, no points will be deducted. The test center safety officer informed me that the most common mistake is slowing down too early when going uphill, causing misalignment. The correct approach is to maintain a steady speed and align with the reference point. Remember to bring coins to practice throttle control under your foot, as neglecting this detail can easily lead to exceeding the distance.

Was this review help?
2
Share
Expand All
DeBella
01/23/2026, 09:26:02 PM

After teaching the subject two (parking) for seven years, it's been found that students fear the parallel parking the most. Deduction points mainly focus on two positions: a full score is given if the distance between the car body and the roadside line is within 30cm, and 10 points are deducted if it's between 30-50cm; no points are deducted if the bumper is within ±30cm of the pole line. The key technique is to adjust the seat to a fixed position and align the raised point on the wiper of the engine hood with the roadside line. Last week, a student used a water bottle as a reference for practice, but almost misjudged during the exam due to different colors of the marking lines in the test area. Therefore, it's recommended to familiarize oneself with the color of the ground marking lines in the test area in advance.

Was this review help?
5
Share
Expand All
RebeccaRose
04/19/2026, 03:37:47 AM

I just reviewed this question yesterday while using the driving test app. On the slope parking test, you'll lose 10 points if the vehicle body is over 30cm but within 50cm from the edge line, and another 10 points if the bumper is within 30cm outside the pole line. Actually, the vehicle position matters more - exceeding 50cm means instant failure. My friend tried using the lower edge of the left mirror to align with ground markings during his test, but due to height differences, he ended up 48cm over the line and barely passed after point deduction. My personal suggestion: before the test, mark a reference point on your car using your shoe size (size 38 shoe is about 24cm long) to help estimate distances.

Was this review help?
20
Share
Expand All
More Q&A

What is the validity period of a driver's license?

Driver's license validity periods are divided into six years, ten years, and permanent. Regulations for the 6-year validity period of a driver's license: If the motor vehicle driver has not accumulated 12 points in any scoring cycle during the 6-year validity period of the driver's license, they can renew it for a 10-year validity period. Regulations for the 10-year validity period of a driver's license: If the motor vehicle driver has not accumulated 12 points in any scoring cycle during the 10-year validity period of the driver's license, they can renew it for a permanent driver's license. Regulations for driver's license renewal time: Motor vehicle drivers should apply for renewal at the vehicle management office where the driver's license was issued within 90 days before the expiration of the driver's license.
108
Share

What to Do When the Car Air Conditioning Compressor Fails to Start?

If the car air conditioning compressor fails to start, check whether the power supply is properly connected, whether the plug is securely connected, whether there is any loose connection, and whether the AC switch on the air conditioning control panel is functioning normally. If all the above are normal, the compressor may be faulty, and professional personnel should be contacted for inspection promptly. The car air conditioning compressor is the heart of the car air conditioning refrigeration system, responsible for compressing and transporting refrigerant vapor. Compressors can be divided into fixed displacement and variable displacement types, and according to different working principles, they can be categorized into fixed displacement compressors and variable displacement compressors. Based on different working methods, compressors can generally be classified into reciprocating and rotary types.
113
Share

What are the causes of abnormal noise during car idling?

Reasons for abnormal noise during car idling: 1. Abnormal noise caused by excessive clearance, which refers to the abnormal noise caused by the wear of a certain part of the engine that makes the clearance too large; 2. Abnormal noise due to engine misfire, mainly refers to one or more cylinders of the engine not working properly; 3. Abnormal noise of engine knocking refers to the sound of knocking when the car starts. Piston knocking noise refers to the abnormal noise caused by the piston swinging or moving up and down in the cylinder, and its head or skirt colliding with the cylinder wall or cylinder head. Idling is a working condition of the car, which means that the engine is running in neutral gear, and the speed of the engine during idling is called the idling speed.
120
Share

Where is the water drain valve of the Nissan Sylphy?

The water drain valve of the Nissan Sylphy is located at the bottom of the radiator, where there is a drain plug that can be opened to release the water. The car radiator generally refers to the cooling system's radiator, which in the engine's water cooling system consists of three parts: the inlet chamber, outlet chamber, main plate, and radiator core. The Nissan Sylphy is a compact car under Dongfeng Nissan, with body dimensions of 4631mm in length, 1760mm in width, and 1503mm in height, and a wheelbase of 2700mm. The car's instrument panel features a traditional dual-dial design, with a black background and white numerals for the tachometer and speedometer, making them clear and easy to read. Additionally, there is a color display screen in the center that can show a variety of driving information.
112
Share

What is the repair method for the fault code p2015 in the Tiguan?

The repair method for the fault code p2015 in the Tiguan is: replace the intake manifold assembly, and then use a computer to clear the fault code. The car fault code is the fault code reflected by the car computer ECU after the car fails, which is divided into real code, historical code and occasional code. The real code is the real fault, the historical code is the fault code left over from the past that has not been cleared, and the occasional code is the random fault code. The Tiguan is a compact SUV under Volkswagen, with a car size of 4506mm in length, 1809mm in width, 1685mm in height, and a wheelbase of 2684mm.
103
Share

What are the causes of the Crown VSC system malfunction?

The main causes of the Crown VSC system malfunction include: faults in the vehicle's anti-skid and traction control systems. When the warning light comes on, it is usually due to improper operation by the driver or abnormal road conditions triggering the warning light. The VSC system is a vehicle stability control system, an active safety system developed by Toyota Motor Corporation. The Crown is a mid-to-large-sized car under the Toyota Group, with body dimensions of 5020mm in length, 1805mm in width, and 1480mm in height. The body structure is a 4-door, 5-seater sedan, equipped with three types of engines: 2.5L, 3.0L, and 4.3L.
111
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.