
To properly wire and mount your HINKLEY 82000 Superior Lighting Fixture, follow these steps:
Preparation: Begin by finding a clean workspace and unpacking the fixture and glass components from the packaging. It's essential to review the provided instructions thoroughly before you begin.
Mounting the Mounting Strap: Detach the mounting strap (A) from the backplate (E) by unscrewing the ball knobs (F).
Attaching the Mounting Plate: Secure the mounting plate (A) to your junction box (J) using two screws (C). Please note that screws are not included with the fixture.
Making Electrical Connections: Connect the supply wires to the fixture's lead wires. Refer to the specific wiring instructions that came with your HINKLEY 82000 fixture for detailed guidance.
Mounting the Fixture: Align the mounting holes (D) in the backplate (E) with the two mounting screws (B). While holding the fixture in place, thread and tighten the ball knobs (F) onto the mounting screws (B).
Installing the Glass Panels: Insert the glass panels (2) up through the bottom opening of the cage (1). Position the tops of the panels into the channel (3) at the top of the cage (1), then tilt the bottoms into place, securing them with the clips (4). Repeat this process for all glass panels.
Bulb Installation: Once the fixture is securely mounted and the glass panels are in place, install the appropriate light bulb.
Grounding Instructions: Adhere to the grounding instructions specific to your installation type, whether it's flush mount, chain hung, or post-mount. These instructions are provided in the manual.
Caulking: After the fixture is mounted, seal the space between the wall and the backplate of the fixture with waterproof caulk or silicone sealant. Also, apply caulk between the mounting top and the fixture base and under the ball knobs used for mounting. Following these steps will ensure a safe and correct installation of your HINKLEY 82000 Superior Lighting Fixture.


