Differences Between Emergency Parking Lanes and Passing Bays on Highways

What Causes a Manual Transmission Car to Shudder When Starting?

Manual transmission vehicles may shudder when starting due to the following reasons: 1. The clutch is in a semi-engaged state during startup, causing a certain degree of slight vibration; 2. Insufficient throttle application or rapid clutch release; 3. Uneven clutch pressure plate and friction disc; 4. Dirty throttle body or excessive carbon buildup in the fuel injectors. The hazards of a manual transmission vehicle shuddering during startup include: 1. Aggravating carbon deposits in the car's engine; 2. Damaging the car's spark plugs; 3. Accelerating the aging process of engine components. Solutions for manual transmission vehicle startup shudder include: 1. Cleaning the throttle body; 2. Cleaning the fuel system; 3. Removing carbon deposits from the engine and fuel injectors; 4. Replacing the clutch.

101

Share

Can a motorcycle temporary license plate be placed in a bag?

A motorcycle temporary license plate can be placed in a bag. Introduction to temporary license plates: A temporary license plate is a paper motor vehicle license issued to allow temporary road use of a vehicle, also known as a temporary driving license plate. It refers to a temporary vehicle driving certificate issued by the vehicle management department of the public security bureau before a newly purchased vehicle is officially registered. The validity period of a temporary license plate generally does not exceed thirty days. There are four types: temporary license plates for administrative jurisdictions, temporary license plates for cross-administrative jurisdictions, temporary license plates for testing purposes, and temporary license plates for special motor vehicles. Usage of motorcycle temporary license plates: Due to installation constraints, the temporary driving license plate for motorcycles remains a single sheet of paper. It should be affixed to one side of the motorcycle body in a position that does not obstruct the driver's view to ensure riding safety. Alternatively, it can be carried on the person and presented when needed. When a motorcycle needs to travel temporarily across regions, it must obtain a temporary cross-regional driving permit from the vehicle management authority. The vehicle can travel temporarily within the specified time and roads with the temporary license plate. The validity period of a temporary license plate generally does not exceed thirty days. There are four types of temporary license plates, including temporary license plates for administrative jurisdictions, temporary license plates for cross-administrative jurisdictions, temporary license plates for testing purposes, and temporary license plates for special motor vehicles.

103

Share

How to Turn Off the Engine Start-Stop Function in the Tayron?

The method to turn off the engine start-stop function in the Tayron is to press the start-stop button with a circular arrow surrounding the letter 'A'. The usage method of the Tayron's engine start-stop is: 1. Press the engine start-stop switch button to activate the engine start-stop; 2. Step on the brake pedal to turn off the engine, then step on the brake again to restart the engine. Taking the 2020 2WD Comfort Smart Link Edition Tayron as an example, its body dimensions are: length 4589mm, width 1860mm, height 1660mm, wheelbase 2731mm, fuel tank capacity 60L, and trunk capacity 1590L. The 2020 2WD Comfort Smart Link Edition Tayron is equipped with a 1.4L turbocharged engine, with a maximum horsepower of 150PS, maximum power of 110kW, maximum torque of 250Nm, matched with a 7-speed dual-clutch transmission.

105

Share

Why Does the Engine Make a Rattling Noise with Insufficient Power When Climbing?

Engine knocking can cause insufficient power and abnormal engine noise when the car is climbing. Engine knocking is an abnormal combustion phenomenon where the high-pressure air-fuel mixture reaches its auto-ignition temperature and begins to combust violently before the spark plug fires, while the mixture is still in the compression process. Causes of engine knocking: Incorrect octane rating of gasoline: If the vehicle is labeled for 95-octane fuel but 92-octane fuel is added instead, the insufficient octane rating can lead to knocking and detonation. Carbon deposits in the combustion chamber: An engine intake tract that hasn't been cleaned for a long time can accumulate a lot of carbon deposits. Excessive carbon deposits can increase the engine's compression ratio, leading to knocking and detonation. Faulty spark plugs: If any one of the four spark plugs fails to ignite properly, it can cause knocking. Therefore, spark plugs should be replaced promptly. Symptoms of engine knocking: Significantly increased engine noise: When the engine knocks, the overheated and expanded piston will rub violently against the cylinder block, causing abnormal engine noise. Noticeable engine vibration or even black smoke: The expanded piston will inevitably hinder the piston movement, and increased friction between the piston and cylinder block can cause severe engine vibration. Overheating of the radiator: Due to increased movement resistance, the pressure inside the engine cylinder becomes very high, which can easily lead to engine overheating.

118

Share

What is the method for using an automatic transmission gear shift?

The method for using an automatic transmission gear shift is: 1. Start the vehicle in P or N gear, shift the gear lever out of P gear while stepping on the brake, turn on the power and step on the brake to shift to N gear, then after ignition, shift to D gear to move forward; 2. When switching between N, D, and L gears, there is no need to press the shift button. When shifting from L gear to lower restricted gears, press the shift button, but when shifting from lower to higher gears, there is no need to press the shift button; 3. Do not shift into N gear while driving to coast; 4. After driving, turn off the engine and shift into P gear before removing the key. Precautions when driving an automatic transmission car are: 1. Automatic transmission cars have protection and interlock functions for dangerous actions. You can freely switch between D and N gears, but switching from D to R or P incorrectly can be dangerous; 2. When parked on a steep slope where gravity exceeds the idle power, the car may roll backward, so you should use the handbrake to start; 3. Coasting in neutral for a long time can cause insufficient oil pressure in the hydraulic lines of the automatic transmission, damaging the friction plates inside the automatic transmission.

113

Share

Should the Steering Column Be Replaced if It Makes Noise?

Should the Steering Column Be Replaced if It Makes Noise? Introduction to the Steering Column: The steering column is the component that connects the steering wheel and the steering gear in the steering system. Through the steering column, the driver transmits torque to the steering gear, which then drives the steering gear to achieve steering. Common types of steering columns include hydraulic power steering columns, electro-hydraulic power steering columns, and electric power steering columns, each with different systems. The steering column is the component that connects the steering wheel and the steering gear in the steering system. Through the steering column, the driver transmits torque to the steering gear, which then drives the steering gear to achieve steering. Common types of steering columns include hydraulic power steering columns, electro-hydraulic power steering columns, and electric power steering columns, each with different systems. Introduction to the Steering Wheel: The steering wheel is the wheel-shaped device used to control the direction of cars, ships, airplanes, etc. Its function is to convert the force applied by the driver to the edge of the steering wheel into torque and then transmit it to the steering shaft. Initially, cars were controlled by a tiller. This design transmitted the severe vibrations generated during driving to the driver, making it difficult to control the direction. When the engine was moved to the front of the vehicle, the increased weight made it impossible for the driver to continue using the tiller. The steering wheel, a new design, emerged to address this issue. It introduced a gear system between the driver and the wheels, providing flexible operation and effectively isolating the severe vibrations from the road. Moreover, a good steering wheel system can also give the driver a sense of close connection with the road.

112

Share