···
Log in / Register

Do You Start Over If You Fail in the Middle of Subject Two?

1Answers
DiBeckett
09/01/2025, 03:22:09 AM

If there are no clear instructions from the examiner or the system after failing during the test, you can brazenly continue to complete the remaining test items. Generally, during the test, the examiner may ask the failing candidate to exit the vehicle and wait or leave directly to improve efficiency, without allowing time to finish the entire test. Here is more related information: Precautions for Subject Two: Before starting, ensure the seat is adjusted and the seatbelt is fastened before verifying fingerprints. Each test item in the examination area is monitored by GPS positioning. The control line (yellow dashed line) of each item represents the test area. Once the front of the vehicle crosses the control line, it means the test for that item has begun, and the candidate must complete the test according to the rules. Before proceeding to the next test item, check if there is a vehicle ahead still taking the test. If there is, you must stop before the yellow line of that item and wait; do not enter.

Was this review help?
107
Share
More Q&A

Is the Tayron from FAW or SAIC Volkswagen?

Tayron belongs to FAW-Volkswagen. FAW-Volkswagen, officially known as FAW-Volkswagen Automotive Co., Ltd., was established on February 6, 1991. It is a large passenger vehicle manufacturing enterprise jointly operated by China FAW Corporation Limited, Volkswagen AG, Audi AG, and Volkswagen (China) Investment Co., Ltd. Below are the specifications of the Tayron: The vehicle has a length, width, and height of 4589mm, 1860mm, and 1660mm respectively, with a wheelbase of 2731mm. It is equipped with a CUG 2.0T high-power engine and a DBF 2.0T low-power engine, with maximum power outputs of 220 horsepower and 186 horsepower respectively, paired with a 7-speed dual-clutch transmission.
112
Share

What Causes Bad Odor in Car Air Conditioning?

The reasons for bad odor in car air conditioning are: 1. The air filter has not been cleaned for a long time, and the humid air during rainy seasons makes the filter damp and warm, leading to mold growth and a musty smell; 2. Outside air flows through the air conditioning system's pipes, where a small amount of residual moisture combines with dust in the air. If not cleaned for a long time, this can also lead to mold and produce a sour, rotten odor. Below are solutions to eliminate bad odor in car air conditioning: 1. Regularly clean the air conditioning system or replace the air filter to reduce mold growth; 2. Master the correct method of turning the air conditioning on and off. Generally, it is best to turn off the air conditioning 5 minutes before parking, then switch to natural air to quickly restore the car's internal temperature, preventing condensation inside the air conditioning pipes due to temperature differences after parking, thus keeping the pipes dry and preventing mold and fungus growth; 3. Use natural air fresheners. You can place fruits like pineapples, lemons, or apples in the car to help eliminate odors; 4. Frequently use the AUTO button on the air conditioning panel to maintain a relatively stable temperature inside the car, ensuring comfort and maintaining air quality.
105
Share

How to resolve the EPC warning light in a car?

Here are the solutions and potential faults when the EPC warning light appears in a car: 1. Intake system faults, such as leaks or blockages. Dirty throttle body with excessive carbon buildup. Use of substandard fuel; 2. Abnormal cylinder pressure, poor engine performance. Valve faults, sticking or carbon deposits. ECU malfunction. Occasional faults or false warnings; 3. Troubleshoot intake system issues, use qualified fuel, clean the throttle body. Remove carbon deposits from relevant components. Reflash ECU-related data. Additional information: When the EPC warning light illuminates, the owner can first try turning off and restarting the engine to see if the EPC light remains on. If it turns off, it indicates no significant issue—just a false warning due to EPC light interference. If it stays on, prompt resolution is required.
117
Share

What brand is the Mitsubishi ASX engine?

Mitsubishi ASX is equipped with the Mitsubishi 4A92 engine produced by Shenyang Dongan Mitsubishi Engine Factory. The new ASX is powered by a 2.0L naturally aspirated engine paired with a CVT transmission, which features a steel belt-type transmission mechanism. Below is relevant information about the Mitsubishi ASX: GAC Mitsubishi ASX uses 1.6L and 2.0L engines. The 2.0L model is equipped with a 4B11 MIVEC naturally aspirated engine, matched with the third-generation INVECS CVT continuously variable transmission.
107
Share

How to Replace the Key Battery for a Haval Car?

Haval car key battery replacement tutorial is as follows: 1. Prepare a screwdriver and locate the opening notch on the side of the key. 2. Use the screwdriver to pry open the key along the seam from the notch to reveal the inner core of the key and locate the battery. 3. Use the screwdriver to remove the old battery, replace it with a new one, and reassemble the key in the reverse order. Below are the relevant details for the Haval H2: The Haval H2 is a compact SUV launched by the Haval brand under Great Wall Motors. The Haval H2 has a body length, width, and height of 4335mm, 1814mm, and 1695mm respectively, with a wheelbase of 2560mm.
106
Share

Can Electric Vehicles Be Charged on Rainy Days?

It is not recommended to charge during heavy rain. The waterproofing of electric vehicle charging components meets strict standards, ensuring insulation, and charging is possible during light rain. However, charging is not advisable during heavy rainfall. Measures for charging during rainy weather: Use an umbrella when unplugging the charging gun: If it rains while charging, use an umbrella to cover the charging gun when unplugging it to prevent it from getting wet. After removing the charging gun from the charging station, check if the gun head is intact and whether there is water or other foreign objects inside to ensure charging safety. Ensure proper connection of the gun head: After confirming the charging gun is in good condition, open the protective cover of the vehicle's charging port and insert the charging gun. If the connection is successful, the chance of water leakage is minimal. Check if the charging station is functioning properly: After successfully connecting the charging gun, monitor the display on the charging station to see if charging has begun. If charging does not start, take immediate action and adjust the charging gun as needed. Cover the charging port promptly after charging: Once charging is complete, first power off, then remove the charging gun from the vehicle's charging port. While unplugging the charging gun, securely close both covers of the vehicle's charging port to prevent water ingress and potential safety hazards.
114
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.