···
Log in / Register

How many days does it take for the 12123 application for license replacement to be approved?

6Answers
MacZoey
08/30/2025, 01:36:23 AM

12123 application for license replacement is generally accepted and reviewed within 1 working day after submission. Once approved, the new license will be produced, and the postal department will be notified for delivery, which usually takes about 2-3 days. The following conditions must be met for license replacement and verification: Holders of large passenger vehicle, tractor, city bus, medium passenger vehicle, or large truck driver's licenses must have no demerit points in the current scoring cycle, or holders of other types of driver's licenses must have less than 12 demerit points in the current scoring cycle. Holders of large passenger vehicle, tractor, city bus, medium passenger vehicle, or large truck driver's licenses with demerit points in a scoring cycle, as well as holders of other types of driver's licenses who have been involved in a traffic accident resulting in death and bear equal or greater responsibility without having their driver's license revoked, must have completed the verification education. The applicant must have no pending road traffic safety violations or traffic accidents.

Was this review help?
104
Share
LeMadison
09/11/2025, 10:44:38 PM

Last time I applied for a license replacement on 12123, it went pretty smoothly! Generally, the review time depends on the specific situation. On weekdays, it usually takes about 1 to 3 days to get approved, but don't worry too much. Sometimes the system is busy or your documents aren't fully uploaded, which might delay it a bit longer, up to a week at most. I think the key is to check the status—after logging into the app, go to the service records and see if the progress bar has been updated. If there's no movement by the next day, try refreshing or contacting customer service. Also, make sure you fill in the information correctly to avoid rework, which can waste time. Keep your account and password in good shape to avoid getting stuck halfway. Patience is key here—don't drive around recklessly during the replacement period; just use a temporary license. Safety comes first, and the speed of the review won't stop us from driving safely.

Was this review help?
1
Share
Expand All
Anderson
10/25/2025, 11:32:55 PM

I think the license renewal review speed is quite decent, usually completed within one to three days, though it might slow down during peak periods like year-end. I learned a trick from a friend: after submission, don't just wait idly—check the 12123 app daily for progress updates. There's a notification bar that shows 'processing' or 'approved'. Many factors can extend the review time, such as unclear photos or mismatched form details. If you're in urgent need of the license, it's wise to apply a few days in advance rather than waiting until the expiration date. Network issues can also cause delays—if the signal is unstable and uploads fail, you might have to wait several extra hours. Rest assured, the process is standardized, and 90% go smoothly. If it feels unusually prolonged, just call the hotline for assistance—the customer service can help expedite it.

Was this review help?
4
Share
Expand All
VanOscar
12/08/2025, 10:52:46 PM

When renewing your license on 12123, the review is usually completed within three days. After uploading the documents, the system processes them automatically, which is very quick. The key is to ensure the information is accurate; otherwise, it will be rejected and waste a day. The daily operation is simple: log in to the APP to track the status, and avoid refreshing repeatedly. If the review is slow, it might be due to regional differences or server delays. It's advisable to leave some buffer time and not apply at the last minute. For safety, use a temporary license plate to drive before receiving the new license.

Was this review help?
10
Share
Expand All
ElisaAnn
01/29/2026, 12:02:15 AM

I feel the license renewal review on 12123 is quite reliable, usually completed within two working days on average. Don't just focus on the timeline—be meticulous when submitting details to avoid delays caused by errors. Progress is clearly displayed in the APP, with push notifications at halfway or completion points. If it stretches to the fourth or fifth day, check your internet connection or ensure all documents are complete, as some locations may extend deadlines during holidays. No need to panic; if urgent, call customer service and clearly describe the situation. Driving during license renewal carries risks, so always carry temporary permits to stay road-legal. Keep your phone accessible to avoid missing notifications.

Was this review help?
18
Share
Expand All
SanMalia
04/24/2026, 04:33:03 AM

The processing time for license renewal is usually within 1 to 3 days, and the 12123 system is quite efficient. I'm in the habit of checking the status immediately after submission, and it's reassuring once the progress bar updates. There are quite a few influencing factors—network delays, blurry photos, or slower processing during peak hours. It's recommended to apply on weekday mornings to avoid rush periods and speed things up. Don't stress during the review process; check the app's notification bar daily, as delays might mean additional documents are needed. On the safety front, remember: use a temporary license before approval to avoid violations. Wait patiently for a few days—there's no need to rush to the service window, as the system is generally reliable.

Was this review help?
9
Share
Expand All
More Q&A

Where is the factory that manufactures the WEY Tank 300 located?

China production. The WEY Tank 300 is a model under the WEY brand. Below is relevant information: Introduction: The Tank 300 is produced by the Great Wall Group. This model is built on the group's first professional off-road vehicle platform. True to its name, the Tank 300 exudes a domineering presence with its square front face, vertical grille, and round headlights—all classic ORV elements. Additional information: Another variant leans more towards urban styling. Apart from a small strip on the fenders and the side steps, the entire body cladding is color-matched to the vehicle. While there's no difference in the body structure, this design gives it a more refined and sporty look, similar to the approach taken with the G-Class.
103
Share

What engine does the BMW X3 use?

The engine of the BMW X3 is produced at the Spartanburg factory in South Carolina, USA, and is an imported engine. The BMW X3 engine model is B48. The low-power version has a maximum horsepower of 184, a maximum power of 135 kW, and a maximum torque of 300 Nm. The high-power version has a maximum horsepower of 252, a maximum power of 185 kW, and a maximum torque of 350 Nm. For daily maintenance of the BMW X3 engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions. For diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid malfunctions, oil should be changed regularly according to usage conditions, and the oil level should be kept moderate; When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication area, accelerating engine wear and increasing internal contamination; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. When the amount is small, it remains suspended in the oil; when large, it precipitates, clogging the filter and oil holes, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
103
Share

How many seconds does the Mustang 5.0 take to accelerate from 0 to 100 km/h?

According to official data, the Mustang 5.0 comes in two engine displacements: the 2.3L version accelerates from 0 to 100 km/h in 5.8 seconds, while the 5.0L version does it in 4.8 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time include: Torque: Torque, in simple terms, represents how much force is available. The greater the torque, the more force is available to propel the vehicle, resulting in faster acceleration. For example, the Equinox 1.5T has a maximum torque of 250 Nm and accelerates from 0 to 100 km/h in 10.2 seconds. The Mustang 5.0, with a maximum torque of 434 Nm, achieves this in 4.7 seconds. Transmission efficiency: The transmission acts as the medium for transferring power, inevitably involving some power loss. Higher transmission efficiency leads to better acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Mustang 5.0 is equipped with a 10-speed automatic transmission (AT). Power-to-weight ratio: The relationship between horsepower and vehicle weight is known as the power-to-weight ratio (measured in Hp/T). A higher power-to-weight ratio results in faster acceleration. For instance, the Equinox 1.5T has a power-to-weight ratio of 110.09 Hp/T and accelerates from 0 to 100 km/h in 10.2 seconds. The Mustang 5.0, with a power-to-weight ratio of 175.88 Hp/T, achieves this in 4.7 seconds.
115
Share

Can the Haval H6 screen play videos?

Yes, it can play videos. Below is the relevant information: Introduction: The Haval H6 is the flagship model of the Haval brand. On August 25, 2011, the Haval H6, positioned as an urban intelligent SUV, was grandly launched at the Great Wall Motors Tianjin new factory, offering Mitsubishi 2.0L gasoline-powered models and Green Power 2.0T diesel models, divided into Urban, Elite, and Premium versions. Exterior: After three generations of glorious evolution, the third-generation Haval H6 boasts a powerful presence; the Eastern-style future aesthetic design language ensures the exterior lines vividly showcase robust dynamic strength. Meanwhile, the interior features a futuristic smart cockpit design.
120
Share

Why does the Volkswagen Polo have power but no response when starting?

If the starter motor is not working, one possibility is that the battery is dead. Another possibility is that the starter motor is faulty. Below is relevant information: Reasons for battery depletion: Apart from the natural degradation of the battery itself, battery depletion is also related to the owner's usage habits. Some owners, in an effort to save fuel, prefer to turn off the engine and use electrical devices such as the car stereo or cigarette lighter. However, this can lead to rapid battery depletion and shorten the battery's lifespan. When the battery is depleted or nearing the end of its life, symptoms such as difficulty starting the engine and flickering dashboard lights during startup may occur. Additionally, the capacity and voltage of a dying battery will decrease, making it unable to start the engine after just one or two attempts. Battery maintenance methods: Before turning off the engine, always turn off all electrical devices in the car; avoid using electrical devices when the engine is not running.
105
Share

Where to Maintain ID6X?

Maintenance needs to be done at a 4S shop. Below is relevant information: Introduction: The ID.6X scores full marks in design, completely breaking away from the "traditional Volkswagen style" and interpreting future design aesthetics with a refreshing design language. The seats of the Volkswagen ID.6X are made of leather material. Advantages of the ID.6X: The dimensions of the ID.6X reach 4876/1848/1680mm in length, width, and height respectively. The purpose of increasing the body size is naturally to enhance the practicality inside the car. The ID.6X offers a 6-seat/7-seat layout and also features AR-HUD augmented reality head-up display.
112
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.