···
Log in / Register

What is the correct way to store the MEGACOR FASTest BRUCELLA Canis test components and samples?

1Answers
DeMackenzie
12/17/2025, 11:42:59 AM

To ensure accurate results with the MEGACOR FASTest BRUCELLA Canis test, proper storage of components and samples is essential. Here's a breakdown of the storage guidelines:

Test Kit Components:

  • Test cassettes: Store in their foil pouch until ready for use.
  • Buffer diluent: Keep in the provided dropper bottle.
  • Ensure all components reach room temperature before use.
  • Dispose of used components as potentially infectious waste.

Specimen Material:

  • The test uses whole blood (WB), plasma (P), or serum (S) from the dog.
  • Approximately 25 µl of warm WB, P, or S is needed.
  • Avoid native blood without anticoagulant to prevent issues like micro agglutination.
  • Test non-cooled WB, P, or S within 4 hours. If stored at 2–8 °C, they can be kept for up to 4 days.
  • Plasma and serum samples can be stored at −20 °C or colder.
  • Mix the sample material well before use.
Was this review help?
119
Share
More Q&A

How to replace the light bulb in your Kmart 43226122 Anita Table Lamp?

Replacing the light bulb in your Kmart 43226122 Anita Table Lamp is straightforward. Always prioritize safety. Here's a step-by-step guide: Safety First Power Down: Before you begin, switch off the lamp and unplug it from the power outlet. Let it Cool: If the lamp was recently on, give the bulb at least 10 minutes to cool down. Remove the Old Bulb: Carefully unscrew and remove the old bulb from the lamp holder. Handle the bulb gently to prevent breakage. Insert the New Bulb: Insert a new Max 40W E27 Edison bulb (not included) into the lamp holder. Ensure it's securely in place. Reassemble if Needed: If any parts were removed during bulb removal, reassemble them now. Power Up: Plug the lamp back into the mains supply. Final Checks: Make sure the lamp is stable and the new bulb is working correctly. Refer to your lamp's instruction manual for additional safety information. If you're uncomfortable with any step, consult a qualified electrician.
120
Share

How can I best maintain and store my Draper 70811 3 Tonne Trolley Jack for lasting performance?

To ensure your Draper 70811 3 Tonne Trolley Jack provides reliable service for years, proper maintenance and storage are essential. Here’s a guide to help you: Maintenance: Regularly clean your trolley jack to prevent dirt accumulation. Lubricate all moving components at consistent intervals for smooth operation. Before each use, carefully inspect for any damaged or loose parts; do not use if defects exist. Maintain the correct oil level, using appropriate hydraulic oil and avoiding brake fluid. Consider changing the oil after significant use to extend the jack's lifespan. To prevent corrosion when not in use, fully retract the lifting arm and consider applying an anti-corrosion product to the pistons. Storage: Store the trolley jack in a clean, dry location to prevent rust and damage. Keep it out of reach of children to ensure safety. Remove the operating handle before storage. When the jack reaches the end of its useful life, dispose of the oil according to local regulations.
108
Share

How do I collimate my Newtonian reflector telescope with the Orion 7358 Quick-Collimation Cap?

Collimating your Newtonian reflector telescope with the Orion 7358 Quick-Collimation Cap is a straightforward process. Here's a step-by-step guide to help you achieve optimal optical performance: Insert the Collimation Cap : Begin by inserting the Orion Quick-Collimation Cap into the 1.25” focuser of your telescope. Prepare for Collimation : Ensure you're in a well-lit environment and orient the telescope horizontally. Place a white sheet of paper inside the telescope tube, opposite the focuser. Check Initial Alignment : Remove the eyepiece and look into the focuser. Verify that the secondary mirror is centered and that the reflections of the primary and secondary mirrors are roughly aligned. Align the Secondary Mirror : Use the adjustment screws on the secondary mirror holder to center the reflection of the primary mirror within the secondary mirror. Align the Primary Mirror : Adjust the primary mirror using its collimation knobs to center the secondary mirror's reflection within the primary mirror. Loosen the locking thumbscrews at the back of the optical tube before making adjustments. Finalize Adjustment : Once aligned, lightly tighten the locking thumbscrews to secure the primary mirror in position. Perform a Star Test : Point your telescope at a bright star. Center the star in your eyepiece and defocus the image. If the telescope is correctly collimated, you should see perfectly circular diffraction rings. Warranty Information : The Orion product comes with a one-year limited warranty against defects. For warranty claims, provide proof of purchase when contacting Orion Telescopes & Binoculars. By following these steps, you can use the Orion 7358 Quick-Collimation Cap to effectively collimate your telescope. Refer to the full instruction manual for more detailed information.
111
Share

How can I monitor the battery life of my Milwaukee M12 POAL Area Light to know when to recharge it?

The Milwaukee M12 POAL Area Light features a built-in fuel gauge to help you easily monitor the battery's charge level. This gauge uses four LED lights to indicate the remaining battery life. Here's what each LED display means: When the light is on, a flashing LED indicates 10% or less battery life remaining, one LED represents 20-40% charge, two LEDs show 40-60% charge, three LEDs display 60-80% charge, and four LEDs signal a full 80-100% charge. By simply observing the fuel gauge LEDs, you can readily determine when it's time to recharge your Milwaukee M12 POAL Area Light's battery.
116
Share

Can I connect multiple FEIT Electric 4 ft 120W Daylight High Output LED Shop Lights together?

Yes, you can link multiple FEIT Electric shop lights to create a more extensive lighting arrangement. Here's how: To connect the shop lights, follow these steps, as per the instruction manual: Chain and V-hook Installation : First, install the provided V-hooks directly onto your ceiling, ensuring the correct spacing for the fixtures. Next, attach the chains to the V-hooks and insert the hooks into the mounting holes located on the top of the shop light fixture. Hang the shop light by connecting the chains to the pre-mounted V-hooks on the ceiling. Plug the power cord into a power outlet, or connect it to another shop light to create a chain. Use the pull chain switch to turn the shop light on or off. Finally, tidy up and secure any excess cord by using zip ties to attach it to the chain. Flushmount Installation with Screws : Begin by installing the provided screws directly onto your mounting surface, spacing them correctly. Then, mount the shop light fixture to the surface by inserting the keyhole slots on the top side of the fixture into the mounting screws. Adjust the tightness of the screws until the shop light is securely held in place. Plug the power cord into a power outlet, or connect to additional shop lights. Control the fixture with the pull chain switch. By following these instructions, you can easily connect and arrange multiple FEIT Electric shop lights to create the desired lighting setup.
116
Share

How to correctly charge a BS BATTERY 2022-07 Lithium Battery

To ensure your BS BATTERY 2022-07 Lithium Battery performs optimally and lasts, follow these charging guidelines: First, adhere to the instruction manual. Do not exceed a charging current greater than 50% of the battery's capacity to prevent damage from overcharging. If the battery feels hot during charging, pause and let it cool before resuming. Always remove the battery from your vehicle before charging. Use a motorcycle battery charger appropriate for the battery's size and type, with an output current equal to 1/10th of the battery’s rated capacity. After charging, allow the battery to rest for 1 to 2 hours before checking the voltage. If the voltage is below 12.8 volts, additional charging is required. Following these steps will help you properly charge your BS BATTERY 2022-07 Lithium Battery, maximizing both its performance and longevity.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.