···
Log in / Register

Can New Energy Vehicles Use the Original Blue License Plates?

1Answers
StGia
08/26/2025, 01:32:17 AM

New energy vehicles cannot use the original blue license plates; they should be registered with new energy license plates (green plates). New energy vehicles refer to automobiles that utilize unconventional vehicle fuels as power sources (or use conventional vehicle fuels with new types of onboard power devices), integrating advanced technologies in vehicle power control and driving systems, resulting in vehicles with advanced technical principles, new technologies, and innovative structures. New energy vehicles include hybrid electric vehicles (HEV), battery electric vehicles (BEV, including solar-powered vehicles), fuel cell electric vehicles (FCEV), and other new energy vehicles (such as those using supercapacitors, flywheels, and other high-efficiency energy storage devices).

Was this review help?
107
Share
More Q&A

Do I Need to Repurchase Insurance When Transferring Car Ownership?

You do not need to repurchase insurance when transferring car ownership. Simply transfer the insurance policy from the original owner to your name at the same insurance company. Below is relevant information: Procedures: When purchasing a used car, not only do you need to complete the vehicle ownership transfer process, but you also need to handle the insurance transfer. Therefore, insurance transfer is a crucial step in used car transactions. There are generally two ways to handle insurance transfer. Types: One method is to change the policyholder. The new owner can complete the insurance transfer by bringing the required documents to the respective insurance company and filling out a transfer application form. The other method is to apply for a policy cancellation, where you must pay the premium from the start of the policy to the cancellation date, and the insurance company will refund the remaining amount.
120
Share

What are the 10 basic knowledge points about tires?

Tire basics include the following points: Date: Currently, there are no national regulations on the shelf life of passenger car tires. Industry experts point out that the generally accepted shelf life of tires in the market is 3 years, which refers to the time from production to installation on your vehicle, not the time from production to complete wear and tear. Once a tire is installed on a vehicle, its service life depends on your usage and wear conditions. Grade: Each tire sidewall is molded with a speed symbol for that tire. By referring to the speed symbol, you can determine the maximum speed of the tire. For example: In the tire specification 195/65R1591V, the speed symbol is V. By checking the speed symbol and speed correspondence table, you can find that the maximum speed of this tire is 240 km/h. The label attached to Michelin tires includes the speed symbol and specific maximum speed information.
112
Share

How many points are deducted for not using turn signals when entering a ramp?

Failing to use turn signals when turning a motor vehicle results in a deduction of 1 point. Below is more information about turn signals: Introduction to turn signals: Turn signals are important indicator lights that are activated when a motor vehicle turns to alert surrounding vehicles and pedestrians. The turn signal bulbs use xenon tubes, controlled by a microcontroller circuit, which flash alternately left and right without interruption. Turn signals utilize flashers to achieve the blinking effect and can be mainly categorized into three types: resistance wire type, capacitor type, and electronic type. Function of turn signals: To alert pedestrians or other vehicles of the intended turning direction. To indicate the direction for overtaking or lane changing. When both left and right turn signals are activated simultaneously, it indicates that the vehicle is in an emergency situation, alerting other vehicles to be cautious.
110
Share

Can a patched area of a tire be patched again?

Tire patched area can generally be patched again. Here is relevant information: Method: Grind the damaged area again and apply a new patch. However, repeatedly patching the same spot may compromise the tire's safety. Additionally, if the damage is on the sidewall (the weakest part of the tire), it can be left untreated if no cords are exposed, but it's advisable to move this tire to the rear and limit its use to city driving. Function: A tire is a circular elastic rubber product mounted on various vehicles or machinery to roll on the ground. Typically installed on metal rims, it supports the vehicle body, absorbs external shocks, ensures contact with the road surface, and maintains driving performance. Tires often operate under complex and demanding conditions, enduring various deformations, loads, forces, and extreme temperatures during use.
114
Share

Does a Rear-End Collision Count as an Accident Vehicle?

To determine whether a rear-end collision qualifies as an accident vehicle, the severity of the impact must be analyzed. Here is relevant information: Accident Vehicle: A vehicle is considered an accident vehicle if there is deformation, twisting, replacement, welding, or wrinkling in components such as the left and right symmetry of the body, left front longitudinal beam, left A-pillar, right front longitudinal beam, left B-pillar, left front shock absorber mounting area, left C-pillar, right front shock absorber mounting area, right A-pillar, left rear shock absorber mounting area, right B-pillar, right rear shock absorber mounting area, right C-pillar, etc. Rear-End Collision: A rear-end collision occurs when the front of a following vehicle impacts the rear of the leading vehicle while both are traveling in the same lane. This is primarily caused by the following distance being less than the minimum safe distance, delayed driver reaction, or poor braking system performance.
113
Share

How many points are deducted for speed and gear mismatch?

In the Subject 3 driving test, a mismatch between speed and gear results in an immediate deduction of 100 points. Here are the relevant details: Test: During the Subject 3 exam, the gear and speed usage should be as follows: first gear for speeds of 0-15 km/h, second gear for 15-25 km/h, and third gear for 20-35 km/h. As long as the examinee switches between the specified speeds and gears appropriately, ensuring the gear matches the speed, it is acceptable. Light operation: Avoid quickly moving the control lever to prevent the system from failing to detect it. After activating the turn signal, hold it down to prevent it from turning off due to steering wheel movement. The light simulation test has a time limit; being too early or too late can affect the result. Do not fail on the simplest procedures. Speed and gear: Stay calm when shifting gears to avoid incorrect gear selection. Ensure the clutch is fully depressed when shifting; otherwise, gear engagement may be difficult, and nervousness could lead to stalling the engine.
115
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.