Need help assembling the aivituvin AIR 26 Rabbit Hutch? Assembly guide

[DelPaul]

Assembling your aivituvin AIR 26 Rabbit Hutch is straightforward. Here's a step-by-step guide to help you: First, attach the front (Part K) and roof panels (Part L) to the side panels (Part J) using 10 screws (P2) to create the small house. Repeat for the second house. Next, secure the ramp (Part I) to the layer (Part G) with 2 screws (P4). Then, assemble the two seesaws, using 2 screws (P2) each. After that, attach the side panels (Part C & D) to the front panel (Part A) using 4 screws (P1), aligning them with the dowels. Now, attach the back panels (Part B) to the side panels, again using 4 screws (P1) and aligning with the dowels. Slide in the tray (Part E), and then place the lower layer into the slot of the back and side panels, followed by the upper layer. Position the small houses on the layers and insert the seesaws into the cage. Add the chewing toy (P6) and bowls (Part O & P). Finally, attach the roof (Part F) to the back panel using 6 screws (P3). Fix the hook eye to the left side panel and tie the rope to the eye hook. Always refer to the aivituvin AIR 26 instruction manual for detailed visuals. For any assembly issues or questions, contact aivituvin customer service at [e-mail].