···
Log in / Register

Are there many people who scored 100 points in Subject 2?

6Answers
Bustamante
09/08/2025, 10:53:24 PM

There are quite a few people who pass Subject 2 with full marks. Here are the relevant details: Introduction to Subject 2: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skills test. For the C1 license, the test items include five mandatory components: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as S-turns). Teaching objectives and requirements: Master the basic driving operation essentials and possess the fundamental ability to control the vehicle; proficiently grasp the basic methods of field and on-site road driving, have the ability to reasonably use vehicle control components and correctly control the vehicle's spatial position, and accurately control the vehicle's driving position, speed, and route.

Was this review help?
108
Share
VanJesse
09/20/2025, 03:46:19 AM

Back when I was taking the driving test for Subject 2, scoring 100 points was truly rare. Among dozens of test-takers at the exam center, only one or two could achieve a perfect score. Most people lost points during the reverse parking or hill-start exercises, ending up with 80 or 90 points. The test items had numerous details—minor mistakes like the car body crossing the line or stalling would directly deduct points, making the pressure immense. My friend, who usually practiced exceptionally well, got so nervous during the exam that he only scored 85 points and nearly cried. Don’t obsess over a perfect score; passing is what matters. The key to getting a driver’s license lies in mastering safe driving skills. More practice at the driving school and staying calm are the real secrets. Looking back now, the sweat and anxiety during training were all worth it—the confidence gained from driving on the road is far more valuable.

Was this review help?
13
Share
Expand All
DelSkylar
11/03/2025, 03:09:22 AM

Having been involved in driver's license tests for many years, I've rarely seen perfect scores in Subject 2. Statistically, the average pass rate is around 70%, but the full-score rate is estimated to be less than 5%. This is mainly because the test items require high precision - for example, parallel parking must be completed in one attempt, and any minor mistake leads to significant point deductions. Common mistakes occur due to unfamiliarity with the test site or nervousness - even well-practiced candidates may experience shaky hands during the exam. I recommend taking more mock tests to identify and focus on weak areas, rather than obsessing over perfect scores. Passing is what ultimately matters. After all, what truly counts after obtaining your license is developing safe driving skills - cultivating good habits is far more important than high test scores.

Was this review help?
11
Share
Expand All
KennedyDella
12/17/2025, 03:09:25 AM

I remember when I was young and learning to drive, those who scored 100 points in Subject Two were as rare as phoenix feathers. Most people made mistakes in reverse parking or right-angle turns, dropping their scores to the 80s. The tense atmosphere in the exam venue meant that even slight deviations, like wheels crossing the line or unstable stops, would instantly deduct points. Practice was key—don’t aim for perfection, passing the test was success. Thinking back to those days, drenched in sweat during practice, the joy of getting the license after the exam is what’s most unforgettable.

Was this review help?
16
Share
Expand All
StJuliana
02/06/2026, 09:06:00 PM

As someone who pays attention to driving tests, it's rare to see people score 100 points in Subject 2. The test standards are strict, with detailed deduction points for each item. For example, deviations in reversing angles result in deductions, making high scores difficult. The overall pass rate is 70-80%, but full marks are rare. My suggestion is to practice reversing and slope operations more to enhance practical skills and not stress over scores. Safe driving starts with the basics. After passing, continue to improve your skills—smooth operations on the road are more valuable than test scores.

Was this review help?
8
Share
Expand All
VonSebastian
05/02/2026, 12:42:34 PM

Indeed, not many people score 100 points in Subject 2 of the driving test. The exam includes multiple tasks, such as parallel parking, which must be completed flawlessly in one attempt—any misstep leads to point deductions. The average score usually falls between 80 and 90. Factors like test-site pressure, operational errors, or nervous mistakes contribute to this. Among my friends who learned to drive, few achieved full marks; most passed through diligent practice. Don’t stress over the score—focus on mastering the test content, pay attention to reference points during practice, and remember that safe driving after passing is the real skill.

Was this review help?
1
Share
Expand All
More Q&A

What are the reasons for the engine fault light being on and severe body shaking?

There are several reasons for the engine fault light being on and severe body shaking: 1. Cold start: Incomplete fuel combustion leads to insufficient power, causing body shaking during cold starts. Low ignition energy requires more throttle input to meet power demands, especially when fuel and lubricant temperatures are low. 2. Suspension system: Body shaking may be related to aging suspension components. The suspension system primarily filters engine vibrations during operation; if it malfunctions, these vibrations directly transmit to the steering wheel and cabin, affecting driving. 3. Tires: When replacing tires or rims, wheel balancing is necessary. Uneven weight distribution can cause steering wheel vibration. Adding lead weights inside the rim can balance tire weight distribution if unevenness is detected. 4. Throttle body: The most common causes of car shaking are dirty throttle bodies and excessive carbon buildup in fuel injectors. After certain mileage, excessive dirt can prevent proper throttle closure or cause motor jamming, resulting in high idle speed. 5. Unstable oil pressure: Abnormal fuel pump pressure, incorrect intake pressure sensor readings, or improper operation can all lead to body shaking.
110
Share

How long after passing Shanghai Subject 3 can you take Subject 4?

After passing Subject 3, there are three scenarios for scheduling Subject 4: 1. Taking the test directly on the same afternoon; 2. Taking the test within 9 days without appointment - candidates can take Subject 4 within 9 days after passing Subject 3 by presenting their ID at the test center; 3. Scheduling after 10 days - successful scheduling depends on current test-taker volume, student priority, and temporary arrangements at the test center. The actual scenario depends on the driving school's arrangements. Subject 4, also known as the theoretical driving test or driver's theory exam, is part of the motor vehicle driver's license assessment. It mainly covers: - Safe and civilized driving operation requirements - Safe driving knowledge under adverse weather and complex road conditions - Emergency handling methods for situations like tire blowouts - Post-accident handling knowledge. The Subject 4 test consists of 50 questions presented in case studies, images, and animations, with a maximum score of 100 and a passing score of 90.
102
Share

Why does the car always stall when starting from a stop on an uphill slope?

Here are the specific reasons why the car shakes and stalls when starting on a slope: Insufficient throttle during slope start: When starting on an uphill slope, if you don't apply enough throttle, the idle speed may be insufficient to move the vehicle, causing it to stall. If the car starts rolling backward, you must first press the brake and clutch to stop the car completely before restarting. Releasing the clutch too quickly: When starting on a slope, slowly release the clutch pedal with your left foot until the car starts to shake. At this point, hold the clutch pedal steady to confirm if the car has enough forward momentum. Do not continue to release the clutch pedal further to prevent stalling. Once the car starts moving forward, fully release the handbrake with your right hand and gradually apply throttle. Prolonged throttle application during acceleration: Avoid keeping the throttle pressed for too long while the clutch is partially engaged during the starting process. Poor coordination between throttle and clutch: The correct sequence is to apply throttle first, then release the clutch. When braking, press the brake first, then the clutch. If you keep pressing the brake to a certain extent, the car body will shake, indicating that the engine can no longer drive the gears due to the braking resistance. At this point, you need to press the clutch to cut off the engine's power transmission and prevent stalling.
115
Share

Will I get penalty points for an average speed of 107 in a 100 speed-limited zone with interval speed measurement?

An average speed of 107 in a 100 speed-limited zone with interval speed measurement will not result in penalty points. Highway speed measurement employs a set of detection equipment, typically installed at both ends, often near toll stations. Previous testing used a "point capture" method, but with improvements in speed measurement devices, it has now changed to "line control." This means two adjacent monitoring points are set up on the same road section, using license plate recognition technology to automatically compare vehicle plates. Based on the road distance and the vehicle's passing time, the average speed is calculated, which serves as the standard for determining speeding. According to relevant regulations: 1. Speeding below 10%: A warning is issued during the annual inspection, with no penalty points or fines. 2. Speeding between 10% and 20%: 3 penalty points and a fine of 100 yuan. 3. Speeding between 20% and 50%: 6 penalty points and a fine of 200 yuan. 4. Speeding over 50%: 12 penalty points, a fine of 200–2000 yuan, temporary license suspension, and mandatory training.
102
Share

How long can a truck's annual inspection be delayed?

The annual inspection of a truck cannot be delayed for more than 30 days, and the inspection must be completed within the same month. Below are the specific details about vehicle annual inspections: 1. Required documents: the vehicle's registration certificate, valid compulsory insurance policy, and vehicle and vessel tax receipt. 2. Inspection period: The vehicle owner can apply for an inspection compliance mark at the local vehicle management office up to three months before the expiration of the vehicle's inspection validity period (for passenger cars manufactured after September 2012, the inspection interval is every 6 years). The inspection should be conducted within three months before the registration expiration date on the vehicle's license. 3. Inspection regulations for different vehicles: (1) For commercial passenger vehicles, an annual inspection is required within the first 5 years; after 5 years, inspections are required every 6 months. (2) For trucks and large or medium-sized non-commercial passenger vehicles, an annual inspection is required within the first 10 years; after 10 years, inspections are required every 6 months. (3) For small and micro non-commercial passenger vehicles, inspections are required every 2 years within the first 6 years; after 6 years, annual inspections are required; after 15 years, inspections are required every 6 months.
109
Share

How to Reset the Maintenance Light on a 2015 Ford Escort?

Method to turn off the maintenance light on a 2015 Ford Escort model: 1. Turn on the ignition switch without starting the engine. 2. Close all four doors. 3. Turn on the central control information display, then click the settings button on the central control screen. 4. When you see the information option displayed on the central control screen, press and hold the information option key without releasing it. 5. Continue holding until the input password box option appears on the central control display, then release your hand and enter the password 75315908. 6. After successful input, the screen will display the message "This maintenance reset." 7. Click the confirm button, and the maintenance light reset operation is completed.
102
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.