Installing the HINKLEY 17469 Beacon Hill 30 Inch Tall Heritage Outdoor Wall fixture involves several key steps. First, prepare your workspace by unpacking the fixture and glass components. Remove the mounting plate (A) from the backplate by unscrewing the side screws (S). Attach this mounting plate to your wall's junction box using two 8-32 screws (not included), adjusting for optimal placement. Next, use the inspection cable (0) on the backplate to temporarily hang the fixture on the mounting plate. Connect the wiring according to the detailed instructions in the IS-18 instruction sheet. Once wired, align the backplate with the mounting plate and secure it with the screws (S) previously removed. For added stability, utilize the holes (E) on the mounting plate with appropriate wall anchors. Always prioritize safety: review the wiring and grounding instructions (I.S. 18) and ensure the power is off during installation. To install the glass panels: begin by unscrewing the four corner screws (1) to remove the bottom panel (2) from the cage assembly (4). Then, carefully slide out the existing glass panel. Insert the new glass panel, ensuring it fits snugly within the channels of the uprights, and remount the bottom panel with the screws. Finally, to weatherproof your installation, apply waterproof caulk or silicone sealant to seal the gap between the fixture's backplate and the wall. Also, caulk the gap between the mounting top and fixture base, and apply a small bead under the ball knobs. Following these steps ensures a secure and properly installed HINKLEY 17469 Beacon Hill outdoor wall fixture.
