···
Log in / Register

Can the Car Film Provided by 4S Stores Be Used?

3Answers
QuinnLynn
07/29/2025, 07:23:02 AM

If it is some low-quality car film, it is better not to use it. If it is a product from a reputable brand with good quality, it can be used. Nowadays, many 4S stores offer gifts to customers after purchasing a car, such as floor mats, car films, and some car electronics. It is essential to carefully check whether the floor mats, films, and other products provided by the 4S store are high-quality and compliant. If they are inferior products, it is better not to install them in the car. Inferior films and floor mats can release toxic substances, affecting the health of passengers. Moreover, poor-quality films can significantly compromise driving safety, as their light transmittance does not meet standards, which can be hazardous during night driving. Inferior films also fail to block UV rays and provide heat insulation, accelerating the aging of the car's interior when parked under direct sunlight. It is recommended to purchase a high-quality film from a reputable brand after buying a car. Good-quality films can provide heat insulation and UV protection, safeguarding the car's interior. Additionally, premium films last longer and do not release harmful substances. High-quality car films have excellent light transmittance, ensuring safe night driving. When applying the film, it is advisable not to install it on the front windshield, as the windshield already has UV protection, and applying film there can impair driving visibility.

Was this review help?
113
Share
StAndrew
08/13/2025, 02:45:40 PM

I've been driving for twenty years, and every time I pick up a new car from the 4S shop, they give me free window films. I think they're completely usable, but don't expect anything too high-end. Those free films are usually basic models, with decent UV protection and heat insulation—enough for daily sun protection. However, after two or three years, they tend to bubble or fade, which not only affects appearance but also visibility. The key issue is the installation quality. The workers at 4S shops may lack experience in applying films, leading to bubbles if not applied properly or misalignment that looks unappealing. But since it's free, it's a money-saving option for now, and you can consider upgrading to professional films later for better durability. On a related note, it's better to choose light-colored films for higher safety—don't go for dark ones just for privacy, as they can be dangerous when driving at night. Overall, they're fine as entry-level options, but don't expect them to last too long.

Was this review help?
12
Share
Expand All
Peter
05/09/2026, 04:57:08 AM

The car film provided by the 4S shop when I got the new car is usable, with an average effect. It's okay for heat insulation, quick to install but poor in details, and the edges were not well applied, causing wrinkles within half a year. Related topics are types of car films; the basic model given for free may not be durable, while professional ceramic films are more expensive but last longer. It's fine to use the free one for now to save some money, and replace it when it's damaged, as it doesn't affect daily use.

Was this review help?
20
Share
Expand All
More Q&A

Where is the crankshaft sensor located on the Nissan Teana?

Nissan Teana's camshaft position sensor is installed at the junction between the engine and transmission, mounted on the transmission housing. The function of the camshaft position sensor is to collect the position signal of the valve camshaft and input it to the ECU, enabling the ECU to identify the top dead center of cylinder 1 compression for sequential fuel injection control, ignition timing control, and knock control. The methods for measuring the condition of the camshaft position sensor are as follows: 1. The camshaft sensor is generally a three-wire Hall sensor, with one 12V or 5V power line, one signal line, and one ground line; 2. Unplug the connector, turn the key to the second position, and use a voltmeter to confirm that the power line has voltage output. Use the meter to identify the ground line by connecting one probe to the confirmed power line and the other probe to the remaining two lines; the line showing voltage is the ground line, and the remaining one is the signal line; 3. Now turn off the ignition, extend the signal line, reconnect the connector, start the engine, and measure between the signal line and ground line to check for signal voltage. The output voltage should be less than the supply voltage. If no signal voltage is detected, the sensor is faulty.
111
Share

Is Adhesive Used for Engine Paper Gaskets?

Engine paper gaskets do not require adhesive application in sealing situations. Engine Introduction: An engine is a machine capable of converting other forms of energy into mechanical energy, including internal combustion engines, external combustion engines (such as Stirling engines, steam engines, etc.), jet engines, electric motors, etc. For example, internal combustion engines typically convert chemical energy into mechanical energy. The term engine can refer to either the power generation device or the entire machine including the power unit (e.g., gasoline engines, aircraft engines). Engine Maintenance Considerations: Clean the air filter. The air filter is directly related to the engine's air intake during vehicle operation. If the car has been driven on dusty roads, special attention should be paid to the cleanliness of the air filter; Remove throttle valve sludge. Generally, the throttle valve should be cleaned when the vehicle has traveled 10,000 to 20,000 kilometers; Clean injector carbon deposits. For cleaning the combustion chamber, a specialized carbon remover can be used to soften the carbon deposits on the combustion chamber and injectors, separating them from the component surfaces, and then removing the softened carbon deposits. This carbon removal method is highly effective, offering advantages such as not damaging component surfaces compared to previous direct wiping methods, and significantly improving the efficiency of carbon removal.
109
Share

What Causes the Clicking Sound When Releasing the Brake Pedal?

The causes of a clicking sound when releasing the brake pedal can vary, including aging of the brake pedal cable, air entering the brake fluid, or issues with the brake master cylinder. Aging Brake Pedal Cable: When a car has been in use for a long time, it's normal for various components to show signs of aging. If the brake pedal cable has aged, it can result in a clicking sound when the brake pedal is released. The solution to this issue is quite straightforward—simply replace the old brake pedal cable with a new one. Air in the Brake Fluid: When air enters the brake fluid, it can also cause a clicking sound when using the brake pedal. This situation requires professional equipment at a repair shop or 4S store to bleed the air from the brake fluid or to replace the brake fluid entirely. It's important to note that most cars should have their brake fluid replaced every 40,000 kilometers or so to prevent brake failure and ensure safe driving. Brake Master Cylinder Issues: The reasons behind a clicking sound due to a faulty brake master cylinder are more complex and require professional inspection and repair at a repair shop or 4S store. The brake master cylinder is a critical component of the car's braking system, and it's best to use original manufacturer parts when replacing it.
114
Share

What Causes Unusual Noises When Driving a Car?

Startup or driving when the vehicle has abnormal noise reasons are as follows. Engine abnormal noise: Abnormal noises in the engine compartment are usually sharp metallic sounds. Engine noises are mainly caused by excessive wear of some parts or improper assembly and adjustment. These noises may well indicate that the engine is about to fail, so when the engine makes abnormal noises, it is necessary to go to the repair shop in time to prevent the failure from expanding. Transmission abnormal noise: Transmission noises are generally caused by bearing or gear wear. When the car is driving and suddenly accelerating, you can hear the noise from the chassis. The gears make a "click" sound, and the bearing failure will make a "rustling" sound at this time, which will turn into a "rattling" or "whistling" sound when it is serious. Transmission repair costs are high, so it is necessary to check frequently and change the oil frequently. Body abnormal noise: It may be that the material stiffness of the body itself is not good, and after long-term use, deformation occurs, resulting in friction with other parts and abnormal noise. At this time, just stick a tape on the friction part to basically relieve it. Another reason is that long-term driving causes some parts to loosen, and then it is necessary to find the loose part and fix it.
119
Share

What is the annual inspection system for small cars?

Small and micro non-operational passenger vehicles must undergo inspection once every 2 years within the first 6 years. After exceeding 6 years, inspection is required once every year. For vehicles older than 15 years, inspection is required once every 6 months. Operational passenger vehicles: Within the first 5 years, inspection is required once every year. After exceeding 5 years, inspection is required once every 6 months. Annual inspection for medium-sized vehicles: Trucks and large, medium-sized non-operational passenger vehicles must undergo inspection once every year within the first 10 years. After exceeding 10 years, inspection is required once every 6 months. Annual inspection for motorcycles: Within the first 4 years, inspection is required once every 2 years. After exceeding 4 years, inspection is required once every year. Other vehicle types: Tractors and other motor vehicles must undergo inspection once every year. Operational motor vehicles that pass the safety technical inspection within the stipulated inspection period must repeat the safety technical inspection. Vehicles exceeding the scrapping age limit cannot be transferred but can continue to be used. For buying and selling, the vehicle owner can first obtain the vehicle's scrapping certificate from the vehicle management office before proceeding with the transaction.
120
Share

What are the effects of not completely draining old engine oil?

Small amounts of residual old engine oil have minimal impact. When changing the engine oil, it is common practice to replace both the oil and the oil filter simultaneously. The newly added oil can dilute the old oil remaining in the engine, and installing a new oil filter helps remove impurities from the old oil. Typically, there are two methods for changing engine oil: one involves draining the used oil through the oil pan drain plug, and the other uses an oil extractor to suction out the used oil from the dipstick tube. Both methods may leave some residual used oil in the engine due to its complex internal structure, but these small amounts of leftover old oil generally do not cause significant issues.
117
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.