How to Reset the Maintenance Light on a 2015 Ford Escort?

[VonIsla]

Method to turn off the maintenance light on a 2015 Ford Escort model: 1. Turn on the ignition switch without starting the engine. 2. Close all four doors. 3. Turn on the central control information display, then click the settings button on the central control screen. 4. When you see the information option displayed on the central control screen, press and hold the information option key without releasing it. 5. Continue holding until the input password box option appears on the central control display, then release your hand and enter the password 75315908. 6. After successful input, the screen will display the message "This maintenance reset." 7. Click the confirm button, and the maintenance light reset operation is completed.

[DeLeah]

As a Ford owner, I've also encountered the issue of the maintenance light coming on. Resetting it for the 2015 Escort is actually quite simple: First, turn the key to the OFF position to shut off the engine, then press and hold the OK button on the right side of the steering wheel without releasing it. Next, turn the key to the second position, where the dashboard lights up but the engine doesn't start. Continue holding the OK button for about 10 seconds, and you'll see a maintenance reminder pop up on the dashboard. Don't release the button immediately—wait until the prompt disappears before letting go. Finally, turn off the key and restart the car, and the wrench symbol will be gone! It's important to maintain continuous pressure on the OK button; if you release it midway, you'll have to start over. I recommend doing this during the day for better visibility of the dashboard display. If it doesn't work after two attempts, it might be a button contact issue, and you can visit a repair shop for a computer reset. Also, remember to stick to your maintenance schedule even after resetting the light!

[DelPeter]

I helped a friend with this before. Resetting the maintenance light on a 2015 Ford Escort requires three steps: First, make sure the car is completely turned off with the key in the LOCK position. Press and hold the OK button on the multifunction steering wheel with your right thumb while turning the key to the ACC power-on position with your left hand. Continue holding the button for about 15 seconds until the English prompt "Maintenance Reset" appears on the center display, then release. The key is to press the button firmly without shaking. If it fails, don’t worry—it might be due to insufficient pressing time or incorrect power-on timing; just try again. After a successful reset, wait a few minutes before starting the engine to confirm. Also, note that newer Ford models require computer resetting, so manual operation for older cars is actually convenient. For regular maintenance, always use genuine engine oil for better engine performance.

[Xavier]

The operation is quite simple: After turning off the car, hold down the OK button on the steering wheel without releasing it; turn the key to the power-on position; continue holding the button until the dashboard displays the maintenance reset; then release the button to complete the process. The whole procedure takes just about ten seconds. If you notice the maintenance light is still on, it might be because the operation was too quick or the button wasn't pressed firmly enough. In most cases, you can handle it yourself without needing to visit the 4S shop. Remember to change the engine oil approximately every 5,000 kilometers, as the maintenance light serves as a reminder for this. My car has nearly 100,000 kilometers now, and regular maintenance has indeed helped keep the engine in better condition.

[DiPaul]

I've been driving my older model Escort for over five years. Here's how to reset the maintenance light: After completely turning off the engine, press and hold the OK button on the right side of the steering wheel with your finger. Simultaneously turn the key to the ignition-on position (dashboard backlight will illuminate). Continue holding for about 8-10 seconds until you see the maintenance reminder flash and disappear. Then release the button, turn off the ignition and restart - the wrench icon will be gone. Special note: This must be done when the engine is cold, as electronic systems may respond slowly when hot. During my first attempt, I failed twice because I released the button too quickly due to nervousness, but succeeded when I held it steadily. Maintenance should be performed every six months or when reaching the mileage limit. After resetting, remember to set a reminder on your phone.

[Joy]

I've encountered this issue before. The key to resetting is timing: first, ensure the car is completely powered off, then firmly press and hold the OK button on the steering wheel with your right hand without releasing. With your left hand, turn the key to the ignition-on position, where all dashboard lights are on but the engine isn't running. Hold for about 12 seconds until the central display shows an English prompt indicating a successful reset, then release. During the reset process, the dashboard backlight might flicker a few times—just ignore it. After completing the operation, restart the car and the maintenance light will go off. Some friends report it didn't work, most likely because they didn't hold long enough or didn't press the button before powering on. A 15-year-old car should have its transmission fluid replaced by now, so you might as well ask the mechanic to check the onboard computer during maintenance.