How is a car penalized and how many points are deducted for speeding over 50%?

How many kilometers should a new car run before the second maintenance?

Generally speaking, the second maintenance for a new car should be performed after driving 10,000 kilometers or around one year, which means it is spaced 5,000 kilometers or half a year from the first maintenance. Of course, for some car models where the first maintenance is relatively late, such as at 8,000 kilometers or 10,000 kilometers, the second maintenance will also be delayed accordingly. After the second maintenance, the performance of the new car is basically stable, and subsequent maintenance is usually performed every 10,000 to 15,000 kilometers. Below is an introduction to the second maintenance content: 1. Maintenance scope: In addition to the tasks of the first-level maintenance, it includes checking and adjusting the working conditions of the engine and electrical equipment, disassembling and cleaning the oil pan and oil filter, checking and adjusting the steering and braking mechanisms, disassembling and cleaning the front and rear wheel hub bearings, adding lubricating oil, disassembling and inspecting tires, and performing tire rotation, etc. 2. The purpose is to maintain the good working performance of various parts, mechanisms, and assemblies of the vehicle, ensuring their normal operation between two secondary maintenance sessions.

102

Share

What is the recommended tire pressure for a Ford Focus?

The standard tire pressure range for the Ford Focus is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data complies with the international GBT2978-2008 standard requirements. The Ford Focus is equipped with an active tire pressure monitoring system, and the values for all tires can be displayed on the dashboard. Generally speaking, a tire pressure exceeding 2.8 bar is considered too high, while a tire pressure below 2.0 bar is considered too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates wear on the central tread pattern, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Overextends tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increases friction coefficient with the road surface, leading to higher fuel consumption; Makes the steering wheel heavy and prone to deviation, compromising driving safety; Increases movement of tire components, causing abnormal heat due to excessive rolling; Weakens cord and rubber functions, leading to delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; Multiplies friction with the ground, sharply raising tire temperature, softening the tire, and drastically reducing strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no seal on top, four small spikes below, and an exclamation mark inside), there are generally three possible causes: Abnormal tire pressure: Typically alarms when pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system retains the previous data, causing the indicator light to stay on. Simply reset the tire pressure to resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If the sensor is damaged during driving, the tire pressure warning light will illuminate. In such cases, the only solution is to replace the sensor with a new one.

103

Share

Where is the air filter of Volkswagen Lavida located?

The air filter of Volkswagen Lavida is located on top or the right side of the engine. According to the vehicle's maintenance manual, the air filter should be replaced every 1-2 kilometers or during every other maintenance interval. However, it is recommended to clean the air filter every 5,000 kilometers to reduce the formation of throttle sludge. Function of the air filter: It filters out particulate impurities in the air, ensuring that sufficient clean air enters the cylinder, preventing floating dust in the air from being sucked into the engine, which accelerates the wear of the piston group and cylinder. Air filter: It is a type of filter, also known as an air filter cartridge, air cleaner, or air element. It is mainly used in engineering vehicles, automobiles, agricultural vehicles, laboratories, sterile operating rooms, and various precision operating rooms as an air filtration device. During engine operation, a large amount of air is sucked in. If the air is not filtered, the suspended dust in the air will be drawn into the cylinder, accelerating the wear of the piston group and cylinder. Larger particles entering between the piston and cylinder can cause severe cylinder scoring, especially in dry and sandy working environments. The air filter is installed in front of the carburetor or intake pipe to filter out dust and sand particles in the air, ensuring sufficient and clean air enters the cylinder. Dirty air filter: Using a dirty air filter while driving can cause insufficient engine air intake, leading to incomplete fuel combustion, resulting in unstable engine operation, reduced power, and increased fuel consumption. Therefore, the air filter must be kept clean. The automobile air filter is a device that removes particulate impurities from the air, consisting of one or several air-cleaning filter components. Its main function is to filter out harmful impurities in the air before it enters the cylinder, thereby reducing early wear of the cylinder, piston, piston rings, valves, and valve seats. Therefore, before air enters the cylinder, it must pass through the fine filtration of the air filter. A dirty air filter can cause poor engine performance, excessive fuel consumption, and engine damage. When inspecting the air filter, if it is found to have little dust and minor blockage, it can be cleaned by blowing compressed air from the inside out and reused. Severely dirty air filters should be replaced promptly.

113

Share

How to Identify if a Car is a Stock Vehicle?

To determine whether a car is a stock vehicle, follow these methods: 1. Check the vehicle nameplate: The nameplate is usually located below the B-pillar on the passenger side and is easy to find. The nameplate displays basic vehicle information, including the manufacturer, model, engine power, total weight, load capacity or passenger count, production number, production date, and manufacturer name. First, look at the manufacturing date. If the manufacturing date is within three months of your purchase date, it is not a stock vehicle. If it exceeds three months, it can generally be considered a stock vehicle. 2. Inspect tire wear and production date: Generally, new car tires show minimal wear. The tread hairs on the tire sidewalls should be clearly visible. If you notice the absence of tread hairs, be cautious. Next, check the tire production date. The sidewall has a series of numbers, such as 0717. The latter two digits (17) represent the production year, and the first two digits (07) represent the week, meaning the tire was produced in the seventh week of 2017. This allows you to calculate the production date as mid-February 2017. Compare this with the vehicle's production date on the nameplate. If they are close, it indicates the car is not a stock vehicle. A significant time gap warrants attention. 3. Examine the exhaust pipe interior: Insert a finger into the exhaust pipe. If it comes out clean, the car is new. If dirty, be cautious. A new car's exhaust pipe should not be dirty. Note that the odometer reading should not be the primary reference. 4. Inspect the engine compartment: Open the hood and check the engine compartment. A thick layer of dust or oil stains suggests prolonged storage or excessive mileage. Also, inspect components for deformation, discoloration, alignment, or signs of removal. 5. Check for aging or detached rubber parts: Open the doors and trunk lid to inspect seals and other rubber components. If seals are loose or aged, the car has been stored for too long. If the seals show no signs of replacement, the car is likely new. 6. Inspect the foot pedals: Open the doors and carefully examine each pedal. Excessive wear or dust in the gaps may indicate the car was a test-drive vehicle or stock car. Clean pedals suggest a new car.

101

Share

How to Fold Down the Rear Seats of a Great Wall Haval H6?

On both sides of the rear seats near the doors, you can find two recessed handle mechanisms. These mechanisms are marked with different colors for easy identification. Press both handles on the seats simultaneously to unlock the rear seats, ensuring to pull both handles downward at the same time. Additional relevant information is as follows: 1. There are two methods for folding down the rear seats: split-folding and full-folding. Full-folding refers to the backrest of the rear seats being a single unit. When more space is needed, the backrest can be folded down to increase the cargo area. However, when the rear seats are folded down, they cannot accommodate passengers. 2. Split-folding refers to the backrest of the rear seats being foldable in proportions, offering greater flexibility compared to full-folding. It allows folding down only half of the backrest to accommodate large items while the remaining part can still seat passengers. Different vehicle models have varying folding proportions. Generally, business vehicles have a higher folding proportion, with many allowing 100% seat folding. Folding down the rear seats can increase the trunk volume. 3. Vehicles with foldable rear seats are equipped with anti-collision steel plates to prevent sharp objects in the trunk (such as umbrellas) from penetrating the rear seats in the event of a rear-end collision. In confined spaces where doors cannot be opened or during emergencies, one can exit through the trunk.

104

Share

How to listen to music with a USB drive in an Audi Q3?

The USB port is located inside the center armrest. There is a USB port where you can play music. Press "△△" to go back one song or press "△△" to skip to the next song. More relevant information is as follows: 1. In terms of appearance, the front face design of the Audi Q3 is quite similar to that of the Audi Q7. The headlights on both sides are connected to the grille, creating a more three-dimensional effect. The internal LED daytime running light group appears to connect the headlights and the grille, while the diffuser area in the traditional fog light positions on both sides has been enlarged. Additionally, the redesigned taillight clusters offer high recognition when illuminated, with other body details remaining largely unchanged from the previous model. 2. The interior of the Audi Q3 features a very clean design with high craftsmanship. The wraparound cockpit is extensively wrapped in soft plastic materials, and the addition of silver trim enhances the texture. The functional buttons on the center console are neatly arranged, making it very easy to use. The large LCD screen is simple to operate, and the leather-wrapped steering wheel provides an excellent feel, equipped with multifunction buttons and paddle shifters to increase convenience and driving pleasure.

106

Share

How is a car penalized and how many points are deducted for speeding over 50%?

How many kilometers should a new car run before the second maintenance?

What is the recommended tire pressure for a Ford Focus?

Where is the air filter of Volkswagen Lavida located?

How to Identify if a Car is a Stock Vehicle?

How to Fold Down the Rear Seats of a Great Wall Haval H6?

How to listen to music with a USB drive in an Audi Q3?

What does the color display of the Accord's trip computer screen mean?

Does the new Corolla come with a manual transmission?

What is the difference between C1 and C3 driver's licenses?

How long can you drive without engine oil before cylinder scoring occurs?