Can a dented car bumper be repaired?

Why Doesn't the Emgrand GL Hold Its Value Well?

Here are the reasons why the Emgrand GL doesn't hold its value well: 1. Slightly High Fuel Consumption for a New Car: Due to its weight and powertrain, the new car's combined fuel consumption per 100 kilometers is relatively high. If frequently driven in urban areas, owners need to consider whether the fuel consumption is within their acceptable range. The old Emgrand's power and fuel consumption were quite attractive at the time, which was a significant advantage. However, this car continues to use the old Emgrand's engine while increasing the vehicle weight. As a result, the performance in terms of power and fuel consumption is not impressive, and for a next-generation model, it's quite disappointing. 2. Dual-Clutch Transmission Instability at Low Speeds: The dual-clutch transmission may be off-putting to some. The Emgrand GL's dual-clutch is among the smoother ones on the market, close to an automatic transmission. However, this doesn't mean its quality has improved. In fact, many people question the use of a dual-clutch in this model. If traffic isn't extremely congested but just slow-moving, frequent acceleration and deceleration are required, causing the transmission to frequently shift between 1st and 2nd gears, leading to jerking and surging. 3. Limited Interior Storage Space: One drawback of the Emgrand GL is the practicality of its front-row storage spaces. The main issue is the lack of suitable places for phones and wallets. There are storage slots on both sides of the center console, but they are blocked by the thighs, making it inconvenient to retrieve items while driving. The cup holders have good depth and diameter, but the small storage slot is barely useful—just the right size for keys. However, since the car comes standard with keyless entry and start, drivers don’t need to take out their keys, making the slot redundant. It would be better if the slot were larger or designed as a card slot. 4. Poor High-Speed Power Performance: The Emgrand GL's small-displacement turbocharged engine excels in mid-range acceleration, such as from 40 to 80 km/h, making it suitable for urban driving. However, acceleration at higher speeds weakens due to the small engine size and limited power reserves. During highway driving, some complaints arise. Even when downshifting early and pressing the accelerator hard, the car struggles to deliver a satisfying acceleration experience, with the speedometer needle rising rather slowly.

110

Share

How Many Years Are Vehicles Exempt from Inspection?

According to the new annual inspection regulations implemented on November 20, 2020, new 7-seat vehicles within 6 years are required to undergo an inspection every two years, without the need for an on-site inspection. Under this new policy, the scope of exempted vehicle inspections has been expanded. In addition to the existing exemption for non-commercial small and mini passenger vehicles with 6 seats or fewer within 6 years, non-commercial small and mini passenger vehicles with 7 to 9 seats (excluding vans) within 6 years are now also included in the exemption. For non-commercial small and mini passenger vehicles (excluding vans) older than 6 years but less than 10 years, the inspection frequency has been adjusted from once a year to once every two years. However, if the vehicle is involved in a fatal accident or is illegally modified and penalized, it will still be inspected according to the original cycle. After the implementation of the new measures by the Public Security Bureau, the application requirements for medium and large truck and bus driver's licenses have been optimized. The minimum age for applying for a large bus or tractor license has been lowered from 26 and 24 years old to 22 years old, respectively, while the maximum age for applying for medium and large truck and bus licenses has been raised from 50 to 60 years old. Additionally, the interval for license upgrades has been shortened. For applicants with no record of full demerit points in the corresponding scoring cycle, the required time to apply for a large bus license after obtaining a large truck license has been reduced from at least 5 years to 3 years, and the time to apply for a tractor or medium bus license after obtaining a large truck license has been shortened from at least 3 years to 2 years.

118

Share

Should the Brake Be Applied When Reversing into a Parking Space?

Reversing into a parking space can involve applying the brake, but stopping midway is not allowed as some computer systems may misinterpret it as a halt. Therefore, it's best to avoid using the brake and instead control the speed with the clutch. Below are detailed explanations regarding brake usage when reversing into a parking space: Sequence of Clutch and Brake: In these two test items, the clutch should be fully depressed first, followed by quickly pressing the brake. Since the entire process in Subject 2 is conducted in first gear at a low speed, the vehicle won't shake. Depressing the clutch is necessary because the low speed in Subject 2 exams means that not using the clutch when reversing into a parking space could stall the engine, leading to test failure. Reversing into a parking space in Subject 2 requires stopping to shift into reverse gear, so applying the brake to stop won't result in point deductions. Moreover, one key aspect of reversing into a parking space is controlling the speed, which can be managed by using the clutch or brake. A slower speed provides sufficient reaction time and room for correction. When aligning the car body to reverse into the parking space, observe the alignment of the lower edge of the left rearview mirror with the parking space line, and then apply both the brake and clutch to stop. Introduction and Function of the Brake: The brake, also known as the decelerator, refers to the action of stopping or reducing the speed of moving locomotives, vehicles, other transportation tools, or machinery. The braking system is a mechanical device designed to slow down the speed, also referred to as a decelerator. The braking system consists of a control system, hydraulic system, and power assist system. The control system includes the pedal, handbrake, etc. The hydraulic system comprises hydraulic fluid, brake pumps, and hydraulic lines. The power assist system includes the vacuum booster. It ensures driving safety and maximizes the vehicle's power performance. At any speed, it can forcibly decelerate or stop the vehicle.

105

Share

How to Activate One-Touch Window Control for Honda Haoying?

First, open the window by pressing the button to the first position (pressing too hard will reach the second position), and release the button once the window reaches the desired position. Next, press the button firmly to reach the second position, and the window will fully open. Then, close the window by pulling the button to the first position (pulling too hard will reach the second position), and release the button once the window reaches the desired position. Finally, briefly pull the switch to the second position to automatically close the window.

109

Share

How to Remove the Transmission?

Remove the screws of the drive shaft and lower the drive shaft. Unscrew the transmission oil drain plug, drain the gear oil into a container, and tighten the drain plug after the oil is completely drained. Next, disconnect the reverse light wiring and remove the transmission cover plate inside the cabin. Then, unscrew the ground wire fixing screw and remove the ground wire. After that, release the clutch release fork. Remove the connecting screws between the transmission and the flywheel housing. Finally, unscrew the transmission support plate fixing screws and lift the transmission off the vehicle.

104

Share

How to Check the Status of a Driver's License in the System?

First, open the Traffic Management 12123 app and register by entering your ID card number, real name, mobile phone number, and other information. Click 'Agree to the Agreement and Continue'. Complete facial recognition. Upon successful facial recognition, registration is complete, and the system will directly enter the login interface. Enter your ID card number and login password. At the driver's license information section at the top of the screen, the accumulated points and clearance date are displayed directly. Click to enter. Finally, the system will display the information of the registered driver's license, including the driver's license number, document status, and other details.

106

Share