···
Log in / Register

Can I pass the subject 4 exam by only studying 500 questions?

6Answers
VanAdalynn
07/29/2025, 10:17:31 PM

You can pass the subject 4 exam by only studying 500 questions, as long as you review them carefully. Below is an introduction to the driver's license test: Driver's License Test: The driver's license test generally refers to the driver's examination (a qualification test organized by the Vehicle Management Office of the Public Security Bureau). The driver's examination (motor vehicle driver's test) is a qualification test conducted by the Vehicle Management Office of the Public Security Bureau. Only by passing the driver's examination can one obtain a driver's license and legally operate a motor vehicle. Test Process: Applicants for a motor vehicle driver's license must pass the following four subjects: the subject on road traffic safety laws, regulations, and related knowledge (Subject 1), the subject on field driving skills (Subject 2), the subject on road driving skills (Subject 3), and the subject on safe and civilized driving knowledge (Subject 4). The test sequence follows Subject 1, Subject 2, Subject 3, and Subject 3 theory (i.e., Subject 4, as there is no official term "Subject 4"). Only after passing the previous subject can one proceed to the next subject.

Was this review help?
118
Share
Fritz
08/15/2025, 04:21:43 AM

I've observed many students preparing for the Subject 4 exam, and quite a few rely solely on practicing around 500 questions to pass. From experience, this approach can indeed help you pass—for instance, some apps' 500-question sets cover high-frequency test points, and memorizing them allows for quick answering with few issues during the exam. However, I don’t fully recommend relying on this method alone. The exam question bank updates frequently, and the randomness of questions means that just drilling through questions can lead to overlooking some fundamental safety knowledge. As an instructor, I’ve seen students struggle with true/false questions and emergency scenario questions because the 500-question set might not be comprehensive enough. I suggest combining practice with studying traffic rule books to understand the principles and doing a few full mock exams before the test to minimize mistakes. In short, while it’s possible to pass this way, for a more secure outcome, broader preparation never hurts.

Was this review help?
13
Share
Expand All
LaSkylar
10/21/2025, 01:24:19 AM

When I took the Subject 4 test, I just used a 500-question APP for practice, and it worked really well—I passed smoothly. Those questions mainly covered common traffic signs and rules, basically hitting all the key points of the exam. Once you memorize them, answering becomes quite easy. However, I think the key is to practice repeatedly, especially for sections like night driving and safe distances—there are many questions, but the core content is consistent. When using the APP, don’t just memorize the answers; try simulating real driving scenarios in your mind to reinforce your memory. One thing to note: stay relaxed during the exam—don’t overstress. I’ve seen friends who relied solely on rote memorization end up making mistakes. Overall, 500 questions are enough, but spending some extra time practicing a few more sets of questions is safer.

Was this review help?
18
Share
Expand All
MacAndrew
12/04/2025, 12:50:01 AM

When my child was taking the driver's license test, I also looked into this and thought that relying solely on 500 questions might be passable but a bit risky. The exam questions are ever-changing, and a limited question pool might lead to encountering unfamiliar question types and getting stuck. I suggest that while doing practice questions, you should also think more about practical applications, such as the rules for yielding at crosswalks. Memorizing alone is not as helpful as simulating driving scenarios to aid memory. It's best to pair this with a thorough read of the basic textbook to fully understand things like light signals and emergency procedures. Don't rush and overlook comprehension—the test is the foundation for safe driving. Putting in a bit more effort to pass on the first try will give you peace of mind.

Was this review help?
10
Share
Expand All
LeMelanie
01/24/2026, 02:13:43 AM

I was busy with work, so I used the 500-question APP to cram for the fourth subject test. It was efficient but a bit risky. The small question pool saved time, and mastering the core questions could get me through, but the risk was missing some obscure questions. I recommend spending half an hour in the evening practicing questions and reviewing the textbook to fill in knowledge gaps, focusing on rules like overtaking and intersections. I used a trick: summarizing mistakes in a notebook after each practice to strengthen weak areas. Don’t just focus on the number of questions; consistent passing scores in mock exams are the most reliable. This method is hassle-free, but a more systematic review would be more reassuring.

Was this review help?
1
Share
Expand All
VanGemma
04/20/2026, 01:20:23 AM

From the examination mechanism perspective, covering most of the content with 500 questions is feasible, and the pass rate is not low, but don't expect 100% safety. The question bank is frequently updated, with many changes involving new traffic regulations or case-based questions. Simply memorizing questions while neglecting principles can easily lead to failure. I recommend combining understanding with learning—for example, understanding why maintaining a safe distance is important and grasping the rules through scenarios in the questions. When practicing, categorize and memorize—one unit for traffic signs, another for emergency situations—which improves efficiency and stabilizes your mindset. Before the exam, take more mock tests to assess your true level and address weaknesses, which is far more crucial than merely focusing on the quantity of questions.

Was this review help?
11
Share
Expand All
More Q&A

What causes water accumulation in the Song Pro car door?

The reason for water accumulation in the Song Pro car door is the absence of sealing strips around the door or improper installation of the sealing strips. Opening the drainage valve of the car door: There are usually drainage valves at the bottom edge of the car door, with three drainage valves per door. Therefore, water accumulation in the door can be drained by opening these valves. Under normal circumstances, when the car door is closed, the drainage valves are squeezed and automatically open, serving the primary function of automatic drainage. Precautions for drainage: If the car door is deformed or there is a large amount of dust, asphalt, or mud around the valves, it can lead to blockage of the drainage valves, thereby affecting the drainage rate. In such cases, pressing the drainage valve manually will widen the gap, allowing water to be drained by gently lifting the valve. Repeat this process for all three doors. Once the water is drained, the valves will lift and automatically retract.
102
Share

What is the matching method for the Besturn B70 window regulator switch?

The matching method for the Besturn B70 window regulator switch is to hold the switch until the window reaches the top and continue holding it for five seconds to complete the matching process. Structure of the window regulator: The window regulator consists of a control mechanism, transmission mechanism, window lifting mechanism, window support mechanism, as well as a stop spring and balance spring. The basic working path of the window regulator is: control mechanism, transmission mechanism, lifting mechanism, and window support mechanism. The balance spring is used to counterbalance the weight of the window, reducing the operating force. The stop spring, installed between the pinion and the support seat, is used to secure the window in the desired position. Working principle of the window regulator: When the motor is activated, it drives the reducer to output power. The active arm and passive arm, or the pulling wire rope, move the window mounting bracket, forcing the window glass to move in a straight line upwards or downwards.
112
Share

Where is the anti-theft horn located on the Venucia T70?

The anti-theft horn of the Venucia T70 is located behind the vehicle's bumper. By removing the decorative cover on the upper part of the vehicle's grille, you can see the horn. Working principle of the car horn: The car electric horn produces sound through the vibration of a metal diaphragm. When the driver presses the horn switch, current flows through the contacts to the coil, generating a magnetic force that pulls down the armature, forcing the diaphragm to move. The movement of the armature disconnects the contacts, interrupting the current and causing the coil's magnetic force to disappear. The diaphragm, along with the armature, returns to its original position due to its own elasticity and the spring plate. The contacts then close again, allowing current to flow through the coil once more, repeating the cycle. This continuous vibration of the diaphragm produces the sound. Introduction to the car horn: The horn is the acoustic signal device of a car. During driving, the driver can emit necessary sound signals as required or by regulations to warn pedestrians and alert other vehicles, ensuring traffic safety. It is also used for urging movement and conveying signals.
111
Share

Why is the Xingyue L a compact model?

Xingyue L is classified as a compact model to highlight its advantages in size, power, and configuration. Exterior design of Xingyue L: The front face of Xingyue L adopts Geely's family design style, with a larger grille compared to previous Geely models. The sporty bumper exudes a bold presence, while the side profile appears robust and solid. The character line extending from the headlights to the taillights gives the side of the body a clean and sharp look. The straight roofline also contributes to better interior space. Powertrain configuration: The Xingyue L is equipped with the Drive-E series 2.0T engine across the lineup, offering two power options. The low-power version delivers 218 horsepower and 325 N·m, while the high-power version provides 238 horsepower and 350 N·m.
115
Share

Is the 1.4T dual-clutch transmission in Lavida Plus dry or wet?

The 1.4T dual-clutch transmission in Lavida Plus is a dry dual-clutch transmission. Advantages of dry dual-clutch transmission: Dry dual-clutch transmissions are more fuel-efficient than AT transmissions, offer better handling than CVT, have high transmission efficiency, and provide quick acceleration. The structure of dry dual-clutch transmissions is relatively simple, with very low maintenance costs. When the vehicle reaches 100,000 to 150,000 kilometers, only a clutch replacement is needed. Disadvantages of dry dual-clutch transmission: Dry dual-clutch transmissions are prone to overheating and have poor wear resistance. If frequently driven in congested road conditions, the automatic transmission will frequently shift between first and second gears. Frequent clutch engagement can lead to increased heat in the clutch plates. During high summer temperatures, the engine and transmission temperatures can rise significantly, and poor heat dissipation combined with heavy-load driving can accelerate clutch wear.
117
Share

Why does BMW air conditioning not cool in auto mode but works normally in manual mode?

BMW air conditioning not cooling in auto mode but working normally in manual mode is due to the following reasons: insufficient refrigerant in the air conditioning system; the refrigerant pressure switch detects low pressure or the pressure switch is faulty; the air conditioning compressor is faulty; the air conditioning function switch is faulty. How air conditioning works: The air conditioning system compresses gaseous refrigerant into high-temperature, high-pressure gas through the compressor, which then flows through the pipes into the condenser. In the condenser, the refrigerant is cooled and condensed into high-pressure liquid refrigerant through heat dissipation by the cooling fan. The high-pressure liquid refrigerant then enters the dryer reservoir through the pipes, where it undergoes a rapid state change, turning into low-temperature, low-pressure liquid refrigerant that enters the evaporator. In the evaporator, it absorbs heat from the air flowing through it, lowering the air temperature and blowing out cold air, thereby producing a cooling effect. Refrigerant working process: The refrigerant continuously circulates in the air conditioning system to produce a cooling effect; when the compressor stops working, the refrigerant in the air conditioning system stops flowing, and no cooling effect is produced.
104
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.