···
Log in / Register

What are the test items for C2 Subject 3?

6Answers
MackenzieAnn
07/23/2025, 08:48:30 AM

According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses", there are 15 test items for C2 Subject 3. These include preparation before getting on the vehicle, starting, driving straight, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and driving at night. Driving license C2 Subject 3 test content: Preparation before getting on the vehicle: Failing to walk around the vehicle to inspect its appearance and safety conditions results in disqualification. Failing to observe the traffic conditions behind before opening the door results in disqualification. Starting: Starting with insufficient brake pressure results in disqualification. Starting with the door not fully closed results in disqualification. Before starting, failing to observe the traffic conditions on the left and behind through the rearview mirror and turning the head to the left results in disqualification. Changing lanes: Before changing lanes, failing to observe the road traffic conditions behind through the interior and exterior rearview mirrors results in disqualification. When changing lanes, making an unreasonable judgment of the vehicle's safe distance and hindering the normal driving of other vehicles results in disqualification. Continuously changing more than two lanes results in disqualification. Passing intersections: Failing to slow down before passing an intersection results in disqualification. Going straight through an intersection without observing the traffic conditions on the left and right results in disqualification. When turning at an intersection, failing to observe the traffic conditions ahead or failing to observe the traffic conditions on the side and behind through the interior and exterior rearview mirrors results in disqualification. Entering an intersection when there is a traffic jam and stopping the vehicle inside the intersection to wait results in disqualification. Failing to yield to pedestrians and vehicles with the right of way as required results in disqualification. Driving license C2 Subject 3 test tips: During the walk-around, pay attention to the tire conditions and whether there are obstacles in front of or behind the vehicle. Adjust the seat and fasten the seatbelt while the examiner checks the ID. Master the fixed steps and sequence for starting; a smooth start is crucial. Do not skip gears when shifting up until the highest gear is reached, but control the speed to avoid going too fast. When shifting gears, hold the steering wheel tightly with the left hand to prevent deviation, and keep looking at the left and right rearview mirrors to monitor the road conditions.

Was this review help?
108
Share
LeRafael
08/10/2025, 06:43:00 AM

I just passed my C2 Subject 3 driving test and I'm thrilled! That exam is the actual road driving test, where the examiner sits in the passenger seat monitoring your every move. Key components include pre-start vehicle and instrument checks to ensure the handbrake is engaged and lights are functioning. When starting, accelerate smoothly—no aggressive driving. Then comes straight-line driving, maintaining speed within limits without exceeding. Lane changing is mandatory: signal first, check mirrors for safety, then change lanes. Approach intersections by slowing down, obeying traffic signals, and being extra cautious with oncoming traffic during left/right turns. Pulling over is crucial—select a safe spot, signal, align without crossing lines, and stop steadily. Night tests include light usage evaluations like high/low beam switching. Examiners scrutinize details—forgetting turn signals deducts points, running red lights means instant failure. After extensive practice, I passed—this test cultivates safe driving habits beyond just skills. Passing means you're road-ready—what an achievement!

Was this review help?
7
Share
Expand All
LeMaggie
09/22/2025, 12:22:06 AM

As someone who frequently accompanies trainees for the Category 3 driving test, I have a deep understanding of the exam's components. The starting procedure requires checking the rearview mirrors and dashboard lights, followed by a smooth departure. Next, during straight-line driving, maintain speed below 30 km/h to avoid penalties. When changing lanes, always use the turn signal and wait 3 seconds before steering. Approach intersections by slowing down and carefully observing pedestrians and vehicles, especially avoiding solid lines when turning. The most critical part is parallel parking - select a legal parking zone, activate the right turn signal, and slowly position the vehicle within 30 cm. The test also includes simulated scenarios like the lighting test, which requires precise operation of vehicle lights. Common mistakes include neglecting blind spot checks or forgetting turn signals, which compromise road safety. I consistently emphasize practicing parking and turns while familiarizing with local road conditions to improve first-time pass rates. Using timers during preparation helps manage time allocation for each segment and reduces nervous errors.

Was this review help?
19
Share
Expand All
DiBraxton
11/05/2025, 02:41:55 AM

When I was younger, I took the manual transmission driving test, and now I recall that the C2 Category 3 test is similar to an actual driving assessment. The main tasks include checking the tires and lights before starting, and ensuring a smooth start without stalling. During the drive, the test evaluates the ability to maintain a straight line without veering off. Changing lanes requires using turn signals and proper observation. When approaching intersections, it's essential to slow down and pay attention to traffic signals. For the roadside parking, you need to find a suitable spot and stop smoothly in one attempt. The test also emphasizes nighttime lighting operations, such as switching between high and low beams. These elements are designed to ensure you remain calm and composed on the road. During my test, I lost points for forgetting to use the turn signal, so practicing simulations beforehand to build muscle memory is crucial. Passing the test means the freedom to drive without relying on public transport, which is a great convenience.

Was this review help?
19
Share
Expand All
RobertFitz
12/26/2025, 04:29:28 AM

After decades of driving, looking back at the C2 Subject 3 exam, it's essentially bringing daily driving into a test. The items include adjusting the seat and fastening the seatbelt before starting the car. During driving, the test evaluates straight-line driving without drifting and maintaining steady speed control. Lane changes require checking both sides and using turn signals for safe execution. At intersections, you must learn to slow down and give pedestrians the right of way. For parking, find an empty spot by the roadside and park accurately without hitting the curb. The exam might include additional tasks like operating fog lights as a demonstration. When teaching my grandson, I always emphasize that developing these small skills into safe habits is far more important than speed. If you don't pass the first time, don't worry—just go back and practice a few more nights.

Was this review help?
18
Share
Expand All
LaylaRose
03/24/2026, 12:02:57 AM

For us office workers, finding time to prepare for the C2 license subject three test can be challenging, but the test items are quite practical. It starts with checking the vehicle's condition, such as whether the lights and rearview mirrors are properly adjusted. When starting the vehicle, do it smoothly without rushing. During straight-line driving, keep the steering wheel steady and maintain a stable speed without exceeding limits. When changing lanes, use the turn signal for at least 3 seconds, check the rearview mirror, and execute safely. At intersections, slow down and pay attention to traffic lights and pedestrians. Pulling over is a key point—choose a safe spot, signal, and park within 50 cm of the curb. The light test might simulate nighttime driving, requiring you to switch on the headlights. During practice, I often used empty roads after work to focus on parking and turning details, which are easy to mess up, like forgetting to observe. Passing the test saves commuting time, making the effort worthwhile.

Was this review help?
7
Share
Expand All
More Q&A

Why can't the fuel tank cap of Audi A6 be opened?

Audi A6 cannot open the fuel tank cap reasons and solutions: 1. Reason: Central locking engaged. The fuel tank cap is generally linked to the central locking system inside the car. If the central locking is engaged, the fuel tank cap cannot be opened. Solution: Disengage the central locking. Turn on the ignition switch inside the car, press and hold the central locking button. If you hear a beep, it means the central locking is engaged; continue holding until you hear another beep, indicating the central locking is disengaged. After the locking is disengaged, you can open the fuel tank cap of the Audi A6. 2. Reason: The lock of the fuel tank cap is damaged. Solution: Press the emergency switch in the trunk. Find the emergency switch inside the car's trunk, pull the emergency switch, and then the fuel tank cap can be opened. The position of the emergency switch is related to the position of the car's fuel tank cap. If the car's fuel tank cap is on the left side of the body, the emergency switch in the trunk is on the left; if the car's fuel tank cap is on the right side of the body, the emergency switch in the trunk is on the right.
116
Share

How to start the Roewe RX5 when the battery is dead?

If the Roewe RX5 battery is dead, you can use jumper cables to charge it. Here are a few precautions regarding jumper cables: 1. Before connecting the jumper cables to the donor vehicle, make sure to turn off the engine. After connecting the jumper cables to the donor vehicle, be careful not to let the positive and negative terminals touch each other, as a short circuit can be dangerous. 2. When removing the jumper cables, first disconnect the negative terminal, then the positive terminal. 3. If the dead vehicle still doesn't start, it may be because the dead battery has too little residual charge, and the donor vehicle's power may not be sufficient to start it, which is normal. In this case, you can charge the dead vehicle for a longer time (revving the donor vehicle's engine can speed up the charging process).
110
Share

Where is the cabin air filter located in the BMW 118i?

The cabin air filter in the BMW 118i is located inside a small black box in the engine compartment directly in front of the front passenger seat. Below is some information about the BMW 118i: 1. The BMW 118i is a performance sports car from BMW. The vehicle is equipped with a 1.6T turbocharged engine, and the 8-speed automatic transmission ensures efficient power delivery. 2. The interior features an exclusive sports design package. As a sports version, the BMW 118i comes with exclusive interior trim, a sport leather steering wheel with red stitching, a car key with red detailing, adjustable armrests, high-gloss black interior trim strips, and red accent strips, all contributing to a highly sporty configuration. 3. The vehicle is equipped with an intelligent energy management system, including a kinetic energy recovery system, automatically disconnectable auxiliary components, electric speed-sensitive power steering, and the BMW 1 Series standard 'Auto Start-Stop function,' providing excellent energy efficiency.
112
Share

What to Do If You Lock Your Magotan Car Keys Inside the Car?

If you accidentally lock your Magotan car keys inside the car, here are the solutions: 1. Look for a spare key to open the car door. Usually, a spare key is provided by the manufacturer when purchasing a new car. Finding the spare key will allow you to open the door. 2. If the car is equipped with a mobile remote control function, you can unlock it remotely; for Magotan models without remote control, check if there is a smart box inside the car, which can also be used to unlock the door remotely. 3. Call a locksmith company to contact rescue personnel for unlocking. Before unlocking, you will need to provide identification such as your ID card and vehicle registration to prove ownership of the car. 4. Visit a 4S store to get a new key. The owner needs to find the car key password in the documents provided during the purchase of the new car and provide it to the 4S store. Only then can the staff proceed to make a new key.
111
Share

Should the Touareg use 5w40 or 0w40 engine oil?

The Touareg can use either 5w40 or 0w40 engine oil. These two types of oil have the same viscosity, but differ in low-temperature flow performance. Below are the specific differences in low-temperature flow between the two oils: 1. 5w oil can flow normally at temperatures as low as -30 degrees Celsius. 2. 0w oil can flow normally at temperatures as low as -35 degrees Celsius. Here is more information about engine oil: 1. Engine oil is referred to as the lifeblood of the engine. Without oil, the engine cannot operate properly. 2. In the engine, oil not only lubricates but also cleans, seals, cushions, prevents rust, and dissipates heat.
112
Share

How to Use the Built-in Dash Cam in the Teana?

Here are the steps to use the built-in dash cam in the Teana: 1. Insert a memory card before using the dash cam. 2. Press and hold the power button to turn it on or off. 3. Use the mode button to switch between video recording, photo taking, or preview mode. 4. Selecting video recording mode will automatically start recording; press the OK button to pause. Additional information about the dash cam: 1. The loop recording settings typically offer options like 1 minute, 2 minutes, 3 minutes, etc. 2. It is most suitable to set the loop recording time to 3 or 5 minutes. 3. The dash cam can record both video and audio during vehicle operation.
106
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.