···
Log in / Register

Can the Subject 3 Driving Test Be Taken on Weekends?

1Answers
VonCamilla
09/08/2025, 10:48:29 PM

Subject 3 driving tests cannot be taken on weekends. Additional information: Precautions for the Subject 3 driving test: If the examinee's fingerprint verification fails, they must exit the vehicle to re-collect their fingerprint before rejoining the queue for the test. During the test, if the examinee's score falls below the passing threshold, the system will automatically prompt them to pull over. After completing the pull-over maneuver, the system will indicate the start of the next test segment. Once the examinee has completed all mandatory test items and driven a distance exceeding 3 kilometers, the system will automatically prompt them to pull over. Upon hearing the pull-over instruction, the examinee should independently select a clear curb area along the test route and complete the maneuver after ensuring safety. After pulling over, the system will announce the test results via voice broadcast. When inspecting the vehicle's exterior and surroundings by walking around it, maintain a distance of within 1 meter from the vehicle body to ensure accurate radar signal detection. In cases where multiple examinees are preparing for the test simultaneously, after one examinee finishes, the next must follow the standard procedure: exiting the vehicle, preparing to re-enter, walking around the vehicle, and beginning with the nighttime light simulation before starting the test.

Was this review help?
116
Share
More Q&A

Should the fuel tank of a new car be filled up?

The fuel tank of a new car should be filled up. The functions of filling up the fuel tank of a new car and the fuel gauge warning light are as follows: Functions of filling up the fuel tank of a new car: It can verify whether the fuel gauge of the new car is accurate. Apart from the first refueling which should be full, there is no need to fill up the tank during subsequent refueling, as a full fuel tank increases the weight of the vehicle, leading to higher fuel consumption, which is neither economical nor environmentally friendly. Choosing to refuel in the morning can effectively avoid a reduction in the amount of fuel due to a large amount of gas in the tank. Functions of the fuel gauge warning light: When it lights up, it serves as a reminder that the fuel level is low and it's time to refuel. Otherwise, insufficient gasoline may prevent the fuel pump from dissipating heat, resulting in the fuel pump being burned out.
115
Share

Does applying cleaning wax affect car paint?

Applying cleaning wax can cause fine scratches on the paint surface. Relevant introduction about car cleaning wax is as follows: Functions of cleaning wax: It has the effects of removing stains, rust, preventing scale and maintaining brightness. Steps for using cleaning wax: First, park your car in a shady place and let the engine cool down, as high temperature will make it difficult for the cleaning wax to adhere to the paint. Before waxing, wash the car body thoroughly. If some stains are difficult to remove, you can use car wash liquid for cleaning. After washing, be sure to dry the water completely, otherwise it will also affect the adhesion of the wax. Use a sponge or professional instrument to evenly apply the cleaning wax on the surface of the car paint. Wait for about 15 minutes and then polish with a professional polishing towel.
115
Share

How many points are deducted for retrofitting xenon lights?

Retrofitting xenon lights will result in a deduction of 3 points due to illegal use of lighting equipment. Below is relevant information: 1. Definition of xenon lights: Xenon lights, also known as HID (High-Intensity Discharge) headlights in the automotive lighting field, replace traditional tungsten filaments with high-pressure xenon gas enclosed in quartz tubes to provide higher color temperature and more focused illumination. Xenon lights operate by using high-voltage current to activate xenon gas, creating an arc of light that continuously discharges between two electrodes. 2. Working principle of xenon lights: The illumination mechanism involves filling a UV-cut anti-ultraviolet crystal quartz tube with various chemical gases, predominantly xenon (Xenon) and iodides, then using a ballast to instantly boost the vehicle's 12V DC voltage to 23,000 volts, which excites the xenon electrons inside the quartz tube through high-voltage oscillation.
117
Share

Is it possible to remove auxiliary devices from C5 registered vehicles?

It is possible to remove auxiliary devices from C5 registered vehicles. After registration, ordinary small passenger vehicles can be converted into special vehicles for the disabled by installing auxiliary control devices for the disabled. These auxiliary control devices can be removed, and the vehicle type can be restored to its original configuration. Below is an introduction to the specific procedure: After removing the auxiliary control devices yourself: Bring the vehicle owner's identity proof, vehicle registration certificate, and registration document to the vehicle management office's service point. If the inspection meets the regulations, the modification can be processed. Upon verification, if the original certificate and invoice of the auxiliary control device have been retained, the originals can be returned and copies can be kept.
112
Share

What is the 0-100 km/h acceleration time of the Alfa Romeo Giulia Quadrifoglio?

According to official data, the Alfa Romeo Giulia Quadrifoglio comes with two engine displacements: 2.0T and 2.9T. The 2.0L model accelerates from 0-100 km/h in 5.2 seconds, while the 2.9L model achieves it in 3.9 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in simple terms, represents the strength of the engine. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. The Giulia 2.9L has a maximum torque of 600 Nm, achieving 0-100 km/h in 3.9 seconds. In comparison, the Audi A5 has a torque of 320 Nm and accelerates from 0-100 km/h in 6.4 seconds. Transmission efficiency: The transmission acts as a medium for power delivery, inevitably involving power loss. Higher transmission efficiency leads to better acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Alfa Romeo Giulia Quadrifoglio is equipped with an 8-speed automatic transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit: Hp/T). A higher power-to-weight ratio results in faster acceleration. The Giulia 2.9L has a power-to-weight ratio of 97.99 Hp/T, achieving 0-100 km/h in 3.9 seconds. The Audi A5 has a power-to-weight ratio of 126.36 Hp/T and accelerates from 0-100 km/h in 6.4 seconds.
107
Share

Is it necessary to wear a seatbelt in the passenger seat?

It is necessary to wear a seatbelt in the passenger seat. Here are the relevant details: 1. Regulations: According to the Road Traffic Safety Law, when a motor vehicle is in motion, passengers in the passenger seat must also use seatbelts. The requirement for passengers to wear seatbelts has been clearly stipulated in the old traffic regulations. Passengers who do not wear seatbelts in the passenger seat can be penalized by traffic police on duty. 2. Hazards of not wearing a seatbelt: In a potentially fatal car accident, wearing a seatbelt can increase the survival rate of passengers by 60%. In a frontal collision, wearing a seatbelt can reduce the mortality rate by 57%; in a side collision, it can reduce the mortality rate by 44%; and in a rollover, it can reduce the mortality rate by 80%.
106
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.