Absolutely. Here's a step-by-step guide to cutting and installing your ClarkDietrich BS-10 Big Stick Composite Corner Bead for a professional finish: First, you'll need to cut the Big-Stick. Measure the wall height and subtract 1/2 inch. Use either scissors or a utility knife to cut the Big-Stick to this required length. Remember to cut the ends of the Big-Stick at a 45-degree angle to ensure a proper fit. Next, installation. Apply a smooth, generous coat of all-purpose compound to the corner using a 4-inch or 5-inch taping knife. Press the Big-Stick into the wet compound, making adjustments as needed to create a perfectly straight line. Wipe down firmly with your taping knife, applying a bit more pressure on the outer edges of the Big-Stick. Immediately follow with a light skim coat of compound over the surface, wiping it down tightly and smoothly. Allow the compound to dry completely for several hours, or preferably overnight. For the final coat, apply a finishing coat of compound using a 6-inch or 8-inch taping knife, feathering the compound beyond the edges of the previous coat. Let this final coat dry completely for several hours or overnight. Once dry, lightly sand the surface with 120-grit sandpaper. The ClarkDietrich BS-10 Big-Stick won't fuzz up like paper or mesh tapes, giving you a remarkably smooth finish. By following these steps, you'll be able to install your corner bead effectively and efficiently.
