Need help installing my ZEVNI Madolen Gold 3 Light Chandelier?

[VanKeegan]

Installing your ZEVNI A04784 Madolen 12 Inch Wide Gold 3 Light Chandelier can be straightforward with these steps. Always prioritize safety and turn off the power at the circuit breaker before beginning.

Pre-Installation Steps:

1. Thread the fixture wires through the iron washer, plastic spacer, glass shade, and cover.
2. Connect the quick link to the chain and loop found on the cover.
3. Carefully weave the fixture wires through the chain, alternating in and out of each link.

Installation Guide:

1. Remove the collar ring from the collar loop and secure the single bar to the outlet box.
2. Position the canopy over the collar loop and fasten it with the collar ring.
3. Pass the chain through the collar ring and the canopy.
4. Attach the quick link to the collar loop and guide the fixture wires through to the top of the threaded section.
5. Connect the wires according to the provided wiring diagram, and then secure the canopy.
6. Install the light bulbs (not included), ensuring you do not exceed the maximum wattage specified.

Final Steps:

1. Double-check all components to ensure they are securely installed before restoring power to the circuit.

If you experience any issues, refer to the ZEVNI Madolen Gold 3 Light Chandelier's instruction manual or contact ZEVNI customer support for assistance. If you are unsure at any point, consult with a qualified electrician.