Need help installing the PROMINENCE HOME 59000 LED Lighted Mirror

[ODeclan]

Installing your PROMINENCE HOME 59000 LED Lighted Mirror is a straightforward process. Follow these steps to ensure a safe and correct installation:

1. Safety First: Begin by turning off the circuit breakers and wall switch connected to the mirror. This is a critical safety measure to prevent electrical hazards.
2. Orientation: Decide how you want to mount your mirror, either vertically or horizontally. This will influence the next steps.
3. Marking the Spot: Use the appropriate mounting bracket (longer for horizontal, shorter for vertical) and a level to mark the pilot hole locations on your wall.
4. Drill Pilot Holes: Using a 1/4” diameter drill bit, drill pilot holes at the marked locations. Ensure the holes align perfectly with the mounting bracket's markings.
5. Insert Anchors: Gently tap the drywall anchors into the pilot holes using a hammer. This provides a secure base for the mirror.
6. Mount the Bracket: Attach the mounting bracket to the wall using the screws included in the hardware bag. Make sure the bracket is firmly and securely attached.
7. Wiring Connections: Carefully connect the wires as follows, matching the wire colors:
   • Black (hot) supply wire to the black wire from the fixture.
   • White (neutral) supply wire to the white wire from the fixture.
   • Bare/green (ground) supply wire to the bare wire from the fixture.
8. Hang the Mirror: Carefully lift the PROMINENCE HOME 59000 LED Lighted Mirror onto the installed mounting bracket. Ensure the bracket pre-assembled to the back of the mirror interlocks securely with the wall-mounted bracket.
9. Power On: Restore power by turning on the circuit breaker and the wall switch. Your LED lighted mirror should now illuminate.

If you have any issues or require further assistance, contact PROMINENCE HOME customer service at 1-877-706-3267.