How do I test my Ei407 Manual Call Point to make sure it works?

[StMia]

To ensure your Ei407 Manual Call Point is functioning correctly, follow these steps: First, verify that the light on the front of the call point flashes green every 40 seconds. This indicates the device has power. Next, press the black spot on the call point. The white element should drop down, revealing a yellow edge, which confirms activation. The light will turn red and stay on continuously for 3 seconds, then flash red every 45 seconds for 5 minutes, signaling the alarm transmission. Check that all connected RF units are in alarm. If some alarms haven't activated, repeat the House Coding procedure. To reset the manual call point, use the provided plastic key. Insert the forked end into the slots, pull the bottom housing down, remove the key, then firmly push the housing back against the back and slide upwards. If the call point isn't reset, the light will flash red every 40 seconds as a reminder. On reset, a single red light flash for 3 seconds indicates the alarm cancel signal transmission. If the light flashes amber every 9 seconds, the batteries are depleted, and the unit needs repair or replacement.