Prado air conditioner switch is turned off, the compressor will stop. If it does not stop, it may be due to relay adhesion or a problem with the switch controlling the compressor. To use the air conditioner in the Prado, the A/C button is required, which is the air conditioner switch DUAL button. This button is used to independently set the temperature for the driver's seat and the front passenger seat. Pressing this button can switch from independent mode to joint mode. The following is the Prado air conditioner usage guide: 1. Adjust the air conditioner temperature: The "+" and "-" adjustment keys are located on the left and right sides of the screen, and each press can increase or decrease the temperature by 0.5℃. 2. Seat heating: The two buttons in the lower left and lower right corners of the screen are the seat heating buttons, which control the temperature adjustment for the driver's cabin and the passenger seat respectively. 3. Temperature zone control: The "DUAL" button next to the A/C button in the air conditioner cooling mode is the button for temperature zone synchronization control. 4. Footwell temperature: In the button bar at the bottom of the screen, click the middle "···" button to open the multimedia settings options above, and then you can adjust the footwell temperature. 5. Warm air and hot air activation: Before heating with the air conditioner, turn off the A/C button. Heating is completed through the glass heating wire and the temperature of the coolant, without the need for the compressor to work.
