How often should I clean my ClearWater II Cartridge Filter System

[ValeriaLee]

To keep your pool water sparkling with the ClearWater II Cartridge Filter System, cleaning your filter at the right time is key. According to the ClearWater II owner's manual, you should clean your filter when the pressure gauge reads 5 PSI or more above your starting pressure. Always consult your manual for your specific model's starting pressure. The ClearWater II system features a 1-2-3 Safety Locking System to make filter maintenance straightforward and safe. Here's how to clean your filter:

1. Power Down: Turn off the pump before any maintenance.
2. Isolate the System: Either plug the skimmer and pool return lines or lower the water level below the pool return line.
3. Release Pressure: Slowly open the air release on top of the filter until the pressure gauge reads 0 PSI.
4. Drain the Filter: Open the drain cap at the bottom to empty the water.
5. Unlock the Lid: Press the yellow safety latch on the underside of the locking nut and turn the nut counterclockwise to remove the lid.
6. Rinse the Cartridge: Use a garden hose to rinse the cartridge element thoroughly. There's no need to remove the element from the filter housing.
7. Reassemble and Restart: Put the lid back on and follow the startup procedures detailed in your original ClearWater II instructions.

By monitoring the pressure gauge and following these steps, you'll ensure your ClearWater II Cartridge Filter System operates efficiently, providing you with clean and clear pool water. Remember to regularly check your starting pressure to know when it's time to clean your filter.