Does the BYD Tang Belong to New Energy Vehicles?

Where is the cruise control switch on the Leiling?

The cruise control switch on the Leiling is located on the multifunction steering wheel. The usage method is as follows: when the vehicle speed reaches above 40 km/h, turn on the cruise switch, then press the deceleration button to set the desired speed. The vehicle will maintain the set speed, and pressing the deceleration button again will activate the cruise function. The function will automatically deactivate when the brake is pressed. The Toyota Leiling has a body size of 4640mm in length, 1780mm in width, and 1455mm in height, with a wheelbase of 2700mm. The fuel tank capacity is 50 liters, and the engine types are turbocharged and naturally aspirated, with engine displacements of 1.2T and 1.8L. The vehicle type is a compact sedan. In terms of power, the gasoline version of the Toyota Leiling is equipped with a 1.2T + CVT powertrain combination, delivering a power output of 85kW and a peak torque of 185Nm.

18

1

Share

What causes the clicking sound when turning the steering wheel in an A4L?

The reasons for the clicking sound when turning the steering wheel in an A4L are: 1. Sound produced when the turn signal returns to position; 2. Abnormal noise from the steering column dust cover; 3. Abnormal noise coming from the steering wheel; 4. Abnormal noise from the shock absorber plane bearing; 5. Abnormal noise from the stabilizer bar. If the clicking sound is caused by friction between the steering column and the floor mat, it is mainly because the aftermarket floor mat installed in the car is too large (such as a full-coverage mat) and comes into direct contact with the steering column. Friction occurs as the steering column moves, so adjusting the position of the floor mat or replacing it can resolve the issue. If the abnormal noise comes from below the steering wheel, it might be caused by the steering column dust cover. Lack of lubrication in the dust cover can lead to friction sounds. In this case, the owner only needs to apply some grease inside the dust cover, and the abnormal noise will disappear.

9

4

Share

How to Solve the Reversed Rearview Image Issue?

To fix a reversed rearview image, you need to swap the front camera and the rearview camera. The issue of left-right inversion in the rearview image occurs when the front-view camera is mistakenly installed at the rear of the car during the installation of the rearview camera. This is the difference between the front camera and the rearview camera. Another possibility is that the vehicle's system has enabled mirror image conversion. The rearview image system, also known as the parking assist system, reverse visual system, or onboard monitoring system, provides clear visibility even at night through infrared technology. The onboard display uses TFT true color and is magnetically shielded to prevent signal interference and flickering.

13

4

Share

What does the 'r' in tires mean?

The 'r' in tires stands for radial tires, where 'r' is the abbreviation of the English word 'radial'. Car tires can be categorized by structure into radial tires and bias tires, with bias tires denoted by the letter 'b'. Radial tires can be further divided into three types based on the materials used: all-steel radial tires, semi-steel radial tires, and all-fiber radial tires. All-steel radial tires use steel cords for both the carcass and the belt layers, and are generally used in heavy-duty and construction machinery vehicles. Semi-steel radial tires use rayon or other fibers for the carcass and steel cords for the belt layers; this type of radial tire is commonly used in passenger cars or light trucks, such as buses. All-fiber radial tires use rayon or other fiber cords for both the carcass and the belt layers, with the belt layer cords requiring low-elongation fibers; this type of radial tire is typically used in low-speed passenger cars or tractors.

9

2

Share

What is the method for removing a car battery?

The method for removing a car battery is: 1. Prepare the necessary tools first; 2. Open the compartment where the battery is located; 3. You will see a fixed bar fastened on top of the battery, use an 8mm wrench to loosen it; 4. After loosening, remove it, and you will notice positive and negative signs nearby. Always remove the negative terminal first because contact with metal can cause a reaction, commonly seen as sparks; 5. Next, repeat the previous step to remove the positive terminal, and try to avoid contact with metal during the process; 6. Then, place the new battery in position, fasten the fixed bar into the groove below as it was before, and tighten it; 7. Repeat the steps above to reinstall, but pay attention to the order—this time, connect the positive terminal first, then the negative terminal.

11

5

Share

Is it necessary to install a neck pillow in a car?

It is necessary to install a neck pillow in a car. A car neck pillow is a type of neck pillow that can effectively ensure the safety of drivers and passengers. A comfortable neck pillow can adjust the driver's head by 15 to 20 degrees, avoiding compression of the jugular vein and reducing fatigue, which is beneficial for safe driving. Data shows that even at a speed of only 10 km/h during a collision, the forces of acceleration and deceleration are entirely exerted on the fragile neck of the occupants. Without the protection of a car neck pillow, the neck of the driver or passengers can be easily injured. In 26% of rear-end collisions, the head or neck of the occupants is injured. Beyond increasing passenger comfort, the primary function of a headrest is to protect the neck from injury.

16

2

Share

Does the BYD Tang Belong to New Energy Vehicles?

Where is the cruise control switch on the Leiling?

What causes the clicking sound when turning the steering wheel in an A4L?

How to Solve the Reversed Rearview Image Issue?

What does the 'r' in tires mean?

What is the method for removing a car battery?

Is it necessary to install a neck pillow in a car?

How to adjust the clock time on the 8th generation Accord?

How to Determine if a Vehicle is Pulling to One Side?

What is the fuel tank capacity of the new Passat?

What are the steps for wheel removal?