How to Activate the Auto-Locking Function on Volkswagen Vehicles?

[Lorenzo]

To activate the auto-locking function on Volkswagen vehicles, follow these steps: 1. Ensure the gear is in the P (Park) position; 2. Turn the key to the ON position with all four doors closed; 3. Press the lock button; 4. Observe the dashboard for the hazard warning lights flashing twice; 5. The auto-locking function is now successfully activated. Taking the 2021 Volkswagen Tharu as an example, it is a compact SUV with the following dimensions: length 4453mm, width 1841mm, height 1632mm, and a wheelbase of 2680mm. The fuel tank capacity is 51 liters. The 2021 Volkswagen Tharu is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power output of 110kW, and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.

[LeRachel]

I recently set up the auto-lock feature on my Volkswagen, and the process was actually quite simple. Park the car in a safe location, start the engine but don't drive. Locate the menu button on the left side of the steering wheel to access the vehicle settings page on the central display. Select either the external settings or central locking option, where you'll find the auto-lock function switch. Remember to check the checkbox - some models even allow adjusting the locking speed (default is auto-lock when exceeding 15 km/h). After setup, turn off and restart the engine to test; open the door and exit to check the locking response. This feature is crucial for family safety, especially preventing accidental door opening when children are in the back seat. Note that infotainment systems may vary slightly across model years - consult your owner's manual if you can't locate the setting.

[LaCamilla]

As a parent who frequently drives children around, I strongly recommend enabling the auto-locking feature. This function automatically locks the doors while driving, preventing children from accidentally opening them and causing accidents. When setting it up, make sure the gear is in P (Park), then power on the vehicle without starting the engine. On the Volkswagen's central touchscreen, locate the CAR vehicle settings icon and open the door lock tab. Scroll down to find the 'Auto-lock while driving' option and switch it to 'Enabled'. After setup, it's advisable to test drive - you should hear a distinct click of the locks engaging when reaching about 20 km/h. For more reliable testing, rainy days are preferable as moisture might affect sensor recognition.

[StValerie]

I activated this feature on my Lavida last year. It mainly involves three steps: Press the start button twice without stepping on the brake to illuminate the dashboard; then use the OK button on the steering wheel to bring up the menu interface. Select the vehicle settings menu, enter the central door lock submenu, and activate the auto-lock option. The whole process takes no more than two minutes—just be careful not to accidentally hit the turn signal lever during operation. Button positions may vary across different models, but the logic remains the same: navigate through the vehicle settings layer by layer. Older models without a central control screen require using the buttons on the wiper stalk to switch menus. If you really can't find it, consider recording an operation video and asking at the 4S store.

[MatthewAnn]

I've tried activating the auto-locking feature using Volkswagen's built-in system. The steps are indeed intuitive: First, power on the vehicle without ignition, then press and hold the CAR button on the center console to enter the settings interface. In the comfort system module, there's an option with a lock symbol. After selecting it, you'll see the auto-lock switch - turn it on and the system will prompt for confirmation. The key is to verify that all doors can trigger the function. If possible, have someone assist in testing each door lock. Once successfully configured, it activates automatically with every start-up, which is much more convenient than manually pressing the lock button. The illuminated lock symbol on the instrument cluster confirms the function is active.

[McEvelyn]

Auto-locking is quite practical for daily driving. Remember to fasten your seatbelt when activating it, and operate while the vehicle is stationary. There are two paths to access the system settings: for models with LCD screens, select the CAR menu to enter the settings center; for older models with instrument clusters, use the multifunction steering wheel to bring up the hidden menu. After locating the door lock tab, enable the speed-sensing lock. Some models also allow setting unlock rules, such as pressing the unlock button once to only open the driver's door. After setting, it's recommended to wait three minutes after locking the car to test, as the system needs time to store the setting parameters. If it occasionally fails, simply reset the door lock control unit.