How to Properly Bleed the C10 Circulation Pump

[JasmineLee]

Bleeding the C10 circulation pump is vital for maintaining peak performance by eliminating air from the system. Here's a user-friendly guide to bleed your pump, based on typical user manuals: First, turn the main switch of the control unit to the OFF position (0). Then, open the automatic bleeder valves, which are usually located on the flow pipe and within the pipe system. You'll find these by turning the black xxxx on the side. Important: Do not close these valves while the unit is running. Next, open the shut-off valve on the supply line. Install shut-off valves before and after the C10 circulation pump. Close the shut-off valves on the bypass pipe to ensure the water circulates directly through the pump. Air will escape through the bleeder valves; you can speed up this process by operating the valves on the integrated drinking bowls, if applicable. Repeat the bleeding process as necessary until all air is fully purged from the system. A crucial reminder: Never operate the circulation pump without water, as this can cause serious damage to both the pump and the heating element. Always follow these steps carefully to ensure your C10 circulation pump operates efficiently and reliably.