···
Log in / Register

what is a 1976 half dollar coin worth

1Answers
VanElla
12/01/2025, 03:22:02 AM

The provided search result context, which includes website navigation and a blog post title, does not contain specific pricing information for the 1976 half dollar coin. Therefore, the following information is based on general numismatic knowledge.

The value of a 1976 half dollar, which is a special Bicentennial issue featuring a dual date of 1776-1976, depends heavily on its composition and condition. There are two primary versions of this coin.

The most common version is the copper-nickel clad coin, which was produced for general circulation at the Philadelphia (no mint mark) and Denver (D mint mark) mints. Hundreds of millions of these were minted, and they are frequently found in circulation. In typical circulated condition, these coins are worth only their face value of 50 cents. If a coin is in pristine, uncirculated condition, it might be worth a few dollars to a collector.

The second version was struck for collectors at the San Francisco mint (S mint mark) and contains 40% silver. These were sold in special mint and proof sets and were not intended for circulation. The base value of these silver coins is tied to the current spot price of silver, so their worth will fluctuate but will always be significantly more than face value. Uncirculated and proof versions of the silver 1976 half dollar carry an additional premium based on their condition, with high-grade, professionally certified examples fetching higher prices.

In summary, a standard 1976 half dollar found in pocket change is worth 50 cents. However, if it has an "S" mint mark, it is a silver collector's coin with a value based on its silver content and numismatic premium.

Was this review help?
105
Share
More Q&A

How do I change the spray pattern on my SUNJOE SJ-APS-1G-RM Cordless Sprayer?

Changing the spray pattern on your SUNJOE SJ-APS-1G-RM Cordless All Purpose Chemical Sprayer is straightforward. First, power off the unit. Next, find the adjustable nozzle located at the tip of the spray wand. To modify the spray, simply rotate this nozzle. You'll be able to switch between a focused jet stream and a broader fan spray, giving you flexibility for various tasks. After setting your preferred pattern, turn the sprayer back on to begin. Remember to maintain a safe distance from what you are spraying to avoid splashback, and avoid spraying in windy conditions or towards people or animals. For detailed guidance, including safety advice, consult the "Spray Adjustment" section in the SUNJOE SJ-APS-1G-RM Cordless All Purpose Chemical Sprayer Instruction Manual.
106
Share

How do I replace the carbon brushes on my HILTI DD 110-D Diamond Core Drill?

To replace the carbon brushes on your HILTI DD 110-D Diamond Core Drill, follow these steps: First, unplug the power cord from the outlet to ensure your safety. Next, locate and open the carbon brush covers on both the left and right sides of the motor housing. Before removing the old brushes, take note of their orientation and how the conductors are positioned; this will aid in the correct installation of the new brushes. Carefully remove the worn carbon brushes from the drill. Insert the new carbon brushes, ensuring they are placed in the same position as the old ones and are securely seated. Be careful not to damage the insulation on the indicator lead during insertion. Close the carbon brush covers and tighten the retaining screws. To properly seat the new brushes, run the machine under no load for at least one minute without interruption. After this run-in period, the service indicator lamp should turn off. For detailed illustrations and further information, consult the "Replacing the carbon brushes" section in the HILTI DD 110-D Diamond Core Drill Instruction Manual.
114
Share

How do I replace the bandsaw blade on my HILTI NCT 85 C-22 cordless cable cutter for copper and aluminum?

Replacing the bandsaw blade on your HILTI NCT 85 C-22 Copper/Aluminum cordless cable cutter is straightforward. Follow these steps for a safe and effective replacement: First, loosen the two screws that secure the blade cover and remove the cover entirely. Then, unscrew the side handle by turning it counterclockwise, detaching it from the bandsaw's casing. Next, rotate the clamping lever 180 degrees in the direction of rotation until it rests against the stop. Carefully insert the new bandsaw blade into the cutting guide, ensuring it slides into the blade guides one at a time. The back of the blade should be touching the bearings at the base of the guides. Pay close attention to the direction of rotation indicators on both the blade and the bandsaw itself; they must align. Proceed to place the blade over both rollers, doing one at a time. Once the blade is in place, pivot the clamping lever another 180 degrees in the direction of rotation, securing it against the stop. Double-check that the bandsaw blade is correctly positioned over both rollers. Finally, reattach the blade cover, making sure it fits properly, and reinstall the side handle. For visual aids and more detailed information, consult the HILTI NCT 85 C-22 Copper/Aluminum cordless cable cutter - Hydraulic Cutters Instruction Manual.
102
Share

Need assembly instructions for the URTR T-01685-E Twin Size Daybed with Pop Up Trundle?

Absolutely! To assemble your URTR T-01685-E Twin Size Daybed with Pop Up Trundle Upholstery Daybed Sofa Bed, begin by consulting the detailed assembly manual included with your purchase. Here's a general overview to get you started: First, check that you have all parts and hardware by referencing the Part List (WF290928) and Hardware List. Assemble the main daybed frame by connecting the side panels to the back panel, using screws and bolts, ensuring they are tightly secured. Then, attach the front panel to the side panels, again using screws and bolts, tightening them properly. Next, focus on the pop-up trundle frame. Attach its side panels to the back panel with screws and bolts. Follow this by attaching the front panel to the trundle frame's side panels. After both frames are built, place the trundle frame inside the daybed frame, ensuring a good fit and alignment. Secure the trundle frame to the daybed frame using the provided screws and bolts, tightening them carefully. Finally, attach the upholstery to both frames as directed in the manual, which might involve stretching and securing fabric or using hooks and fasteners. For the most precise guidance, including diagrams, always refer to the complete instruction manual that came with your URTR T-01685-E Daybed.
101
Share

How do I network my Hanwha Techwin HRX-1632 DVR for remote access?

Connecting your Hanwha Techwin HRX-1632 Digital Video Recorder to your network enables remote monitoring. Here's how: Ensure you have a functioning network router or switch. Locate the 'NETWORK' port on the back of your HRX-1632 DVR. Plug one end of an Ethernet cable into the 'NETWORK' port. Connect the other end of the Ethernet cable to an available LAN port on your router or switch. Power on your Hanwha Techwin HRX-1632 DVR. Wait for the DVR to boot up. On a computer connected to the same network, open a web browser. Enter the IP address of your HRX-1632 DVR into the browser. You can find this IP address in your router's settings or by using the Hanwha Techwin web viewer software. Log in to the HRX-1632 DVR using the default administrator ID, which is 'admin', and the password you set during initial setup. Configure the network settings within the DVR, including IP address, subnet mask, gateway, and DNS settings. Consult your HRX-1632 DVR's manual for specific configuration steps. Once configured, you should be able to access your Hanwha Techwin HRX-1632 DVR remotely using a computer or mobile device connected to the same network. Note: These steps provide a general guide. Refer to your Hanwha Techwin HRX-1632 DVR's manual for detailed instructions and troubleshooting specific to your setup.
102
Share

How to Assemble a Style SELECTIONS Blue Push Button Tilt Market Patio Umbrella?

Assembling your Style SELECTIONS UCS181A-NY 7.5 ft Blue Push Button Tilt Market Patio Umbrella is straightforward. First, unpack all the components and verify them against the parts list. Next, connect the lower and upper pole sections, ensuring the push button on the lower section aligns with the hole on the upper section. Insert the assembled pole into your umbrella base or stand, making sure it's secure. Attach the umbrella canopy to the pole's top, sliding it down until it rests on the ribs. The push button tilt mechanism, usually found near the top of the pole, allows you to adjust the canopy's angle. Push the button to activate the tilt, then manually position the canopy. Finally, use the push button mechanism to open and close the umbrella. For detailed instructions, consult the product's manual. For additional help, contact customer service at 1-877-888-8225 or visit www.lowespartsplus.com.
113
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.