···
Log in / Register

How long does it take for the review to be approved after completing the required hours for Subject 2?

6Answers
Clark
07/24/2025, 07:39:37 AM

It takes about 15 days for the review to be approved after completing the required hours for Subject 2. Here is some relevant information: 1. Since learning Subject 2 takes about 15 days (or as fast as 10 days), and Subject 2 requires 24 credit hours (with a maximum of 4 credit hours per day), C1 license applicants must complete all 24 credit hours for Subject 2 before taking the exam. 2. According to the new "Motor Vehicle Driver Training Teaching and Examination Outline," the current credit hour requirements for C1 license training and examination are as follows: Subject 1 requires 12 credit hours, Subject 2 requires 26 credit hours (including 2 theoretical credit hours), and Subject 3 requires 40 credit hours (including 16 theoretical credit hours). Among these, the practical credit hours for Subject 2 (five compulsory tests) and Subject 3 (long-distance and road tests) are both 24 credit hours, accounting for more than half of the total 78 credit hours.

Was this review help?
117
Share
Gloria
08/10/2025, 10:51:06 PM

When I took the Subject 2 test, my hours were approved on the third day after completion. However, a friend at another driving school waited five days, saying their system was a bit slow. Generally, it takes one or two days, and results can even come out the same day if it’s fast, because the traffic management department automatically verifies the hours once they’re logged into the system. Many factors can influence this, like regional and driving school efficiency—big cities have faster online system updates, while smaller towns might take up to three days. During peak exam seasons, heavy traffic can slow the system, with a maximum wait of a week being acceptable. Don’t just wait idly; double-check your records with your instructor before your hours are complete. Once approved, you’ll get an SMS notification and can immediately schedule the exam—keep reviewing theory in the meantime. While waiting, avoid overthinking potential mistakes; stay calm, and everything will go smoothly.

Was this review help?
20
Share
Expand All
Herb
09/25/2025, 12:37:28 AM

The review for Subject 2 driving hours is usually completed within 24 to 72 hours after the required hours are met. Driving schools will promptly upload the data to the DMV system, and the automated review process runs quickly—approval typically happens the same day or the next if there are no issues. However, several factors can affect the speed, such as high data volume during peak periods like summer vacation, which might delay the process by a few days, or system maintenance and regional differences, where remote areas might take three to four days. It's advisable to confirm the submission status with your driving school after completing the hours to ensure the records are accurate and complete. Once approved, don’t hesitate to schedule your exam—this process is relatively reliable, so just be patient. If it hasn’t been approved within a week, check promptly to avoid any oversights.

Was this review help?
17
Share
Expand All
DelJace
11/08/2025, 01:45:10 AM

After completing the required hours, the review process usually takes one to three days. The driving school uploads the records, and the vehicle management department automatically verifies them before approval. In some areas with efficient online systems, it can be done in one or two days, but during peak exam periods, it may take up to four or five days. Don’t worry—this is part of the normal process. Just wait patiently for the system to complete the review. Once approved, schedule your Subject 2 exam as soon as possible to avoid delays, especially during peak periods when slots fill up quickly. If there’s a delay, it might be due to missing data or system congestion. If it takes over a week without results, contact your instructor to investigate. Staying in communication is key—confirm your records are accurate as soon as you complete the required hours to avoid issues.

Was this review help?
10
Share
Expand All
GriffinRose
12/29/2025, 03:31:16 AM

The review usually takes one to three days. Once the required driving hours are completed and the driving school uploads them to the vehicle management system, the process can be lightning fast. In some places, results come out the same day, but it's normal for it to take two or three days in slower areas, especially during peak exam seasons when it might extend to four or five days. Factors include whether the region uses an online system or manual verification, as well as the efficiency of smaller driving schools. The most reliable approach is to actively check the progress with the front desk after completing the hours—don't just wait and waste time. Once approved, book the exam directly to avoid missing the window. System updates usually go smoothly without major issues. If there's a delay, it might be due to data or system factors, so patiently check for accurate records.

Was this review help?
6
Share
Expand All
DeDeclan
03/26/2026, 11:05:52 PM

The review usually completes within two or three days after the required hours are met, so don't worry. The DMV system's automatic verification process is simple and reliable, but it may be delayed by factors such as peak seasons when more people are involved, possibly extending it by three or four days. It's recommended to confirm with your coach that all records are complete as the required hours approach to avoid missing items and resubmission delays. Once approved, you'll receive a text message notification—don't forget to schedule the exam immediately. If there are any issues, such as not passing after a week, promptly contact the driving school to check the cause. Minor system glitches are normal but always solvable. During the waiting period, avoid anxiety and instead review driving theory or preview the third subject for more practical use.

Was this review help?
4
Share
Expand All
More Q&A

How to Control Speed When Reversing into a Parking Space?

Methods to control speed when reversing into a parking space: 1. Press or release the clutch pedal very slowly and gently, as releasing it too quickly may cause the engine to stall; 2. Keep your heel on the floor to allow for precise control of the clutch pedal. The steps for reversing into a parking space are: depress the clutch, depress the brake, shift into reverse gear, turn on the right turn signal, release the handbrake, and release the foot brake. Reversing into a parking space is a mandatory test item for obtaining a small car driver's license, assessing the driver's ability to maneuver the vehicle in a confined space. It is one of the key evaluation points in the driving test, requiring the driver to correctly reverse the vehicle into a garage from both sides while in motion. There are three common types of reversing maneuvers: the first is reversing into a perpendicular parking space (non-linear type), the second is parallel parking along the roadside (linear type, commonly known as parallel parking), and the third is the less common angled reversing into a parking space.
108
Share

How to Use a USB Flash Drive in BYD Qin?

Insert the car USB flash drive with downloaded songs into the USB port of the BYD Qin. At this time, the car system will automatically scan and retrieve the music files from the USB flash drive. Once the car system obtains the relevant music files, you can directly play the music from the USB flash drive. Here is some relevant information about using USB flash drives in BYD Qin: Format: In most cases, the vehicle recognizes MP3 or WMA music files. Therefore, when downloading music, you must pay attention to the file format. If the format is incorrect, you must convert it to MP3 or WMA format. Path: Try to place the music files in the root directory of the car USB flash drive. If they are placed too deep, the car system may not be able to locate the files.
109
Share

What is the biggest difference between the Range Rover Sport and the Range Rover?

The differences between the Range Rover Sport and the Range Rover lie in their positioning, dimensions, and exterior design. Here are the detailed explanations: Different Positioning: The Range Rover Sport is geared towards a younger, more fashionable audience, while the Range Rover emphasizes business and stability. Different Dimensions: The Range Rover Sport measures 4879mm in length, 2073mm in width, and 1803mm in height, whereas the Range Rover measures 5000mm in length, 2073mm in width, and 1869mm in height. Different Exterior Designs: At the front grille, the Range Rover Sport features two lines, while the Range Rover has three lines. For the side air intakes, the Range Rover Sport has a horizontal layout with a curved, bow-shaped front, whereas the Range Rover's are rectangular from top to bottom.
109
Share

Can You Drive at 60 km/h in Third Gear?

You can drive at 60 km/h in third gear, but this is considered low-gear high-speed driving, which not only increases fuel consumption but also leads to engine carbon buildup and shortens the engine's lifespan. Below are the relevant details: Speed and Gear Matching: For manual transmissions, the typical speed ranges for each gear are: 1st gear: around 10 km/h; 2nd gear: around 20 km/h; 3rd gear: generally used for speeds between 20-40 km/h; 4th gear: speeds between 40-60 km/h; 5th gear: speeds above 60 km/h. Gear Shifting Precautions: When shifting gears, the clutch and throttle must be coordinated properly. Fully depress the clutch pedal, then release the throttle pedal, and quickly shift to the appropriate gear. After shifting, immediately remove your hand from the gear lever to avoid prolonged contact, which can damage the gear lever.
120
Share

How to adjust the time on a CRV?

There are several methods to adjust the time on a Dongfeng Honda CRV: Press the vehicle's one-touch start button: Press the vehicle's one-touch start button to power on the vehicle. Press the menu toggle button on the left side of the multifunction steering wheel: Press the menu toggle button on the left side of the multifunction steering wheel to bring up the time adjustment function. Press the res and set buttons on the right side of the multifunction steering wheel: Press the res and set buttons on the right side of the multifunction steering wheel to adjust the time display. Press the enter button on the left side of the multifunction steering wheel: Press the enter button on the left side of the multifunction steering wheel to confirm the time settings.
111
Share

How to Use a USB Flash Drive in BYD Qin?

Usage method of USB flash drive in BYD Qin: Insert the car USB flash drive with downloaded songs into the vehicle's USB port. At this time, the car will automatically load the files and retrieve the music files from the USB drive. In most cases, the vehicle recognizes music files in MP3 or WMA formats. Therefore, when downloading music, it is essential to pay attention to the file format. If the format is incorrect, it must be converted to MP3 or WMA format. Some car infotainment systems may not support USB drives with excessively large capacities. In some older car models, since the primary use of car USB drives is to store music, which does not occupy much space, it is sufficient to choose an appropriate car USB drive without requiring a large memory capacity.
117
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.