···
Log in / Register

Do all new cars come with a spare tire?

1Answers
LeIvan
07/28/2025, 05:52:10 AM

New cars are equipped with a spare tire. When inspecting a new car, pay attention to the following aspects: 1. Paint: Walk around the car to check for any scratches or color discrepancies on the paint surface, as these can occur during transportation. 2. Mileage: Typically, new cars may have driven a few dozen kilometers due to relocation processes after production. However, if the mileage exceeds 70 kilometers, it may indicate prior use by someone else. 3. Lights: Inspect the lighting system, including headlights, brake lights, fog lights, and turn signals. 4. Tires: Check for tire wear, ensure the spare tire is intact, verify the presence of tread hairs, and confirm that the production dates are similar. 5. Engine: Start the vehicle to ensure the engine operates smoothly without unusual vibrations or other symptoms.

Was this review help?
120
Share
More Q&A

What is the best mileage for the first maintenance of a new car?

Generally, the first maintenance for a new car is recommended at 5,000 kilometers. In most cases, it is advisable to visit the dealership for maintenance between 4,000 and 5,000 kilometers. Below is some extended information about car maintenance: 1. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 2. Car maintenance mainly includes the maintenance of the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. The purpose of car maintenance is to keep the car clean and tidy, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.
114
Share

What is the speed limit on curves?

When driving on sharp curves, the maximum speed should not exceed 30 kilometers per hour. Speeding poses risks, so safety must be prioritized while driving. Introduction to the risks of speeding: The dangers of speeding on curves are not limited to the increased likelihood of rollovers. More importantly, curves often have large blind spots, and if there is oncoming traffic, the probability of severe accidents resulting in fatalities is significantly higher. Driving precautions: Before entering a curve, honking can alert potential oncoming vehicles. It is crucial to control speed and maintain a safe distance while driving. Keeping a safe distance is essential, and drivers should also look ahead to assess road conditions and surroundings.
107
Share

Where is the suspension stiffness adjustment button for the Avalon?

The Avalon does not provide a button for suspension stiffness adjustment, as it employs an automatic suspension stiffness adjustment system. Below are the detailed specifications of the Avalon: 1. The Avalon features a sporty design overall and is classified as a mid-size sedan. 2. The Avalon offers two engine displacement options: 2.0L and 2.5L. The maximum horsepower is 178ps and 209ps, respectively; the maximum power output is 131kw and 154kw; and the maximum torque is 221N·m and 250N·m. 3. The fuel options include hybrid and gasoline, with the gasoline version requiring 92-octane fuel. The emission standards meet China 5 and China 6. The transmission options include E-CVT continuously variable transmission, CVT continuously variable transmission, and an 8-speed automatic transmission with manual mode.
111
Share

Is 90 Degrees Celsius Normal for Cummins Engine Coolant Temperature?

The normal operating temperature is around 90°C. Below are the common causes of overheating: Insufficient coolant: Coolant leakage can cause temperature rise. In this case, check for any signs of coolant leakage. If found, promptly repair the leaking pipes or components. If no leaks are detected, replenish with the same brand of coolant. Adding water is not recommended, especially in winter, as it can dilute the coolant even if it doesn't cause immediate malfunctions. Radiator fan malfunction: A faulty radiator fan may prevent proper heat dissipation during high-speed operation, causing heat to accumulate instead of transferring to the antifreeze. This leads to increased antifreeze temperature and potential boiling-over issues. If this occurs while driving, first reduce vehicle speed. Inspect whether the fan is functioning properly. If faulty, repair it immediately rather than waiting for the coolant to boil.
101
Share

What is the wading depth of new energy vehicles?

10CM. Currently, the only clearly defined standard for the wading depth of new energy vehicles is the national standard GB/T18383.3. This standard specifies that the wading depth for new energy vehicles should be 10CM, with a speed of 20KM/h, a travel distance of 500m, and a wading time of 1.5min. Below are the relevant details: Wading test standards: In fact, local regions also have their own wading test standards for new energy vehicles. For example, Shanghai's pure electric vehicle admission policy includes the mandatory DB31T634-2012 standard, which requires simulating the wading conditions during vehicle operation. Pure electric vehicles must drive through 15 centimeters of water at a speed of over 30km/h for a total wading time of 10 minutes. Then, in 30 centimeters of water, they must drive forward and backward at a speed of no less than 5km/h for a total wading time of 10 minutes. This test further ensures that new energy vehicles have sufficient safety for driving. Additionally, Beijing has its own local standard for electric vehicles, defining a wading depth of 20CM. Test methods: Furthermore, according to the "Safety Requirements and Test Methods for Power Batteries in Electric Vehicles" issued by the General Administration of Quality Supervision, Inspection and Quarantine, clear safety indicators and test methods are provided for individual power batteries and modules of new energy vehicles. Among these test methods, it is required that saltwater can easily corrode products. Battery cells, in a fully charged state, should be soaked in a 3.5% NaCL (sodium chloride, simulating seawater) solution for 2 hours without any incidents such as fire or explosion.
117
Share

Should the clutch be fully released before accelerating after shifting gears?

After shifting gears, the clutch should be fully released before accelerating. Introduction to the car clutch: The clutch is located in the flywheel housing between the engine and the transmission. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. The clutch is one of the important components of a car. Introduction to the car throttle: Also known as the "air throttle" or "throttle valve," it refers to the control device that regulates the engine power (thrust). In piston aircraft engines, the throttle controls the opening of the carburetor's throttle valve to regulate the cylinder's weight, thereby determining the engine's output power.
105
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.