
Absolutely! Installing the JVA ST113 Large Solar Kit involves a few key steps. First, unpack your kit and find the U-Bolts included. Next, use the provided washers, spring washers, and hex nuts to attach the U-Bolts to the top and bottom panel of the bracket. Now, mark on your mounting pole where the top U-bolt will sit. Slide the U-Bolts over the pole and tighten them once the top bolt aligns with your mark. Gently loosen, but do not remove, the six bolts located inside the frame. Lift the bottom of the Solar Panel until the attached arms form a 90-degree angle, then tighten all six bolts, and ensure the panel is facing north. If you own a JVA Energiser, you can mount it between the solar panel and the pole using the included screws. Then, connect the JVA energizer to the solar panel lead. The energizer's alligator leads and plug pack will not be used in this configuration. Attach the red and black ring terminals to your . Alternatively, you can connect the energizer directly to the battery using the alligator leads provided. For guidance on selecting a suitable battery, please visit the JVA website at https://www.jva-fence.com.au/solar.php. Following these steps carefully will help you successfully install your JVA ST113 Large Solar Kit for effective performance.


