···
Log in / Register

How deep is the rear seat folding in Honda XRV in centimeters?

6Answers
OBrandon
07/28/2025, 11:11:03 PM

Honda XRV rear seat folding depth: The depth after folding is 17.2cm. Additional information: 1. Company establishment: Honda Motor Co., Ltd. (Honda Giken Kogyo Kabushiki Kaisha) is the world's largest motorcycle manufacturer and also ranks among the world's top ten automobile manufacturers in terms of production and scale. It was founded in 1948 by the legendary figure Soichiro Honda. 2. Company scale: The company's headquarters is in Tokyo, with a total of approximately 180,000 employees. 3. Industry structure: Honda has become a multinational automobile and motorcycle production and sales group. In addition to automobiles and motorcycles, its products also include power machinery such as generators and agricultural machinery.

Was this review help?
113
Share
LaMaria
08/12/2025, 09:31:00 AM

Last time I helped a friend move, I measured the rear seats of the XR-V. When fully folded down, the distance from the tailgate to the front seat back is about 170 cm. When folding them down, remember to flip the rear seat cushions forward first before lowering the seatbacks to achieve a completely flat floor. I’ve actually managed to fit a 1.7-meter folding ladder and an IKEA long table board inside, and the tailgate could just close. However, the rear window area is slightly sloped, so stacking boxes too high might press against the glass. If you also fold down the front passenger seat, you can fit items up to 2.3 meters long, but this means you can only drive with a single seat—handy for emergency transport of long, narrow objects.

Was this review help?
6
Share
Expand All
VanAsher
10/02/2025, 01:28:43 AM

The actual measured depth when folded down is exactly 170 cm, with a trunk width of 1 meter and a height of approximately 84 cm. Folding down the rear seats requires two steps: first flip the seat cushion forward and secure the latch, then recline the backrest. I often use it to transport photography equipment, as tripods and sliders can be placed horizontally. For fragile items like potted plants, it's advisable to lay down a mat because there's a small 5 cm step after folding down the rear seats. Additionally, the area near the front seats is narrower, about 120 cm wide, so remember to adjust the front seats forward a bit when loading large items.

Was this review help?
19
Share
Expand All
StHailey
11/15/2025, 02:10:17 AM

The rear seats of my XR-V can be folded down to a length of 1.7 meters, but the actual cargo space depends on how you do it. If you simply recline the seatbacks, the rear headrests will raise the height by 5 cm, so you need to flip the seat cushions forward to achieve a completely flat surface. I measured two dimensions: 155 cm to the base of the rear headrests and 170 cm when pushed all the way to the front seatbacks. When moving, I once loaded a 1.6-meter-long fish tank and had to place foam underneath to close the tailgate properly. Note that there are wheel arch protrusions near the C-pillars, which reduce the width by 15 cm on each side, making it easy for large boxes to get stuck in the corners.

Was this review help?
6
Share
Expand All
VanFelicity
01/05/2026, 09:01:22 PM

Personally measured, the distance from the trunk to the front seat backrest is exactly 170 cm, but the rubber seal on the tailgate will reduce the depth by 3 cm. It's recommended to start measuring from the metal threshold when taking dimensions, otherwise a 170 cm object might not allow the door to close properly. I've carried skis up to 168 cm long, which fit perfectly when placed diagonally into the C-pillar triangle area. If the front seats are adjusted all the way forward, the depth can reach 182 cm, but the driver's seat will be very cramped. Additionally, there are hooks on both sides when the seats are folded down, which are super practical for securing cargo with straps—even a mattress won't slide around.

Was this review help?
6
Share
Expand All
Leonardo
04/02/2026, 03:29:58 AM

The official depth is 170 cm, but actual measurement with a tape from the rear threshold to the front seat back steel plate seam is 169.5 cm. Folding tip: First pull the seatback release lever, push the rear seat forward, then lift and fold the entire seat cushion upward until you hear a click to ensure proper positioning. Last week, I helped my brother transport a disassembled bicycle—a 175 cm frame could fit diagonally. Important reminder: The tailgate latch protrudes by 1 cm, so when fully loaded, it's best to wrap it with cardboard to prevent paint scratches. In pure flat mode, ten boxes of fruit can be transported very steadily.

Was this review help?
9
Share
Expand All
More Q&A

What is the initial password for FAW-Volkswagen SPIN?

FAW-Volkswagen SPIN initial password is usually 8888, 0000, 1688, 2688 or 1234. The function of the initial password: It is a production identification code required for clearing vehicle fault codes, matching performance after replacing important components, and matching car keys, which ensures vehicle security. Steps to use the initial password:
115
Share

Is Mazda an Imported or Joint-Venture Car?

Mazda is a joint-venture car. Its models utilize Japanese technology but are produced and assembled domestically in China, hence classified as joint-venture vehicles. Mazda is a Japanese automobile manufacturer headquartered in Hiroshima, Japan, and is the only car company in the world that develops and produces rotary engines. Among its lineup, the Mazda CX-5 is positioned as a compact SUV. In terms of body dimensions, it measures 4555mm in length, 1840mm in width, and 1710mm in height, with a wheelbase of 2700mm. The Mazda CX-5 comprehensively employs Skyactiv Technology in its engine, transmission, body, and chassis, making it a new mass-produced vehicle under the Skyactiv Technology platform.
110
Share

Where are the position lights located on a sedan?

Position lights on a sedan are located at the highest points of the front and rear of the vehicle. These lights are somewhat similar to the anti-collision lights installed on the wingtips of aircraft, primarily used to indicate the width and height of the car during driving in conditions such as dusk, overcast days, rain, or fog. This helps other vehicles determine their relative positions and sizes when meeting or overtaking. Typically, the color of the position lights is white at the front and red at the rear. Position lights serve as warning lights to alert other vehicles. They are mandatory for vehicles with a width exceeding 2.10 meters and optional for those between 1.80 and 2.10 meters in width.
115
Share

What are the reasons for a buzzing sound when the car's air conditioning is turned on?

Car air conditioning buzzing sound reasons are: 1. Dirty air filter causing excessive noise, it is recommended to clean the air filter; 2. Foreign objects in the blower fan blades causing abnormal sounds, you can first turn on the blower without starting the engine to determine if it's a blower issue; 3. Deformed car air conditioning fan blades or damaged fan motor; 4. Possible abnormal sound caused by worn clutch bearing in the air conditioning pump, requiring replacement of the air conditioning pump assembly; 5. Loose screws due to blower vibration, needing tightening; 6. Fan blades colliding with other components; 7. Worn or damaged fan motor.
113
Share

How to distinguish between the exterior of Corolla and Levin?

The exterior differences between the Corolla and Levin are mainly reflected in the front face and the rear. The methods to distinguish the appearance of the two models are as follows: Differences in taillights: The rear design of the Corolla is more rounded compared to the Levin, which helps maximize the trunk space. The Levin features LED taillights that are also more three-dimensional. Differences in headlights: The Corolla's headlights have a conventional design, while the Levin's headlights feature a hooked shape. Differences in the grille design: The Corolla has a horizontal bar-style grille, whereas the Levin has a mesh-style grille.
113
Share

What is the chassis code of the domestically produced BMW X3?

The chassis code of the domestically produced BMW X3 is G08. The chassis refers to the combination of the transmission system, running gear, steering system, and braking system in a car. It supports and installs the car's engine and its various components and assemblies, forming the overall shape of the car, bearing the engine's power, and ensuring normal operation. Taking the 2021 domestically produced BMW X3 as an example, it is a mid-sized SUV with a body length of 4717mm, width of 1891mm, height of 1689mm, a wheelbase of 2864mm, a minimum ground clearance of 216mm, and a curb weight of 1860kg. The front suspension of this car uses a double-joint spring strut front axle, and the rear suspension uses a multi-link independent suspension.
117
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.