Installing your ZEVNI A04725 Collen 21.5-in 3-Light Black-Brass Transitional Vanity Light is a straightforward process when done safely. Here's a guide to help you, but always refer to the official ZEVNI manual for the most accurate and up-to-date instructions. First, ensure safety by turning off the power at both the circuit breaker and the wall switch. Next, prepare the fixture by unscrewing the nuts from the back plate and setting them aside. Then, thread the supply wires from your outlet box through the mounting plate and secure it to the outlet box using the provided mounting screws. Connect the wires, matching the wire colors according to the provided instructions, ensuring the ground wire is correctly connected. Use wire connectors and electrical tape to securely join the wires, then tuck them neatly into the outlet box. Align the back plate with the mounting screws and secure it using the nuts previously removed. After that, place the glass shades onto the sockets and secure them with the socket rings. Finally, insert the correct wattage light bulbs (not included) into the sockets. Double-check all connections and components before restoring power. Always prioritize safety by adhering to the manual's safety precautions, including working with the power off, using the correct voltage bulbs, and confirming the mounting surface can support the light's weight. Following these steps and the detailed instructions in the ZEVNI A04725 Collen's manual will help you safely and correctly install your new vanity light.
