
To correctly wire your HINKLEY 1765 Edgewater outdoor wall light with a 0-10 volt LED dimmer, prioritize safety and follow these steps: First, always turn off the power supply before beginning any electrical work. Next, connect the black wire (B) from your junction box to the black wire (B) from the fixture. Then, connect the white wire (W) from the junction box to the white wire (W) from the fixture. Following this, connect the gray/pink wire (G) from the junction box to the gray/pink wire (G) from the fixture. After that, connect the purple wire (P) from the junction box to the purple wire (P) from the fixture. Finally, connect the ground wire from the fixture to the ground on the mounting hardware. If you are using an incandescent dimmer, always refer to the manufacturer's specific instructions. It's crucial to cap off the gray and purple wires from the fixture inside the canopy to prevent short circuits and potential fixture failure. For more detailed guidance or if you're dealing with new wiring, consulting a qualified electrician or local authorities is highly recommended to ensure compliance with all electrical codes.


